Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
(80 reviews)
Price: $130.12
In Stock
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
Item # 84556UC3
Retail:$137.52
Our Price: $130.12
You Save: $7.40
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (80)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 84556UC3
- 5 on 5 Inch
- For 3500 lbs Axles
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Hub with Integrated Drum
- Standard
- L44649
- L68149
- Dexter
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 3,500-lb trailer axles with #84 spindles
- Wheel size: 13" to 15"
- Drum dimensions: 10" diameter x 2-1/4" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 5"
- Grease cap flange diameter: 1.98"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-249-91 Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5
Replaces 84556UC3 and 84556-KIT
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Received too many
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - 84556UC3
Average Customer Rating: 4.8 out of 5 stars (80 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: James W05/25/2021
I originally received drums with incorrect bolt circles due to box contents not matching their labels. etrailer provided a shipping label for their return and had the correct drums on the way even before receiving the incorrect ones back. All bearings, races and grease seals were included in sealed packs, as well as detailed instructions. After packing the bearings with grease, as well as the hubs, final installation was simple.
by: Richard10/20/2023
Packing sucks. Boxes were torn open and taped up. Bearings and other parts bent scratched and for the 500 plus Dollars i spent would have been nice to get something other than china made bearings. Hubs and drums look ok just banged up some.
Jenny N.
10/26/2023
I apologize that it arrived this way. I will have our Customer Service team reach out to you.
by: Robert O.07/13/2016
Purchased a 7,000 Lb. trailer, but new laws required a trailer with a weight rating to have axle brakes. With the help of etrailer; I found the right parts to add brakes to my trailer. All the parts fit perfect. Thank you.
by: Eder03/03/2024
Great service and excellent website
by: Michael 12/12/2023
factory OEM and exactly what i ordered
by: Gregory02/11/2018
I was very satisfied! Everything fit like it should and the trailer tows great. I will definitely order from etrailer again!
by: Still going strong10/17/2017
I ordered new Brake Hubs and Brake backing plates. After a year and constant use, these are still holding strong. There is no substitute for 4-wheel braking on any dual axle trailer. I highly recommend upgrading any two wheel axle brakes to 4 wheel braking. They work! Thank you etrailer.
Still P.
10/17/2018
Still going strong- brakes still work perfect.
by: Harold 10/19/2023
Great help from figuring out what we needed in parts to ordering them.
by: Dan11/01/2018
On a tandem axle trailer I add brakes to the non brake axle. This matched the other brake axle perfectly.
Dan
11/7/2019
The trailer stops as well now as the day they were installed.
by: Steve A09/05/2016
Perfect fit for my M101CDN2 military trailer converting to Jeep JK 5 on 5 bolt pattern. Only complaint is the imported bearings supplied with them. Will be adding Dexter electric brakes soon.
by: Brad B07/20/2017
Purchased new backing plates assemblies and drum assemblies 2 to replace worn out parts and 2 for installation on an axle that didn't have brakes on at all. Parts fit great and have been working flawlessly for a year. Great parts, prices, and shipping time.
Thanks,
Brad B.
by: Michael McGee08/01/2016
These kits bolted on with no modification. I replaced a hydraulic surge brake system with them. The brakes perform well and the auto adjusters make it easy to keep them well adjusted.
by: Bob R.07/19/2015
Good product, easy install. Make sure to measure bolt pattern to make sure you order correct drums. Customer support is excellent as well as the how to video's! I would highly recommend this product.
Bob R.
7/18/2016
Still working fine. Good product, excellent customer support!
by: Rick N.08/14/2015
Ordered a set of four hub and drum assemblies for my 15 year old Big Tex 70DM car hauler trailer. All merchandise arrived intact and within a reasonable time. Especially liked the convenient hand holes for easy carrying of the heavy cartons. Great hardware package. The remove and replace went without a hitch (pun!) and she's back on the road. I have ordered from etrailer before and will again when the need arises.
by: William J. 03/30/2015
Very nice product. All the parts were included with the brake drums to make for an effortless installation. I've bought items from etrailer in the past and will buy from them in the future.
Good communication and quick shipping.
Prices are very reasonable.
by: JC Cason10/16/2014
Had a mixup in hub numbers. Called Amanda at etrailer, and we worked it out very satisfactorily. New parts and refund were received promptly. If I need additional trailer parts, I will certainly use your company again. The new parts worked exactly as prescribed. Thanks, JC
by: Derek M j04/11/2015
Breakers were great installed with ease. One comment though the dust/bearing caps were just a little bit to big to fit the drum I had to grind them down a little to get them on.
by: Fred08/10/2022
Dexter uses the made in USA with pride but the bearings are made in china
by: Brian m11/26/2014
All the parts I ordered arrived in two business days and in good condition. Everything to add brakes to one axle fit perfectly and worked as it should.In less than two hours after my order,I got confirmation that it had shipped.Excellent outcome from placing the order to installing the parts.I will definitely do business with Etrailer again.
by: Donald S09/03/2014
I just added trailer brakes to my BBQ trailer. These brakes a worth the money. This was my first time to install trailer brakes it took me only about an hour for the complete installation. It could have been done faster if i was younger. GREAT ITEM
by: Glenn G12/17/2014
The drum and bearing/seal package fit like a dream and your prompt shipping to my field destination was amazing. Thank you for your service. I will definitely tell others about your company and services.
by: Tom S.08/27/2014
Could not have been more pleased with the order of new electric brakes and drums for my trailer. Easy ordering and fast delivery.
Everything fit as it should.
Thank you very much.
by: Brad D.09/24/2013
The hub/drum fit fine and seems to be of good quality.
The bearings are Chinese made and I wish the assembly included only USA made bearings-seals.
by: Robin 08/22/2020
I have used Etrailer.com many times, their customer service, knowledge and shipping speed cannot be beat. Great company and staff to work with. Shipping speed and method is top notch!
by: Alan S11/10/2014
This website made it no problem for me to figure out how to select the correct brakes for my trailer. Great prices and fast shipping!
25
80
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Determining Which Replacement Hub With 5 on 5 Bolt Pattern For M416 Military TrailerThanks for the picture! To determine the correct replacement hub to give your M416 military trailer the 5 on 5 bolt pattern you are looking for, you will need to determine the inner and outer bearings your current hub uses. The easiest way to do this is by pulling one of the hubs off, and reading the bearing number stamped on the face of the bearing like on the included picture of the # L44649. If your bearings are worn to the point that you cannot read the bearing numbers, you will...
view full answer...
- How to Measure a Trailer Spindle to Pick Out a Replacement HubI wasn't able to pull up the link you sent me, but in order to determine what hubs could fit your trailer spindle you will need to take the hubs off and measure the diameter of the spindle where the bearings and grease seal ride. With that info I can set you up with a replacement hub. Usually we can determine a replacement by the bearing numbers but yours don't match what we carry.
view full answer...
- Ordering Dexter 3,500 lb Axle with 5 on 5 inch Bolt PatternI can help you get basically the same thing as the # 7359765-EB but with the bolt pattern you need but we don't have it as a complete kit. You'd need the bare axle part # 7359765, the hubs # 84556UC3, and then the brake assembly set # 23-26-27 and you'd be set!
view full answer... - Replacing Hubs on Trailer with Unusual Bolt Pattern RecommendationFirst we have to figure out what spindle you have on your trailer to determine what hub/drum could fit it and then build from there to complete the setup. To this you will need to remove a hub from the axle and either get the bearing numbers or the dimensions of the spindle where the bearings and grease seal ride. See the attached picture. From there you will want to check out the help article I attached that will walk you through the rest of steps to adding the brake assemblies to your...
view full answer...
- How to Determine the Bolt Pattern of a Trailer Wheel or HubThere isn't a bolt pattern, at least not one used any more that I am aware of, that has a 2-7/8 inch measurement from bolt hole center to adjacent bolt hole center. Could it actually be 2-3/4 inches? If so that would indicate a 5 on 4-3/4 bolt pattern. A 5 on 4-3/4 inch is still rare. I have included a link to the options we have for hubs and for wheels. I have also included a link to a help article on how to determine bolt pattern.
view full answer... - Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 BearingsI reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle. Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using...
view full answer... - How To Find Replacement Bearing Kit For Trail Star Boat TrailerVin numbers cannot be used to identify wheel bearing/axle information, as they're is no database for that. The OEM trailer manufacturer's use whatever axle they have on hand that day, so it could have a few different options. Most boat trailers have 1 of 3 possible bearing combinations, but you'll need to measure your spindle to be sure. The first is a 1" straight spindle that uses bearings # L44643 and measures 1" at bearing points on the below diagram, and uses seal # 34823 which measures...
view full answer...
- Determining Which Replacement Braking Components For Eagle Tandem Axle Boat TrailerYou are correct that you can replace the older Dico 60 surge brake actuator on your Eagle tandem axle trailer, and for that I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs # 099-175-00. For new brake lines I recommend going with the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 15' Long, 3/16" Main Line # HS496-152 which is designed specifically for tandem axle trailers. Moving on to the replacement brakes, bearings, and possibly...
view full answer... - Completing Wiring Connections At Brake Magnets When Installing Trailer Brake AssembliesYou're certainly on the right track. It doesn't matter in the least which of the two brake magnets wires carries the output voltage from the brake controller and which one is grounded to the trailer frame. Continue your installation and fear no more! Be sure to examine the inside armature surface of your brake drums, make sure the surface is smooth, and not grooved. The presence of grooves will prevent the magnet from getting a good grip on the inside of the drum, and your braking won't...
view full answer... - What is Hub Bore Diameter of Dexter Hubs # 84556UC3 and # 84656UC3The outer diameter of the center bore of the Dexter Trailer Hub and Drum Assembly, # 84556UC3 and # 84656UC3 is 2.67 inches. Most wheels that would be used with this hub would have a pilot diameter of 3.19 inches.
view full answer... - Hub and Drum for a Dexter 3,500 Lb Axle with 5 on 5 Inch Bolt PatternThe correct hub/drum for your Dexter 3,500 lb axle is more than likely going to be the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube). The L68149/L44649 bearings and 10-19 grease seal that this kit uses is fairly standard for this axle. However, there are certain instances in which this is not the case. In order to be sure you can either give me the serial number off of the white tag on the axle or read me the bearing and seal numbers off the parts...
view full answer... - Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
view full answer... - Parts Needed To Give A Dexter 3,500LB Idler Axle Electric Drum BrakesYou can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 as long as your Dexter Axle does have the Brake Mounting Flange # 4-35, otherwise you will need to have those welded on. These brakes are great as once you have them initially set you will not have to adjust them periodically. They will automatically adjust which improves braking quality and life. The Dexter Trailer Hub and Drum Assembly # 84556UC3 does use the common Bearings # L44649 and # L68149 that come on...
view full answer...
- Replacement 10 Inch 5-on-5 Bolt Pattern Brake Drums for Old Car TrailerI did a Google search on the information you found on your brake drums and wasn't able to find anything conclusive regarding a replacement. We offer one 10 x 2-1/4 inch brake drum with a 5 on 5 bolt pattern, part # 84556UC3 for a standard or # 84556UC3-EZ for an EZ-Lube spindle. If your existing hub uses an #L68149 inner and an # L44649 outer wheel bearing, either of these hubs would be compatible. The hubs include the bearings, races, seal, grease cap, wheel bolts and lug nuts. If you...
view full answer... - Can a Drum Hub Be Used with Hydraulic BrakesYes, as long as you have a 10 inch hydraulic brake assembly like our Titan Free-Backing Hydraulic Trailer Brake Assembly # T4071500 you could use the Trailer Hub & Drum Assembly # 84556UC3 with a hydraulic brake assembly.
view full answer... - Replacement Axles and Leaf Springs for Tandem Axle TrailerIt is possible the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765 will work for you, so long as your current axles are rated for 3,500 lbs, have a hub-face to hub-face length of 95" and spring center to spring center length of 80"; you can use the diagram I have added to know where you need to measure. Additionally, because this has EZ Lube spindles you will need to add Grease Caps # RG04-040 to make your Hub and Drum Assemblies # 84556UC3 compatible. As for your leaf springs...
view full answer...
- Are Wheels Available That Have A Distance Between The Lugs Of 3-1/8 InchesThe measurement of 3-1/8 inches does not match any of the trailer wheels we offer. The closest we offer is a 5 on 5 bolt pattern and that measurement is 3 inches center to center, or our wheels with a 5 on 5-1/2 bolt pattern which measures 3-1/4 inches center to center. I have attached links to our product pages for the 5 on 5 and the 5 on 5-1/2 wheels we offer you can check out.
view full answer... - 5 on 5 inch Hub Recommend for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03Yes, we do carry an idler hub and and a hub and drum assembly with a 5 on 5 inch bolt pattern that will work on the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03. For an idler hub you would want the part # 84550BX and for a hub and drum you would want the part # 84556UC3.
view full answer... - Replacement Wheel Studs for Dexter Trailer Hubs 8-249For a Dexter trailer hub stamped 8-249 which is our part number # 84556UC3 the correct wheel stud replacements are part # 7-122.
view full answer... - 3,500 lb Trailer Axle Recommendation with 5 on 5 inch Bolt PatternBased on the dimensions you listed the # 35545E-ST-89 would fit your trailer since it is overall the correct length and has the correct length between the spring seats. The hubs of this axle have a 5 on 4-1/2 inch bolt pattern so you would need to verify that you have the same bolt pattern on your current wheels. I attached a help article that details how to determine bolt pattern. It sounds like you have a 5 on 5 inch bolt pattern though so you would need to go a different route. You...
view full answer... - Does 84556UC3 Come with 1 or 2 Hub and Drum Assemblies?The Dexter Trailer Hub and Drum Assembly # 84556UC3 is a single Hub and Drum assembly. We do not offer them sold in pairs, so you would need to purchase 2 individually if you're going to replace the parts on an entire axle. I've linked the installation video for this product to this answer. You could also go with the # AKHD-550-35-K , which is a more economical Hub and Drum assembly. If you also need a brake recommendation for your trailer, the # AKEBRK-35L and # AKEBRK-35R is a great...
view full answer... - Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern Hub Group 8-250The 8-250 hub and drum assemblies are unique in that they feature that 6 on 5-1/2 bolt pattern normally seen on higher capacity hubs. For a replacement you can use # 84656UC3. The bearings, races, and seal are included. You will also get a grease cap and new lug nuts with it. If your trailer has EZ lube axles with the grease fittings at the ends then you would need # 84656UC3-EZ instead. I have linked a couple of videos on these assemblies for you to check out.
view full answer... - etrailer and Dexter 5x5 10" Drum and Hub Assembly Stud Thread SizeBoth the Trailer Hub and Drum Assembly # AKHD-550-35-K and the Dexter Trailer Hub and Drum Assembly # 84556UC3 use 1/2" - 20 threads for the studs. Both kits include the appropriate lug nuts for the studs. Attached are review and installation videos that you can check out.
view full answer... - Compatible Brake Assembly for Dexter 8-249 10 x 2-1/4 Inch Brake Drum The Dexter 8-249 hub/drum is used on a 3500 lb axle, and would be compatible with a 10 x 2-1/4 inch brake assembly. I'd recommend self-adjusting brake assemblies like part # AKEBRK-35-SA. After an initial adjustment, your brakes will self-adjust so you'll always have optimal braking performance. The brake assemblies include the mud and crud plugs to cover the adjuster holes, but the mounting hardware is sold separately as part # BRKH10B. I'd also recommend carefully inspecting the armature...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Installed by:
Patrick B
Installed by:
Kevin C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James W.
5/26/2022
The final result worked quite well. After learning the cause of the self-adjusting brakes overtightening from a different source but the etrailer staff should have recognized the issue I loaded my 2500 pound sports car on my trailer for a round trip of about 1500 miles and was very satisfied with the brake performance.