bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Visible Cross Tube
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Item # e98843
Retail:$303.03
Our Price: $206.93
You Save: $96.10
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 44 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Great Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98843 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (769)
  • Q & A (0)
  • Photos
  • Used (1)

etrailer Trailer Hitch - e98843

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Visible Cross Tube
  • etrailer
  • 750 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
    • Maximum tongue weight: 750 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98843 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98843 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98843

Average Customer Rating:  4.8 out of 5 stars   (769 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by:
2016 Kia Sorento

Great hitch...but one suggestion. Put holes in the bottom of the tube by the receiver. There no way for all the water to drain out. The only reason I had to buy another hitch is because of saltwater sitting in the tube over the last few years. It all rusted out so bad that I could no longer use it...
I am either going to plug the four holes or drill holes in the bottom.
Thank you



by:

Product is good but shipping poorly packed. It came with both sides of the packaging broken open and the hitch hanging out. Scratched up down to bare metal. Also the decals the put on for the hitch rating fell off in shipping

Etrailer Expert

Katrina B.

5/11/2023

Yikes! You will definitely need to cover up the scratches with a rust-oleum type of paint. I have a link below for your reference.



by:

Install was fairly easy and been holding up great hauling a dirt bike around to the tracks!



by:

The quality of the hitch is excellent, 5 stars. We ran into a slight issue with our 2019 Kia Sorrento LX in Minnesota, where the drivers side M10 bolt hole is rusted and we’re unable to get that particular bolt to thread in. We will re-thread the hole and it’ll be fine, just one of this unforeseen problems you run into when doing your own maintenance on a vehicle. The hitch though, is great so far. Perfect fit for the vehicle. If I had one complaint I’d say I wish the bolts were physically labeled better or being able to figure out the difference between 1/2” and 7/16”, I mean logic told me that 1/2 is bigger, but some people might not know the difference!



by:

The trailer hitch is outstanding except for one problem. When you mount everything...you cannot access the bolt to lower the spare tire. You have to use a wrench because the hitch is in the way.

Edmund

12/3/2022

The product is great other than always having a 11mm wrench on hand to get the spare wheel off because the hitch is in the way of the rotating thing to lower than wheel.



by:

2nd hitch I've bought from etrailer and I will keep coming back. Hitch came in on time and in great shape no shipping damage at all.



by:

As an installer, we haven’t had any issues over the years with the hitches provided etrailer



by:
2016 Kia Sorento

Very easy install with clear instructions, seems well made, happy with my purchase



by:

box has been penatrated by hitch multiple places, and where ever box is penatrated, hitches powdwer coating is chipped off!
VERY POOR QUALITY PACKAGING!!!
I am not a powder coater to fix! to just paint to repeir will look like CRAP on this $40k car!!



by:

Use it all the time. I was rear ended a few months ago and the hitch saved my car from serious damage. It also passed inspection after the collision and is still holding strong!



by:

Easy install. Great product. I use this hitch with a Kuat bike rack and it's solid. I would buy it again! I had very little help installing with 2 friends. The most challenging part was aligning bolts with the frame but this was expected and we completed the task within an hour.

Allison

8/17/2023

Still great. Solid.



by:
2017 Kia Sorento

This is the second hitch that I have ordered from etrailer. I giving it a 5 star because it did fit. When I opened the box there were places that were wore down to the bare metal. I had some flat black spray that i used to cover the metal. I think it could packaged better. It should have in great big letters that all "BOLTS ARE NOTE SAME". I failed to see that the bolts were different dia. going through the frame. I got one stuck and cost me a lot of time. This is my fault! I couldn't get the rubber muffler hanger off the right side. After I removed the wheel it was easy. Steering is easier to turn, you can tell the weight has changed on the car. I might try to find some small rubber spring bumpers for the rear coils. Just like to feel the front wheels with more contact to the road. My last hitch looked good til I sold my car and hope this one is the same.

Etrailer Expert

Victoria B.

11/5/2019

When your trailer hitch has paint that has flaked off, covering the bare spots with spray paint is a great idea and what we recommend. Ive attached an installation video of this hitch on a 2018 Sorento. Around the 5:55 mark our installer calls out to use the smaller size carriage bolts on the passenger side. Your tip of taking the tire off to get better access to the muffler hanger is also a great suggestion. Finally, I checked our fit guide and unfortunately we do not currently have any suspension enhancement designed to fit your 2017 Kia Sorento.



by:
2020 Hyundai Santa Fe

Product look decent. Packaging and shipping needs major improvement to prevent scratches and chips of coating. It might have better protected the side of the hitch receiver if it was wrapped or secured to the box like the middle part.

Etrailer Expert

Katrina B.

8/23/2022

Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.



by:

Really happy with the quality of the hitch. Installation wasn’t as bad as I thought it was going to be everything lined up great. I highly recommend watching the etrailer installation videos before installing the hitch and wire harness. Great products and arrived earlier than expected. If I need another hitch in the future it will come from etrailer.



by:

received the hitch and custom wiring harness. everything fit perfectly, instructions and videos were on the money. This is my third purchase from etrailer.com Their prices and products are the BEST. keep up the Great job!!!!!

Stuart

5/25/2020

Hitch has worked with out any issues. Purchased a new travel trailer using a WDS. Also purchased Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional. Installed it and works great. If your tired of looking on line for towing accessories just go to etrailer. They haven’t let me down.



by:

Installed myself in about an hour. With the help of my floor jack it was very easy. Would have been easier with two people. Watched videos on installation. Very straight forward. Going to carry a luggage rack for musical equipment ( mic stands, music stands, sign rack ect.). Wish I took pictures of installation.

Anthony

7/18/2020

Working great! Also using with a bike rack and occasional rental trailers



by:

I’m completely satisfied with my hitch receiver. It fits perfectly as described and it looks great!!!

Sergio

8/24/2023

I am truly happy I bought this hitch receiver for my SUV, just unhook my trailer from my vehicle. Now o can use my SUV to pull my trailer when my pick up isn’t available. Thanks e trailer for a great product!!!



by:

This hitch is exactly what I needed for my E-Bikes. It was easy to install and looks great. I researched hitch receivers online and this was the best rated, and for good reason.

Robert

5/16/2023

Great! Super good hitch that carries two E-bikes. Bikes are easy to load, stable during driving and easy off.



by:

Hitch fit perfectly and associated installation video gave me the confidence to do the install myself.



by:

The hitch is very solid, and goes on quickly and easily. How easy depends on the tools you have at your disposal. I had a lift and other equipment to hold the hitch in place while securing it. Most of the time was spent just reattaching plastic nuts on the bottom of the KIA. You have to lower the spare tire on the KIA, as well as remove the plastic box on the left side, this allows you room to thread the side bolts and tighten them. I bought this hitch so I could use bike racks with a 2" receiver for maximum strength. I'm very happy with it.



by:

Great product. I am fairly handy but anyone that can use a wrench and follow instructions can install this hitch. Looks great and works as advertised!



by:

Both the hitch and the wireing kit wher easy to install and work great . The first wireing kit was not the right one for my car but I sent it back with no problem and with instruction's the right one instaled just fine .



by:

had one hole a little off, front right rear, hard to tell if from hitch or frame of vehicle. had all bolts loose and was able to get all in and torqued.



by:

Have had the hitch for a year and use it regularly to tow my fishing boat (and several U-Haul trailers). Easy install from good instructions and it looks as good now was when first installed. The paint is not showing any wear.



by:
2020 Hyundai Santa Fe

I bought this for my 2020 Hyundai Santa Fe (base model) to tow a light flatbed trailer and also to attach my bike rack to (see photo). This was an easy install. I recommend watching the video that etrailer has posted, and to get the tools recommended - especially the strap to hold the muffler up and the pry bar to get the muffler rubber mounts off. You'll also definitely need someone to help you because it's pretty heavy and cumbersome to to slide into place. I can tell the hitch receiver was built with quality materials and craftmanship. You'll need longer zip ties if you end up purchasing a wiring harness in order to strap down the long cables. Definitely worth buying.


25
769
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • What Kind Of Installation Time Will It Take For a Etrailer Receiver Hitch On a 2018 Kia Sorento?
    Hitch installation times can vary based on the experience level of the installer and the hitch being installed. On a receiver like the etrailer Trailer Hitch Receiver # e98843 we list the installation times for a professional at 45 minutes while a novice(DIY) installer would take around 90 minutes.
    view full answer...
  • Hitch Recommendation for 2019 Hyundai Santa Fe
    For your 2019 Hyundai Santa Fe the three hitches you mentioned are very similar in design between the Draw Tite part # 75908, the Curt # C13195, and the etrailer # e98843. They all would install all the same without any being more difficult than the other. The etrailer and Curt are actually made at the same factory so they are essentially the same but the etrailer has a matte finish instead of glossy that we've found is the most durable. So since it has the highest towing capacity too...
    view full answer...
  • Does Curt Wiring Harness 56256 Fit 2019 Kia Sorento Without Factory Tow Package
    Yes it will! The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56256 is a fit for your 2019 Kia Sorento that does not have the factory tow package. That said, I do highly recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118583 instead because we have found these to be the most reliable wiring harnesses. I have added links to video installs of both wiring harnesses for you to check out. Additionally, if you need...
    view full answer...
  • Recommended Hitch and Wiring for a 2016 Kia Sorento
    From what I could find, it looks like your 2016 Kia Sedona has a towing capacity of up to 3,500 pounds and a tongue weight of up to 350 pounds. I did find some variation with that, so you will need to look at the inside door jamb on the driver side of the vehicle. This will have all the capacities listed that are specific to how yours was set up. That being said, I suggest going with the etrailer.com custom fit Class III hitch # e98843. This will technically be rated higher than the vehicle...
    view full answer...
  • Recommended Equipment to Tow a Trailer with a 2020 Hyundai Santa Fe
    The basics to tow a trailer include a trailer hitch, wiring for the trailer lights, and a ball mount kit (ball mount, hitch ball, and hitch pin & clip). For your 2020 Hyundai Santa Fe I recommend using the etrailer Trailer Hitch Receiver # e98843 because it has a matte black finish that matches the accents of your vehicle and helps to hide dents and scratches from road debris better than glossy black finishes do. The wiring kit I recommend is the Curt T-Connector # CU94FR because it...
    view full answer...
    Image 1 for
  • Correct Trailer Wiring Harness for a 2019 Hyundai Santa Fe Without Tow Package
    The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # CU94FR is correct for a 2019 Hyundai Santa Fe even without the factory tow package. I understand this is confusing, but you will have the tow package port that the above harness plugs into no matter if the vehicle was or was not equipped with the factory tow package. I confirmed this with the manufacturer for you. The 2019+ models all have the singular tow package port. I understand the title can be confusing because...
    view full answer...
  • Recommended Trailer Hitch Receiver, Adapter, and Motorcycle Carrier for 2019 Kia Sorento
    The Malone 2" Dual Purpose Hitch Receiver # MPG544 will give you 7-1/2 inches from hitch pin to hitch pin. Using an adapter will reduce the tongue weight of your hitch by 50% however, so you will need a hitch that is rated to handle that loss. I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98843 which is rated for up to 750 lbs tongue weight. Then I recommend using the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 77-3/4"...
    view full answer...
  • Trailer Hitch and Towing Accessory Fits for 2017 Kia Sorento EX
    The etrailer brand # e98843 Class III hitch you're inquiring about is compatible with all models of the 2017 Kia Sorento, including the EX trim level. It'll fit great and will work very well for you. If you'll be towing with the hitch, you'll also need a trailer wiring harness, a ball mount and the properly sized trailer ball. For the harness, I'd recommend # C56332 if your Sorento has the tow package or # 118583 if it does not have the tow package. For a ball mount, use # 2753, part #...
    view full answer...
  • Trailer Hitch Recommendation for Carrying Bike Rack on 2019 Kia Sorento
    Due to the fact that it's American made, reasonably priced and has a very durable powder coated finish, I typically recommend the etrailer.com Brand Class III Receiver Hitch, part # e98843. I've linked you to the installation instructions as well as to an installation video that you might find helpful. The Draw-Tite # 75908 you'd looked at is more expensive, but has a lower capacity so you really wouldn't get any benefit from going that route.
    view full answer...
  • Will Saris Bones Trunk Mount Bike Rack Fit a 2019 Hyundai Santa Fe
    Great question! The Saris Bones 2 Bike Rack # SA805BL has been confirmed by Saris to fit your 2019 Hyundai Santa Fe. The only note they have about the installation though is to make sure the lower feet are placed into the license plate well as opposed to on your bumper. With that being said, trunk mount bike racks can damage spoilers if they are loaded to their max and/or used a lot. Since these types of racks are also touching the paint on the body of your vehicle I tend to lean towards...
    view full answer...
  • Best Trailer Hitch for a 2020 Kia Sorento
    The best trailer hitch for a 2020 Kia Sorento is the etrailer Trailer Hitch Receiver part # e98843 because unlike the other options for this vehicle it has a dull finish which we have found to not stand out nearly as much as the other glossier options. I know this may not seem like much but it really helps retains a factory like appearance as the shiny finishes tend to draw your eyes in which makes you see the trailer hitch first when looking at the rear of the vehicle. The etrailer Trailer...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for a 2018 Kia Sorento
    The trailer hitch I recommend for a 2018 Kia Sorento (All Models) is the etrailer Trailer Hitch Receiver part # e98843 which is a direct bolt-on fit which has a 5,000 lbs weight capacity. I really like the etrailer hitch over the Curt and Draw-Tite options because it has a matte finish which will do a better job of hiding nicks and it blends in with the vehicle much better which you can see below. Then for a trailer wiring harness, the best option is the T-One Vehicle Wiring Harness with...
    view full answer...
    Image 1 for
  • Parts Needed to Tow a Trailer with a 2019 Hyundai Santa Fe
    In order to tow a trailer with a 2019 Hyundai Santa Fe you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part # e98843 which offers a direct bolt-on fit. It has a 2" opening with class III rating so it will be great for towing or hitch mounted accessories like a bike rack or cargo carrier. In order to complete your towing setup you'll also need a 7-way trailer wiring harness and for this I recommend the Tekonsha # TK44ZR.
    view full answer...
  • Adding a 7-way Connector to a 2020 Kia Sorento while keeping a 4-way for Multiple Trailers
    I recommend using a 4-way harness part # C56332 to then add a 7-way and 4-way converter part # ETBC7. Once you have the 4-way harness hooked up, then you can convert it to a 7-way and 4-way. This is a straightforward install and I have attached a couple of install videos to help walk you through the process of getting everything installed. If you also need a hitch, I recommend part # e98843. This hitch is a straightforward install and looks nice on the back of your Sorento.
    view full answer...
  • Best Class III Trailer Hitch for 2019 Kia Sorento LX with V6 Engine
    For your 2019 Kia Sorento LX with the V6 engine, I recommend the etrailer.com Trailer Hitch Receiver # e98843 because it offers a 5,000 lb towing capacity and a tongue weight rating of 750 lbs. The matte black finish on the etrailer hitch is a nice touch that sets it apart from its competitors. Since you'll just be using the hitch to move your daughter to college, it won't play a huge part for now, however, the higher tongue weight capacity will allow you to use the hitch for a wide variety...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2021 Kia Sorento
    I have another option for you, but the etrailer Trailer Hitch Receiver # e98843 for a 2020 Kia Sorrento will not fit your 2021 Kia Sorento as they use different mounting locations due to differences in the frame. For your 2021 Kia Sorento I recommend the Curt Trailer Hitch Receiver # C34ER which has a 600lb tongue weight rating and 4000lb trailer weight rating making it a great option for towing a trailer, carrying a bike rack, or carrying a cargo carrier. If you are planning on towing...
    view full answer...
  • Trailer Hitch and Trailer Wiring Harness Recommendation of 2018 Kia Sorento
    I'd recommend the etrailer brand Class III hitch, part # e98843, as it's high quality yet affordably priced. The only possible disadvantage I'd give this particular hitch is that the crossbar is visible from the rear. Some trailer hitches are pretty nicely concealed behind the vehicle bumper, but this isn't one of them. If you are't fond of the appearance of the majority of the hitch being visible from the rear, then the EcoHitch # 306-X7320 would be recommended as the entire hitch assembly...
    view full answer...
  • Trailer Wiring Harness For 2018 Kia Sorento
    The correct 4-way wiring harness for your 2018 Kia Sorento will depend on if you have the factory tow package or not: - WITH Tow Package: T-Connector Vehicle Wiring Harness # C56332 - WITHOUT Tow Package: T-Connector Vehicle Wiring Harness # C56256 If you aren't sure if you have the tow package or not you'll have to look for a plug under the vehicle on the driver's side by the tire (you may need to remove panels in order to see). If you have the plug the tow package wiring is there....
    view full answer...
  • Hitch, Wiring And Brake Controller For 2019 Kia Sorento 3.3L V6 AWD
    Your towing package will need to include a hitch, wiring harness, ball mount and hitch ball to get you ready to tow. One important point is to check the vehicle capacity to make sure your Sorento's limits are not exceeded by the tow duty you're assigning it. Also know that your tow setup is limited by it's lowest rated component so all these parts need to be within their respective limits for safe use. For the hitch, I recommend the etrailer.com Trailer Hitch Receiver # e98843. This...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver For 2020 Hyundai Santa Fe
    Thank you for the kind words! We stand behind the products we offer and will always go above and beyond to fix an issue should one arise like a nut or bolt being incorrect or missing. While this is not a common thing, mistakes do happen. I was unable to find the review you referenced about the passenger side bolt near the heat shield being a problem, but since the mounting brackets are made of mild steel there is a possibility that they flex during shipping and if it is not corrected...
    view full answer...
  • How Long Does the etrailer Trailer Hitch Take to Install On A 2016 Kia Sorento?
    For a professional, the etrailer Trailer Hitch Receiver # e98843 would take 45 minutes. For a beginner, you could expect this to take around 90 minutes.
    view full answer...
  • Recommended Hitch and 7-Way Wiring Harness for a 2020 Kia Sorento w/out the Towing Package
    The Curt Trailer Hitch item # C13195 will work with your 2020 Kia Sorento but the wiring harness item # TK24FR will not because you do not have the towing package. Yours has different connectors than the Sorento's with the towing package. To install a 7-Way harness on your 2020 Kia Sorento without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness...
    view full answer...
  • Can etrailer Cargo Carrier e98874 be Used with 2020 Hyundai Santa Fe
    Hey Nicole, so the etrailer cargo carrier part # e98874 that you referenced can definitely work for your 2020 Hyundai Santa Fe but you will need to have a 2 inch hitch installed on the vehicle. For that we have the 2 inch etrailer hitch part # e98843 that fits your Santa Fe and would work great with the carrier.
    view full answer...
  • Recommended Trailer Hitch For A 2020 Hyundai Santa Fe SEL
    When it comes to installing a trailer hitch on your 2020 Hyundai Santa Fe SEL The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98843 is confirmed to fit your vehicle. The trailer hitch has a bolt-on installation with no welding required. It has a matte black finish over a protective base coat that offers superior rust resistance. The hitch has a maximum gross trailer weight of 5,000 pounds and has a maximum tongue weight of 750 pounds. I would...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Used Items Available
Used Picture for etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $187.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Ryan G
Test Fit:
Ryan G
Employee Adam E
Test Fit:
Adam E
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.