Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(441 reviews)
Price: $136.62
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Retail:$279.50
Our Price: $136.62
You Save: $142.88
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (441)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 400 lbs TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Not rated for use with weight-distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75784 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87642 Hidden Hitch Class 3 Trailer Hitch Receiver
Item # 75784
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Acura RDX
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75784
Average Customer Rating: 4.9 out of 5 stars (441 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Keyvan P05/07/2017
Solid hitch. It is well built and easy to handle. Only issue I had was the packaging. First of all, this shipment did not come from etrailer guys directly. When I placed my order, their awesome customer service contacted me within 20 minutes letting me know that they are out of stock and the next batch of hitches are delayed by the vendor. I was offered to switch to Curt hitch. They are great too but I did not go with that option. 1) They are more expensive (maybe 15 bucks more) 2) They require a safety strap with bike racks and I do not want to hook anything to my car. The curt however has higher tongue weight. I am not planning on towing anything (well for now). My sole reason for this hitch is hooking up my bike rack. I have a Kuat Transfer 2 and it is a great rack
The hitch was wrapped in a paper to protect it from getting scrathsed. However there were no bubble wraps anything like that. The hitch was sticking out of the shipping package. It was scratched in multiple places. No big deal. I mean it would be nice to get a scratch free one, but realize this that the hitch will be underneath the car and it will get hit by rocks and so on. My only issue is that I live in Minnesota and winters require tons of salting, so we get rust a lot.
My fix to address this issue was to purchase a can of Rustleuom primer and paint. I double coated all of the scratches and it was dried to touch in 2 hours and fully cured in 24.
So now let's get to the installation. This was super easy. Do not pay someone to do it. Have someone help you. It makes it super easy. We had the hitch installed in 5 minutes. No lift of jacking required. I was also thinking of getting car ramps but it slides in pretty easy. With two people you can lie down and slip into position and then screw the bolts. I think with one person you can lift it up and put in on a box or pile of boards and then screw each side. I'd suggest taking care of the handled nuts first. Bend and shape them and then place them in the holes. With this once you are underneath, you can screw the bolts to the welded nuts and then move to the last two bolts, then you dont have to get up and fix the handled ones while the hitch is dangling.
Just beware, then welded nuts need to be clean or otherwise it would not screw that well. As mentioned, I live in Minnesota. It took us 30 to 40 minutes of spraying WD-40 and brushing the holes. It was painful. There was so much rust you cant even believe it. We could not screw past 1 turn. So the hitch itself is easy. Other things might cause complications.
I rented a torque wrench from Autozone and it turned out to be out of spec. So we drove there and got another one. Just FYI, 115lbs of torque is tons pressure. You need to put a lot of muscle into it to get it to that point. Do not feel like you are over-tightening it. It will click at one point. We felt like that we are not doing it right. I found a Discount Tire right by the Autozone store and the staff there torqued to spec for us free of charge. The technician was amazed on how much 115lbs torque was. He kept turning and twisting and not hearing a click. It was kind of funny but we got it done. It looks great and sturdy
by: John E. 05/05/2017
2016 Acura RDX
We ordered this hitch to install on our New 2016 Acura RDX so that we can haul our road bikes when traveling. The dealership wanted an incredible amount to install the Acura hitch. The product is excellent and fits perfectly to the predrilled wholes in the frame of the Acura. My wife helped me hold up one end while I held the other and place the bolts and tightened them. It took less than 30 minutes and saved me $500 that the dealership would have charged on top of the what I paid etrailer.com. I did not install the wiring harness as I don't expect to pull trailers with this vehicle. The Draw-Tite hitch is also a heavier duty hitch compared to the hitch from the Acura dealership. I was also very happy with the service from etrailer.com. We have had the hitch on the car for about 1.5 years and it still looks good and no rust.
John E.
5/7/2018
The hitch has done well. We only use it for bikes. I probably should get the wire harness sometime in case we pull a small trailer. Thanks
by: Michael 04/25/2023
Easy instructions and install. Great Product, well made and well packaged for shipment.
Michael
4/26/2024
Still has been working great. Absolutely no issues.
by: Fred11/30/2020
Hitch arrived very quickly. It was well secured in a sturdy box with all of the needed parts included. The instructions were easy to follow and I was able to install the hitch with my son in about 30 minutes. We were able to install without any type of lift.
Besides the etrailer video on the hitch I would suggest you also watch the draw tite Utube installation video as it shows a couple of extra hints that came in very helpful. One thing to be sure to do is pop the two plastic fasters that hold the back rear shroud to its support...it makes installation so much easier. All in all the product looks like it is very well built, is easy to install and looks great! I would easily recommend.
Fred B.
12/1/2021
I still love my trailer hitch after a year. I use it primarily with my multi bike rack but have also used it for pulling a small trailer. I couldnt be more pleased with its performance. Thanks!
by: David279608/24/2019
2014 Acura RDX
I bought this hitch to haul two bikes on my 2014 Acura RDX via a hitch rack. The hitch seems extremely well built and designed. However, my installation took a bit longer than most folks - probably 50 minutes or so. My riding buddy got the passenger side installed fairly quickly, but then we couldn’t quite get the driver side bolts in. It seemed like the bumper bracket interfered a bit. But we finally got it installed and it looks great with the cover installed.
David2796
8/25/2020
Outstanding hitch rack - well-built and simple usage!
by: Jiratt P.06/15/2014
2014 Acura RDX
ACURA RDX 2014 AWD
I love this website. They answered all my questions with all the details. Hitch it's really high quality and perfectly fit with the car. Set up pretty straight forward nothing complicated. It took me and my 14 year old daugther about 45 minutes to install it. Looks great on the car. It's doesn't look too extractive and work great with THULE rack.
Jiratt P.
6/16/2015
Still no issue. I used a lot last summer to carry four bike. Perfectly fine.
by: K C06/22/2020
I purchased the hitch primarily to use with a bicycle rack. The box in which it was delivered was a little messed up but the hitch was perfectly fine. I was able to install the hitch myself without having to put my car in a lift. It was a little awkward as there wasn’t too much room to maneuver. The video provided by etrailer made the install extremely straight forward and took about 45 min. The hitch feels very solid and looks pretty nice.
K C.
6/23/2021
So after a year I’m still very happy with my purchase. It was a good buy. etrailer is great, definitely recommend them.
by: Rosalie03/11/2024
Love being able to tow a trailer with my Acura. Easy install and we've had no issues with this hitch. Great quality for the price.
by: Raymond09/21/2021
2017 Acura RDX
After getting a quote from Acura for more than $[XXX] to install a trailer hitch onto my 2017 RDX, I saw what eTrailer had to offer. $[XXX] with free shipping for a custom-fit hitch for my exact vehicle. In addition, they had an excellent video selection guide to help me to choose from the two hitches they offer PLUS an installation video of them installing it on my exact vehicle. I purchased this with 100% confidence that it would fit my car and install beautifully. Package arrived in 3 days with extremely detailed tracking. I installed the hitch without a "hitch". Perfect experience from start to finish.
by: John B.07/11/2017
2013 Acura RDX
Ok... thought you might like to hear from a auto repair shop. I chose this specific hitch and the supplier because of the reviews. The RDX is a new vehicle to the shop owners wife and we wanted the best we could find for her. We often use presumed simple jobs to help train our apprentices. This D.T. was no exception. I came out into the shop to check on his progress and it was installed! I mean in just a few minutes. Yes we had it up on a hoist, but the real insight was asking the techs, "how did it go?" Techs responded with the usual, just a few words... "slammed it" and "done". Folks... that means you can do it too at home. It looks great and the bosses wife is happy! Pictured are Master Technician Lance and Apprentice Technician Eric. Our recommendation to you is this... great product, great supplier, order it!
John B.
7/17/2018
The hitch is working great and the RDX is doing things never before possible since we purchased the Draw Tite hitch from you. Thanks again.
by: Carol07/17/2021
I wanted this for an E bike rack. My independent auto repair shop told me to get this one and they installed for me. Total cost was $[xxx] compared to $[xxx] from Acura dealer. It was easy for them to install.
Carol
7/18/2022
great
by: Gordon05/30/2022
Acura RDX
Great Hitch receiver, fit perfectly on my Acura RDX. Easily installed by local RV center. Saved a bundle over there price. I use it mainly for my E-bike rack. Perfect!
Gordon G.
6/2/2023
I use the hitch receiver on a weekly basis. Never a problem. This is a great product and great service from eTrailer
by: Robert11/14/2020
2017 Acura RDX
Excellent, Excellent, Excellent! Hitch arrived on date promised and was a synch to install. Install video was helpful! Fits perfect on our 2017 RDX. Highly recommend Etrailer!
Robert
11/15/2021
Great! No issues
by: Thomas03/22/2023
Fits as advertised. Installation took 15min max.
by: Mike D08/12/2017
15-20 minute install - I set the hitch up a small jack and jacked it into place and inserted the four bolts and tightened. Everything fit perfectly. Order process, delivery and communication was top notch.
Mike D.
8/13/2018
One year out and everything is still performing flawlessly. Couldn be happier with the product.
by: Osvaldo 04/22/2024
Acura
Love the hitch. I did have to buy a tap to thread the M12 1.25 on the Acura because the metal was oxidized. All went well. Great product.
by: Ignacio12/05/2021
Shipped fast and installed in my driveway in 30 minutes taking my sweet time to make sure I did everything right. So far so good thanks!
by: Peter 04/13/2024
Went on easy no issues since.
by: Mark08/16/2019
Hitch installed on my 2011 Acura RDX as the video explained. Love your videos! Due to my car being 8 years old, I had to use a tap to clean out the rusty frame threads before installing the two rear hitch bolts. The bumper brackets were a bit in the way, but after a small amount of bending outward the hitch cleared them. After cleaning out the treads and bending the bumper brackets, hitch installation was a breeze. Great products and great prices. Thanks etrailer!
by: Grady J06/13/2013
2013 Acura RDX
The Hidden Hitch arrived undamaged. It is well made, sturdy, with a nice finish. Installation took me about an hour on my 2013 RDX. I ended up removing the plastic pins that hold the fascia to the two brackets. It was the only way I could line up the holes. After I did the installation, I watched the Draw-Tite video, which is longer and more detailed than the Hidden video, and includes instructions to remove the pins before installation, and shows how the bend the brackets after installation. I wish I would have watched the Draw-Tite video before I did the installation, it would have saved time. Also raising the vehicle would have made the installation easier. But I am very pleased with etrailer.com and the final install.
by: fairly handy05/20/2017
Pretty straight forward installing the hitch.
Didn't have to lift up the car.
Only problem I had was holding up the hitch while placing the bolts.
The hitch is pretty heavy and need an extra strong person to hold it up.
I did not have another person helping me but fortunately, I had some lifts to hold up the hitch.
Once I figured out how to hold the hitch up, it took about 20 minutes to finish.
Minor note.....the black welded bolts were difficult to get into the holes.
Took about 5 minutes each.
Might have been because I was lying down on the ground.
Also, it comes with two hex nuts.
These are meant for the welded bolts but I think they are just extra (since the welded bolts go straight into the vehicle).
All in all, great value and excellent service.
Received the hitch within a week on free shipping.
by: William06/06/2023
2016 Acura RDX
The hitch is well made, what I did not like was the damaged E-coat. the hitch has been dropped a couple of times chipping off the E-coat. May not sound like a big deal but where do think it is going to start rusting? They spend all this money putting on a special coating and then don't protect it prior to shipping. Poor quality control! I had to paint it where the coating was chipped off.
Jenny N.
6/8/2023
When the hitches are shipped to us they are shipped in large pallets all together and this can cause chips or scratches to the powder coating. You already have done what we would suggested by painting those areas.
Helpful Links
by: Ken RDX 201710/04/2017
Ford Edge
Product arrived on time and looks to be very study. As with other reviews the packaging was significantly torn by the loose trailer hitch that was only secured at one end inside the large cardboard box. This allowed the hitch to slide back and forth within the box. The hitch should be attached to the box at both ends. Fortunately, only the bottom back edge of the hitch had the paint scraped off. This is the part that tore the side of the box open for about 1.5 feet. No other damage. It bolted right into place within 25 minutes using a six-pack cooler as a second pair of hands to hold it up while inserting the bolts. My planned use for the hitch is for a bike rack and maybe a platform carrier. I would recommend the hitch but packaging leaves a lot to be desired.
by: Kyle05/06/2018
2015 Acura RDX
Hitch installed with exact fit, see photo "hitch.jpg". Instructions said the car's rear facia would slightly tuck over the top, but this tuck is so small you can't see it in regular viewing. I wanted the hitch to carry my really great rear mount bike rack. See photo "Bike Rack.jpg" Mission Accomplished! The mouth of the receiver is set back from the face of the car's bumper by about an inch. I have mixed feelings about this. On one hand, the hitch is out-of-the way so you won't bruise your shins on it when its not being used. On the other hand, it is harder to reach the pin hole, and the load might end up very close to the car. With my bike rack, it was a close question, but it did clear the tailgate by a tiny margin, so probably no extension is needed. An extra inch of length on the receiver would be nice.
by: Martin L.08/05/2016
2012 Acura RDX
I am very happy with these products (hitch & rack), as well as the follow up and support received from etrailer.
I installed the hitch in an hour and a half by myself. I lost a half hour because I didn't clean the existing wedge nuts immediately. (Though the instructions were clear, CLEAN THEM on older cars.) Rust and crud didn't allow the bolt to easily screw in.
The instructions and associated video made the install simple. The product is very well made and very secure. The look on my 2012 RDX is clean on the car and you hardly notice the hitch is there. Highly recommend it!
The bike rack likewise is well made, simple to install and solid holding 2 bikes.
25
445
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Trailer Hitch and Wiring for a 2015 Acura RDXNo, the 2004 Acura MDX and 2015 Acura RDX require different trailer hitches. For the 2015 Acura RDX you can use Draw-tite trailer hitch # 75784. I have included a link to a video showing installation of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and storage bag. If the ball mount kit does not have the right rise or drop...
view full answer... - Will Installing Trailer Hitch With Higher Ratings Increase Towing Capacity Of 2017 Acura RDX?When trying to determine what the towing capacity of your 2017 Acura RDX is, keep in mind that you will be limited to the lowest rated component, and no products will increase the towing capacity of your vehicle past the manufacturers ratings. I checked the owner's manual for your vehicle and you are correct that you are limited to 1500lbs towing capacity, and 150lbs tongue weight. Even though the Draw-Tite Trailer Hitch Receiver # 75784 you were looking at has a 400lb tongue weight rating...
view full answer... - Stabilizer Strap Recommendation for Curt Hitch C13130 on a 2013 Acura RDXThe correct stabilizer strap to use with the Curt Hitch part # C13130 that you referenced is the part # 18050. To see how it would get used check out the review video I attached. Another option you have that might interest you is to use a Draw-Tite Hitch like part # 75784. It does not require the use of a stabilizer strap. I attached an install video for this hitch for you to check out as well. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman...
view full answer... - Draw-Tite # 75784 Hitch and Swagman XTC4 Bike Rack Compatibility on 2011 Acura RDXThe 2-inch Draw-Tite Hitch we offer for your 2011 Acura RDX is part # 75784 which has a rated tongue weight capacity of 400-lbs. You are correct that any extender/adapter used in this hitch will reduce its capacity by half. This means that your hitch-and-extender would have a tongue weight rating of only 200-lbs. Since the Swagman XTC4 4-Bike Carrier # S64665 itself weighs 59-lbs, your net load capacity for your bikes would be only 141-lbs. This 35-lbs-per-bike may be enough for your 4...
view full answer... - Recommended Trailer Hitch for 2018 Acura RDXFor your 2018 Acura RDX I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. It features a powder coated steel construction and its 4,000 pound towing weight capacity makes it the highest rated hitch available for your vehicle. Since it doesn't require the use of an additional stabilizing strap with non-trailer loads like the Curt alternative, this particular...
view full answer... - What Hitch Will Fit A 2011 Acura RDXThe Curt Class III 2 Inch Hitch, part # C13154, will fit a 2010 and 2011 Acura RDX, as well as a 2012 model. The Draw-Tite Class III 2 Inch Hitch, part # 75784, will also fit the 2010-2012 Acura RDX. I am including links to the installation instructions on all four of the hitches.
view full answer... - Why Does Trailer Hitch for 2016 Acura RDX Have Higher Towing Capacity than VehicleWith any towing setup your overall towing capacity is only as strong as your weakest component. So if you were to install a hitch on your 2016 Acura RDX that has a higher towing capacity than the vehicle like with the Draw Tite # 75784 you would be still limited by the vehicle since a towing setup is only as strong as it's weakest component. They design hitches for vehicles and then try to make them as strong as possible and rate them independently of the vehicle which is why they capacity...
view full answer... - Will the Saris Freedom Bike Rack Fit Draw-Tite Trailer Hitch on a 2014 Acura RDXYes. The Saris Freedom bike rack # SA4412B will fit Draw-Tite trailer hitch # 75784 for your 2014 Acura RDX. I have linked videos on the hitch and the bike rack for you.
view full answer... - Trailer Hitch Fit for 2011 Honda OdysseyThere is a trailer hitch that fits your 2011 Honda Odyssey but the Draw-Tite # 75784 you mentioned does not fit. Instead you will need the Draw-Tite Max-Frame Trailer Hitch # 75270 which absolutely does fit your '11 Odyssey and is constructed from welded steel so you were correct that it is extremely strong; so strong in fact that the hitch even comes with a lifetime warranty. I have added a link to a video install of this hitch on an '11 Odyssey for you as well as a link to the written...
view full answer... - Trailer Hitch Recommendations for 2016 Acura RDXBecause the support strap you speak of would loop over the spoiler, there is a possibility that the weight applied to the strap could break the spoiler. Curt makes a great hitch, but I can't recommend them for every application because some vehicles aren't suited to using the strap (especially vehicles like your RDX that have the spoiler atop the hatch lid). I'd recommend the Draw-Tite Class III hitch, part # 75784. Unlike the Curt hitch, Draw-Tite doesn't have a warranty stipulation...
view full answer... - Recommended 2-Inch Trailer Hitch for Transporting Bikes on 2013 Acura RDXYour 2013 Acura RDX can be fitted with two sizes/classes of trailer hitch, either a lighter-duty 1-1/4-inch Class II type like # C12083 or a higher-capacity 2-inch Class III type like # 75784. Some Curt brand hitches do have a warranty requirement of using their support strap # 18050 with loads like bike racks, but since the Draw-Tite # 75784 has no such requirement I recommend this 2-inch hitch. The written instructions and a video are linked to illustrate the installation process. Many...
view full answer... - Trailer Hitch and Thule 4-Bike Rack Recommendation for 2015 Acura RDXFirst let's start with a hitch for your 2015 Acura RDX. For that I recommend the Draw TIite part # 75784 as it is a 2 inch hitch size which means it has plenty of capacity for a bike rack and is also the size most 4 bike racks are made to fit. My 4-bike Thule rack to recommend is the Thule Apex Swing part # TH9027XT because it can carry up to 4 bikes and can swing out and away from the rear of the vehicle to give you complete access to the rear cargo area with bikes loaded. The arms of...
view full answer... - Is Spacer Block Needed When Installing Draw-Tite Hitch # 75784 on 2013 Acura RDX When installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 on your 2013 Acura RDX the included spacer block is indeed required. I have attached an image from the installation instructions that show the block being used (part 5 in the picture) on the Acura RDX starting with your 2013 model year. I have included the full PDF link for the installation manual below that you can also look through.
view full answer...
- Parts Needed For Hauling a TAB 320 Trailer With a 2016 Acura RDXFirst I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 for your 2016 Acura RDX. This class III receiver is rated for up to 400lbs of tongue weight and a towing capacity up to 4,000lbs. Be sure to verify maximum towing capacity with your Acura dealer. The receiver has a mounting tab for the 7-way connector so you will not need to drill holes in your fascia. The T-One Vehicle Wiring Harness # 118569 is needed to control the lighting for the trailer. This will connect directly...
view full answer... - Installing Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 on 2017 Acura RDXThe Draw-Tite Class III Max Frame Receiver Hitch # 75784 referenced in your question is confirmed to fit your 2017 Acura RDX. There is actually no fascia trimming or modification required for installation. On some models, it may be necessary to pull down a bit on the fascia to get additional clearance for the hitch crosstube, but this will not cause any distortion to the bumper. I have attached an image from the installation instructions to clarify this. Otherwise this is a custom fit...
view full answer...
- Recommended Hitch and 2 Bike Rack for 2010 Acura MDXBeginning with the hitch, I would recommend the Draw-Tite Class III Receiver, part # 75784. The installation of this particular hitch is a pretty simple process. You can look over the install instructions I have linked to in order to determine if it is something you would feel comfortable tackling yourself. Choosing a Class III over the Class II which uses the smaller receiver opening will provide you with more flexibility in choosing hitch mounted accessories such as the bike rack you...
view full answer... - What Vehicles Does Draw-Tite Hitch 24882 Fit, and What Hitch Fits 2013 Acura RDXI'm sorry to hear about your 2012 Chevy Cruze, but I can definitely let you know what vehicles your Draw-Tite Trailer Hitch Receiver # 24882 fits. This hitch is a fit for the following: - 2011-2015 Chevrolet Cruze - 2012 - 2017 Buick Verano (excluding Turbo models) For your 2013 Acura RDX, when you do get the chance to put on a hitch, I recommend going with the Curt Trailer Hitch Receiver # C13130 as it is a slightly easier installation than the Draw-Tite # 75784 and has a higher tongue...
view full answer... - Do I Still Need to Use the Stabilizer Straps on my Curt Hitch When Carrying a Bike RackStabilizer straps are no longer required when using a Curt hitch like the # C13130; this was an older requirement for some Curt hitches when using a bike rack only, but they have since determined that it is not required or recommended any longer. You could also use the Draw- Tite # 75784, which the main difference is that the receiver is about 1-1/2" shorter, so it's not as ideal for bike racks since the clearance from the vehicle will be minimal. I've linked an installation video of the...
view full answer... - Parts Needed to Tow Utility Trailer with 2010 Acura RDXWe have just what you need, but there is not a Class II hitch for your 2010 Acura RDX; instead there are Class III hitches with 2" receivers that are rated higher than a Class II, so they're well suited for your needs. I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75784 which installs without any drilling required and will have a little bit better ground clearance than the Curt # C13154 that is also a confirmed fit for your RDX. For the...
view full answer... - What Are the Torque Specs for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784In the attached installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 you can find the torque specs directly under step 4. Sometimes the manufacturers will slightly change some hardware to accommodate a wider range of vehicle so we always recommend checking with the current instructions (found on the link) just in case the torque setting has changed. I have attached a sample installation video for you to check out.
view full answer... - Recommended Hitch Set-Up for a 2018 Acura RDXThe Draw-Tite # 75784 will include all the hardware needed to get installed. This will require no drilling or trimming to get installed and will bolt directly to the frame of your 2018 Acura RDX. From here there will be a few parts needed depending on what you will be using the hitch for. If you will be towing, you will need a ball mount, ball, and pin/clip to hold them in place. Something like the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop # DT49MR will include...
view full answer... - Recommended Wiring Harness and Installation Instructions for 2013 Acura RDXThe Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569 as well as the other custom wiring harnesses we carry will all install in a similar manner. This custom-fit T-One connector plugs into your Acura RDX's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once you've plugged in the tow harness, locate the fuse box under your Acura RDX's hood and insert the provided 20-amp fuse as indicated in the instructions. The...
view full answer... - Bike Rack Recommendation for a 2013 Acura RDXGood news, this Kuat Transfer V2 # KU74FR will work for your 2013 Acura RDX. The hitch I recommend for you is the Drawtite Class III # 75784. This 2 inch hitch has a 400lb tongue weight, which will work good for your carbon bikes and the Kuat Transfer V2 # KU74FR. I have linked all the hitches for your vehicle for your convenience, there is a higher rated tongue weighted hitch from Curt # C13130. Curt highly recommends that you use a stabilizing strap # 18050 with any none trailer load,...
view full answer... - Trailer Hitch for 2016 Acura RDX for Use with Thule T2 Platform Rack and Pedego BikesAll three of the 2-inch hitches we offer for your 2016 Acura RDX, one of which is the Curt # C13130, will mount to the same points on your RDX. All will be in essentially the same position at the rear of the car, with the hitch pin hole about 3-1/2-inches from the rear edge of the bumper. Of the three hitch options I suggest the Draw-Tite # 75784 since it is the lowest-cost hitch and since it does not require you to use a stabilizing strap which is required for the Curt hitch. Your Thule...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Keyvan P.
5/7/2018
It is a great hitch and works well. I had to paint it when I received since there were some scratches on it. I live in MN and we get a lot of salt on road and rust is a major issue. Unfortunately I backed into a small stone step behind my garage which scrapped the side of the hitch. It actually held up well and crushed the stone. Only issue is the pain got scrapped off. It happened in November and it was too cold to paint it. Now it is a bit rusty, mostly superficial. I need to scrap the rust and repaint it