Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(143 reviews)
Price: $194.23
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75278
Our Price: $194.23
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (143)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75278
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
Fully welded Oldsmobile Silhouette trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75278 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87410 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1999 - 2005 Pontiac Montana
- 2005 - 2009 Pontiac Montana SV6 Extended Wheelbase
- 2005 - 2009 Pontiac Montana SV6 Regular Wheelbase
- 2005 - 2007 Saturn Relay
- 1997 - 2004 Oldsmobile Silhouette
- 2005 - 2007 Buick Terraza
- 1997 - 1999 Pontiac Trans Sport Van
- 2005 - 2009 Chevrolet Uplander
- 1997 - 2005 Chevrolet Venture
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Too difficult to install
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75278
Average Customer Rating: 4.7 out of 5 stars (143 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Ron02/21/2024
2008 Chevrolet Uplander
I've installed a lot of these on our vehicles mainly Dodge Caravans and the past and I have to say I really enjoy having this tow hitch it's better design better than the others. I want to mention your guys's prices are more reasonable than others. I appreciate it. Delivery was very fast.
by: Mark12/05/2023
Wiring connector caused a pin in factory harness to push partially out to cause an open in circuit to left turn signal.This led to customer return. trailer hitch mounting holes did not line up correctly. Was unable to install forward most mount bolt.
by: Jeff 09/06/2022
Chevrolet
The original shipping timeframe given was not terribly long, but then it was sent and came in half the time! Hitch receiver fits perfectly on our 2006 Chevy Uplander- drill (2) holes in the frame rails and everything goes together seamlessly. Probably a 30 minute install once you figure out the directions. The directions were not amazing, but they got the job done.
Jeff
9/6/2023
After using this hitch receiver for about a year, we are sold. It has been incredibly useful. We are obviously not hauling huge loads with a minivan but it has been nice to throw a rack on the back for more storage on trips. It doesn't rattle at all and hasn't shifted even slightly since installation. We would do this again in a heartbeat.
Mike L.
10/27/2023
@Jeff That's great to hear! We're glad your Draw-Tite # 75278 hitch is still doing a good job for you!
by: Joseph G04/04/2024
2008 Chevrolet Uplander
Great seller. Packages was shipped very quickly and the hitch came with everything needed and mounted very easily. Thanks for the great service.
by: Joyce05/26/2018
2005 Chevrolet Uplander
We received our hitch quickly. We were not expecting it to arrive so quickly. The hitch was exactly what we needed at a much lower cost than what the local dealers were quoting us. We had our dealership install the hitch for us and all went smoothly. The instructions were easy to understand. We also watched a video on how to install on our vehicle which also helped. Kudos to etrailer Corporation!
Joyce
5/26/2019
We bought the hitch and wiring kit. Being older we had our regular garage man install. No problem installing and it has been working great this whole year. I would definitely recommend this product and company for your needs.
by: Ramon, V08/30/2019
2003 Pontiac Montana
This is as good as it gets, watched the videos they had for my specific model 2003 Montana, did it by myself since I had no help, no problem. Perfect. They send you everything you need so you can't go wrong. A+++, extremely happy.
Ramon V.
8/31/2020
Working like a champ. No problem, live it.
by: c®zo03/19/2012
Looks great and easy to install (after a little man handleling).
etrailer.com is great to work with, shipping was fast and tracking information very accurate.
Phone support was very helpful!
Thank you.
by: Tom Dee08/03/2017
2005 Pontiac Montana SV6
Awesome hitch, receiver opening is pretty much the only thing noticeable once installed. Using basic homeowner type tools and lying on the ground on my back it took me about 2 hours to install, and that's including a few short breaks. Hardest part was drilling the required holes with a 3/8" drill, had to step up in drill size a few times. By the way, I'm 68 years young, and the temperature here in Florida was about 90 degrees when I installed it so needless to say I didn't move too fast.
by: Josef05/27/2018
2007 Chevrolet Uplander
The hitch was in good shape when it was delivered. Box had a hole in it and the parts bag was ripped open . Other than a couple things missing in the parts bag it was a relatively easy install
by: Dudley B06/01/2023
The Draw-Tite arrived in a timely manner and went into place as promised. It was an easy installation using the instructions and online video. I have not yet used it, but all seems good.
by: Tim 06/19/2023
Perfect fit and was a straight forward install. I was impressed with the hardware pack and detailed instructions.
by: Michael 04/21/2023
2003 Oldsmobile Silhouette
I've ordered many items online and several have never been delivered.
When I ordered this hitch from etrailers. com I was concerned this was gonna be another item 'lost in shipping' but I was excited when in just two days the package appeared at my door. Etrailers. com has made me a believer again. Thankyou
Thankyou Thankyou
by: Ryan03/09/2023
2008 Chevrolet Uplander
This hitch is not appropriate for a 2008 Chevy Uplander. I ordered it, dry fitted, and confirmed with Etrailer that it is the INCORRECT hitch. Also, not sure why this is rated as 3/10 ease of install vs the Curt 13336 as the Draw Tite requires drilling too 1/2" holes in the frame and the Curt does not. And yeah, yeah you can see customer comments that installed this hitch on an Uplander, but unless their Uplanders are different then mine, then those installations are wrong. Please remove this as an option for 2008 Chevy Uplanders....based on Uplander frame configurations, I doubt this works for ANY Uplander.
by: Zahir08/15/2020
Works very well strong and easy to inst all
Zahir
1/6/2022
Very well
by: Randy06/22/2016
2008 Pontiac Montana SV6
I recently purchased a hitch from etrailer and I am extremely happy with the product. The install was rather easy even by myself. I also purchased a wiring harness which was again a simple install. Now I'm ready to go fishing!
Thanks etrailer
Randy
6/22/2017
Fantastic. Not one problem at all and many fishing trips!
by: Gerry10/05/2022
2008 Chevrolet Uplander
The trailer hitch fit my 2008 Chevy Uplander perfectly.
The biggest job was cleaning and tapping the existing weld nuts on the vehicle frame. After many years of Wisconsin winters, the weld nuts were in bad condition. I thought the handle nuts that were supplied in the hardware package would be a trick to install. To my surprise, they installed quite easy. A very clever way to add a nut to the inside of a vehicle frame!
I am totally satisfied with the product, delivery, and the amount of very useful information on the etrailer.com site. Excellent company!
by: Chris 01/28/2020
If you don't have an air compressor for shocks, it should take no more than an hour including finding tools.
If you have an air compressor give yourself at least another hour or more.
With the wiring kit and making everything look factory installed it took me about 4 hours.
Chris
3/8/2021
Great , works as it should.
by: Steven 06/28/2021
Bought this to trailer my bikes with a bike rack that hooks to the hitch. It has worked great! Excellent product.
Steve K.
6/29/2022
Great! No problems - fit perfectly - good product!
by: Roy.06/10/2022
. The hitch is of very high quality mat erial.
Roy E.
6/10/2023
After this first year of steady reliable use I would strongly recommend this hitch system.
by: Michael11/03/2022
Fits vehicle well, but sits too low, and bottoms out over speed bumps in parking lots..Rear carrier bottoms out over very small bumps..This is with new air shocks installed..
by: Sarah 09/22/2022
2008 Ford Taurus
Great hitch! We installed it on our 2008 Chevy van and hitched or 1973 Taurus travel trailer to it. Drove it from Mountain Grove, Missouri to Corbin, Kentucky -540 miles- with no issues! Very happy with this product.
by: Dave B06/19/2012
2005 Saturn Relay
I openly consider myself to be one of the least mechanically inclined individuals on the planet! Needless to say that when my wife brought up the topic of putting a trailer hitch on our Saturn minivan I felt a rush of insecurity and trepidation flood over me, especially since she was suggesting doing it ourselves. After blacking out for a short period of time I awoke to my wife saying that she had come across the e-trailer website and that it was very helpful. Of course that is easy for her to say since I would end up being the one under the back end of the minivan with lots of parts and no idea what to do with them. However, after further review e-trailer proved to be different than the other websites. They set themselves apart with their helpful, detailed and easy to follow videos as well as their outstanding customer service. Every step of the way I had knowledgable and committed support if needed (even after the purchase was finalized). The parts arrived in a very speedy fashion and just as ordered. True to the descriptions and online support all of the parts were in fact proper fitting and as easy as described to install. I would most definitely recommend using e-trailer for anyone in the market for a hitch, in particular non-motor heads like myself.
by: Dan 07/16/2023
2007 Chevrolet Uplander
Videos were detailed and helpful. Easy install.
by: Aaron02/12/2012
Levelling compressor caused issues - with no templates it was a little tricky. In hindsight, I should have mounted the hitch temporarily with the compressor between the hitch and chassis rail, and drilled the extra hole needed through the compressor mounting plate (don't apply too much pressure or you'll drill into the weld nut threads once you go through the compressor mounting plate).
If aestehtics are important to you, the black paint/coating on the hitch scratches easily, so make sure you have a blanket or something else to rest the hitch on while you're working.
Otherwise the install went just like the video said.
by: Nick05/21/2018
2008 Chevrolet Uplander
Easy install. Directions were pretty good. If you get the hitch get the plug and play wiring harness too. Easy install. Hitch just pokes it head out from under the bumper. Looks good. No complaints and shipping was fast. So glad I found this site.
25
144
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Trailer Hitch and Wiring Recommendation for 2009 Chevy UplanderFor your 2009 Chevy Uplander we have the Draw Tite Hitch part # 75278 as a confirmed fit that would work well. It installs easily, is mostly hidden, and has great towing capacities. Then for trailer wiring the Tekonsha kit part # 118396 would be a really great option that installs easily as well. Pour votre Chevy Uplander 2009, nous avons la pièce d'attelage Draw Tite # 75278 comme un ajustement confirmé qui fonctionnerait bien. Il s'installe facilement, est principalement caché et possède...
view full answer... - Recommendation for Complete Towing Setup on a 2007 Chevrolet Uplander 3.9 LiterI did some research on your 2007 Chevrolet Uplander and found that the maximum recommended towing capacity for this vehicle is 3,500 pounds. If your trailer is 2,600 pounds empty, you would be limited to 900 pounds or less of cargo. If 900 pounds of cargo sounds about right, you will need to check your hitch capacities and make sure it is capable of towing 3,500 pounds. You may find that a weight distribution system is needed to safely tow the maximum capacity with your vehicle. You should...
view full answer... - Trailer Hitch and Wiring Recommendation for a 2006 Chevy UplanderWhenever available I always recommend a Class III 2 inch hitch for vehicles as they have higher towing capacities and since more accessories are made for 2 inch hitches they offer greater flexibility as well. For that you would want the Draw Tite hitch part # 75278. I attached an install video for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop...
view full answer... - How Do I Know My Chevy Uplander Can Tow Long DistanceThe best way to make sure the vehicle can make that long of a trip is to have it checked by a mechanic. Since we are not there to actually check the vehicle over it is impossible to tell. You may be able to add a transmission cooler such as Derale Series 8000 part # D13503 if you have the space to install. A lot of customers add a transmission cooler to older towing vehicles to prolong the life of their transmission. Here are all of the correct components to tow the trailer with the...
view full answer... - Trailer Hitch Receiver to Fit a 2002 Isuzu TrooperThe correct trailer hitch receiver to fit your 2002 Isuzu Trooper is the Curt Trailer Hitch Receiver # C13098. It's a custom hitch designed specifically for your vehicle. The # 75278 you asked about does not fit your Trooper because it's designed for GM mini vans, like the Chevy Uplander, from 1997 to 2009.
view full answer... - Trailer Hitch Receiver to Fit a 2017 Nissan QuestThe Draw-Tite hitch you were looking at, part # 75278, fits GM vans of the late 1990's and early 2000's. Trailer hitch receivers are custom designed for specific vehicles so that they install in the best possible location. The correct hitch for your 2017 Nissan Quest is the Curt part # C13078. It bolts onto existing mouting locations on your van so there's no drilling. I've linked an install video on a 2016 Quest which is the same generation so the process is the same. If you're going...
view full answer... - Installation Of Draw-Tite Trailer Hitch Receiver # 75278 On 2006 Chevy Uplander With Load CompressorOn your Chevy Uplander, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75278 will fit with your load leveling compressor. It will take some extra time to make sure that you have the proper fit, but the bracket will reinstall over the hitch receiver mounts. From your photos it appears you have already removed the only bolt that is required to be removed for installation. I've attached in the installation details for you.
view full answer...
- Setting Up a 2004 Chevrolet Venture to Tow a 2,500 Pound Camper with Trailer BrakesSuspension supplements like the Timbren kits we carry may or may not be needed. At 2,500 pounds dry you should be within the tow capacity of the Venture. If your total trailer weight is close to the limit of the van, then I would suggest a suspension supplement. Since you will be towing a camper that will have pretty much the same load each time, I would suggest the Timbren Suspension Enhancement System as it will not need to be adjusted for varying loads. You would use part # TGMRREN if...
view full answer... - Trailer Hitch Fit for 2015 Chevy MalibuThe Draw-Tite # 75278 isn't a fit for a Malibu, it's a fit for various GM minivans, such as: • 1999 - 2005 Pontiac Montana • 2005 - 2007 Saturn Relay • 1997 - 2004 Oldsmobile Silhouette • 2005 - 2007 Buick Terraza • 1997 - 1999 Pontiac Trans Sport Van • 2005 - 2009 Chevrolet Uplander • 1997 - 2005 Chevrolet Venture • 2005 - 2009 Pontiac Montana SV6 Extended Wheelbase • 2005 - 2009 Pontiac Montana SV6 Regular Wheelbase For your 2015 Chevy Malibu, I'd recommend the Curt Class II hitch,...
view full answer... - How to Order Replacement Install Hardware for a TrailerWe do sell replacement hitch hardware with the part number # RHK. You'd need to enter the part number of the hitch you have as well as select its manufacturer and we'll send you out the correct hardware.
view full answer... - Recommended Trailer Hitch and Wiring for 2008 Chevy Uplander For your 2008 Chevy Uplander, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75278. This Class III hitch is confirmed to fit your vehicle and has more than enough capacity to pull your 1,000 pound trailer with inflatables. It will provide you with a 2 inch receiver that will work great with a ball mount for towing or other accessories such as a bike rack that you may want to use down the line. I have attached an installation video on your Uplander that you can use for...
view full answer... - Recommended Class IV Hitch for 2017 Coachmen FreelanderWe do have a Class IV and V hitches available, but none of them are a confirmed fit for your 2017 Coachmen Freelander. The only option would be a universal hitch. I recommend the # 41990-07 Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Class V which requires weld on installation. The # 41990-07 fits vehicles with frames up to 44" so you will need to measure your frame rails before ordering. Although this hitch has a maximum gross trailer weight of 16,000 lbs and tongue...
view full answer... - Trailer Hitch Receiver Fit For 2006 Saturn Ion Red LineWhile we do have a trailer hitch receiver fit for your 2006 Saturn Ion Red Line, the # 75278 will not fit the Red Line models. Instead, there is a different hitch that is designed to fit your Red Line: - Draw-Tite Sportframe Trailer Hitch Receiver # 24756
view full answer... - RV Trailer Hitch Receiver for Trailer With I-Beam Frame and 3 Inch Square Sewer Tube ClearanceThe ideal RV hitch for your application is the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This is designed for I-beam trailers and will give you the 3 inch drop you are seeking. I've attached a video of the installation as well as a photo of the dimensions to assist.
view full answer...
- Hitch, Wiring and Ball Mount Kit for 2007 Chevrolet Uplander Towing Multiple TrailersIf your 2007 Chevrolet Uplander has the 121-inch wheel base then the easiest hitch install will come with the Curt 2-inch Class III hitch # 13336 since this option is a no-drill install. This hitch and the 1-1/4-inch Curt # C12336 are the only such no-drill hitches offered. If your Uplander does not have this 121-inch wheel base then the option I suggest is the Draw-Tite # 75278 which does require drilling but costs less than others. Written instructions for all referenced hitches are...
view full answer... - Recommended Trailer Hitch and Wiring for 2005 Toyota Sienna I do have a great option for you, however the Draw-Tite Max-Frame Trailer Hitch Receiver # 75278 referenced in your question will not fit your 2005 Toyota Sienna. This particular hitch is designed for certain model Pontiac, Chevy, and Buick vehicles and will not line up with the frame of your Sienna. For your vehicle, I instead recommend the Draw-Tite Class III Max Frame # 75237. This Class III hitch is confirmed to fit your 2005 Toyota Sienna and will use existing holes in its frame...
view full answer... - How To Determine If 2009 Pontiac Montana SV6 Has Long Or Short Wheel BaseTo figure out if your 2009 Pontiac Montana SV6 has the short or long wheel base would be to measure from the center of the rear wheel to the center of the front wheel, or you can call your local GM dealer with your VIN and they should be able to look it up for you. If you get a measurement of 113" then you have the short wheel base, and if you get a measurement of 121" then you have the long wheel base. With that said the Draw-Tite Trailer Hitch # 75278 you were looking at fits both the...
view full answer... - Will the Draw-Tite Trailer Hitch Receiver # 75278 Fit a 2008 Chevrolet Uplander LS MiniShortThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75278 is a custom fit receiver and is confirmed to fit your 2008 Chevrolet Uplander LS MiniShort with the 113 inch wheelbase. If you let me know what you will be using the trailer hitch for I can make some recommendations for you. I have also attached an installation video on a similar Uplander as well as the installation instructions that you can use as a reference.
view full answer... - Is Drilling Required for a Class III Hitch Installation on a 1998 Chevy VentureAll of the hitches available for your 1998 Chevy Venture require drilling for installation. On your 1998 model, you would be required to drill one or two holes, depending on the wheel base length of your vehicle. If your Venture is a short wheel base model, you would only have to drill for the rear most mounting holes closest to the vehicle bumper for the Draw-Tite # 75278 Class III. Long base models would require additional drilling for the forward most mounting hole on the passenger...
view full answer... - Equipping 2005 Saturn Relay for TowingStarting with the hitch, I would recommend the Draw-Tite Class III Receiver Hitch, part # 75278. If the vehicle was not equipped with the tow package which included the trailer connector, you will also need the wiring harness, part # 118396 to tap into the vehicle tail light circuits. You will need a draw bar, part # 2753 and a trailer ball. For a 2 inch ball, use part # 19247 for a 1-7/8 inch ball, use part # 19260. Your trailer should have the required ball size stamped somewhere on the...
view full answer... - Recommended 4 and 7-Way Trailer Connector for 2009 Pontiac Montana SV6It sounds like you're maybe trying to setup your 2009 Pontiac Montana SV6 for towing and trying to figure out the wiring. If that's the case then you'd first need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118396, this will provide you with a 4-way connection that has everything you need for the lighting signals. If you instead need a 7-way, you'll have to use an adapter like the 4 to 7-Way with 4-Way Adapter part # ETBC7 which still has all...
view full answer... - How to Pick Out Correct Ball Mount Rise/Drop for 2006 Buick Terraza Installing Draw Tite HitchYou are on the right track with all of the components you are planning for your 2006 Buick Terraza but there is more information needed to determine what rise/drop ball mount you would need. I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you...
view full answer... - How Does Hitch Install on Chevy Uplander with Load Leveling CompressorOn your Chevy Uplander, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75278 will fit with your load leveling compressor. It will take some extra time to make sure that you have the proper fit, but the bracket will reinstall over the hitch receiver mounts. Basically you just remove the one bolt that holds the compressor on and then install the hitch flange behind the bracket and the bolt through it.
view full answer...
- Hitch Receiver for Towing a Lawn Mower Trailer w/ a 2019 Chevrolet MalibuI have a solution for you but there are no class III hitches available for your 2019 Chevrolet Malibu. I recommend the Curt Trailer Hitch Receiver item # C12185. This is a custom fit, class II hitch, that bolts on with included hardware. It has a towing capacity that exceeds your Malibu's 1,000 lbs towing limit, so it being a class II hitch does not affect its ability to serve your needs. You should always go off of the component with the lowest towing capacity and in this case it will...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Video by:
Dustin K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
12/15/2023
That is not good to hear! I do see that this harness is not a confirmed fit for your 2006 Chevy Silverado. I have sent your information over to customer service for them to look into a return. I would be more than happy to assist you in finding a hitch that will fit a 2006 Chevy, but I will need to know what style vehicle it is. Once I have that information, I would love to help.