Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs
(56 reviews)
Price: $115.55
In Stock
Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs
Item # TK5007
Our Price: $115.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (56)
- Q & A (0)
- Photos
Convert-A-Ball Trailer Hitch Ball Mount - TK5007
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 10 Inch
- Rise - 9 Inch
- No Ball
- 5000 lbs GTW
- Class III
- Convert-A-Ball
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs.
Features:
- Functions as a rise or drop to help you level your trailer
- Tow vehicle and trailer need to be within 2" of each other for proper weight distribution
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin
- Constructed of weather-resistant, coated steel
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 5,000 lbs
- Tongue weight capacity: 500 lbs
- Drop range: 4-1/4" to 10-1/4" from top of hitch receiver tube
- Rise range: 3" to 9" from top of hitch receiver tube
- Adjusts in 2" increments
- Ball hole diameter: 1"
- Shank length: 15-5/8"
- Distance from center of ball hole to center of hitch pin hole: 12"
- 2-Year limited warranty
TK5007 Convert-A-Ball Adjustable Ball Mount for 2" Receiver - Max Rise 9", Max Drop 10-1/4"
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs - TK5007
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs.by: Frank12/05/2022
This ball mount gives me the adjustment I needed on my Dodge Grand Caravan when I rent different trailers. The part that goes into the hitch does have a little play but it is no worse than my current fixed height ball mount. The adjustable ball mount with the 2 pins also has about a 1/8" play so be ready for that if you buy this adjustable ball mount. That would be the only improvement I think they could make in the future is to have the pins a little larger and/or the holes a little smaller to reduce the play. However, this might just be the way these need to be designed at this price point based on the research I have done with other adjustable hitches.
by: Steven B.12/17/2018
Unit worked, but the fit between the 2.5" adapter and the hitch was loose. It caused the trailer to rock back and forth with every application of the brakes. Had to make shims to stop unit from clanking. Felt like if length of attaching piece was longer it would had helped. Attached picture to help illustrate.
by: Robert 05/04/2024
just what i needed
by: Daniel01/14/2023
It was one of the few things that gave me enough drop to hook my Truck up to my small utility trailer! hook my Tahoe up to my small utility trailer
by: David V12/02/2020
I have a new 2020 Chevrolet Traverse which replaced a 2017 model. I travel between New York State and Florida each winter hauling a small cargo trailer, This year I discovered the trailer was not riding level as it did with the previous car and was about 6 to8 inches high at the front of the trailer. Aside from the appearance factor this condition made it difficult to load and unload the trailer, the contents of which tended to gravitate toward the rear. After unloading I looked at a few hitch replacements but none had sufficient "drop" to rectify this condition. This less than satisfactory solution and the price prompted me to look elsewhere. I got on line at etrailer.com and found the answer to my problem at a more reasonable price. The adjustable hitch is a heavy duty unit and my troubles are history.
by: Steven11/03/2018
This product was received and installed on the follow day (today). It was installed into a C13587 Curt trailer hitch receiver bought from etrailer previously and installed onto a Mercury Montery FuddyDuddyMoble. My concern all along has been pulling a small boat with this vehicle, but, the video for the this trailer hitch receiver IS THE SAME VEHICLE (but the Ford version) as I have, and mine has a factory installed Class II towing package. EVERYTHING went extremely smooth. etrailer's videos are clear, helpful and instill confidence. This adjustable ball mount slipped easily into the receiver, the pins (2) slipped into the connection easily, AND, the snap lock pins were easily assembled by hand. I was thinking they might require some force with a tool, but it wasn't necessary. I only have one warning about etrailer's recommendations and products: They'll make you think you're a better mechanic than you actually are.
by: Michael01/21/2021
I use it on my 112 foot utility trailer and it works great . I did have to get the right length so it would fit thru the receiver fOr a 2 ' BALL
by: Mark 11/02/2022
Excellent customer service makes purchasing my trailer equipment a breeze
by: Don McNeill05/14/2018
It's just a ball mount but what really stands out is the ease of use of their web site and the excellent delivery time.
Have purchased several items in the past and always excellent delivery time. I've never had to contact customer service which in itself say everything.
If you need anything to do with trailer or attaching trailer to vehichles this is the place to go.
by: Robert 11/24/2021
Superb quality, shipped fast, low price too!
by: Alan08/27/2019
Explained that I up graded to a 3/4 ton and needed a adjustable drop that would still use a 1 inch shank ball mount. They found just what I needed and at the best price.
by: Tim09/26/2020
The hitch was exactly as stated. It worked great to be able to lower down and put a little more weight on the towing vehicle to help with handling.
by: John 06/24/2022
Solved a significant problem in our set-up and made installation a breeze!
by: Rock 03/02/2023
I was happy with the quick response and the product looks well made and is very nice
by: Douglas 03/20/2023
Just what I needed at a good price
by: Fred 01/31/2020
This product works out real well. Yourinstructions on how to measure the rise was perfect.
by: Scott K05/04/2019
Great product. Perfect for a drop hitc h.
by: Mike T.02/04/2018
Great price with quick shipping. Well built and fully adjustable.
by: JM Herman09/24/2008
PerfectHeavy, but what a reliable set-up!
by: Milford08/16/2022
Fast shipping
Good product
Just what I needed
by: Airstream107/28/2022
Great product, dont even hesitate.
by: Michael06/23/2022
Works as advertised, used for a year still in great shape
by: Dale 08/12/2021
All items from the order were packaged great for shipping, shipped in a timely manner. Should be able to select a drop position very quickly.
by: Robert06/10/2022
Good quality. Arrived a day early. Product as described.
by: Daniel 06/01/2020
Easy to use and in mint condition. I would definitely buy this product again!
25
56
Show More Reviews
See what our Experts say about this Convert-A-Ball Trailer Hitch Ball Mount
- Adjustable Ball Mount Option that Can do Drop of 10 inches and is Cost EffectiveClearance issues with the collar lock style of trailer couplers are not typical. I'd be inclined to believe the issue is related to the ball mount you have now not having the clearance. We have the Convert-a-Ball adjustable ball mount # TK5007 which can do a drop of up to 10 inches and is priced really great. This gives a very standard ball mount platform too so clearance would not be an issue. I attached a review video for this for you to check out as well.
view full answer... - Does Brophy Ball Platform Have Vertical Adjustment Holes 1-1/4 Apart on CenterAccording to the review video we have of the Brophy # RTB1 ball platform those holes used to vertically adjust this piece are 2" apart on center. It kind of sounds like you have a shank for a weight distribution system as the 1-1/4" height measurement tends to be a standard with those. Since the head unit for a weight distribution system tends to be a bit pricey I recommend just replacing the whole thing with a more cost-effective whole unit like the Convert-a-Ball # TK5007 or even the...
view full answer... - Can Locks be Ordered for Hitch pin and Platform of Adjustable Ball Mount TK5007 Keyed AlikeYou'd want to order one of the # e98880 for the hitch lock and then two of the longer part # e98881 for the locking pins for the ball mount platform of # TK5007 and if you select "keyed alike" on the product pages of both locks they'll all show up using the same key.
view full answer... - 2017 Jeep Grand Cherokee Options Needed To Tow a TrailerOn your 2017 Jeep Grand Cherokee, if you do not already have a 4-flat trailer plug installed, then you will need to install wiring harness to allow you to use the lights on the Detail K2 trailer, # K2MMT5X7. The wiring harness that I recommend is the Tekonsha 4-Pole Flat Connector, # 118384. This harness is designed to plug in to the existing wiring of your Jeep with no cutting or splicing. The harness will allow you to run the trailer lights off your vehicle's lights. Next, you will...
view full answer... - Recommendation For A Hidden Hitch For A 1986 C-10 Shortbed Truck With a Regular BumperThe Draw-Tite Class III Max Frame Hitch # 75034 that you referenced will work for your 1986 Chevy C-10. The hitch is designed for the 6 foot shortbed C-10 with the the standard or step bumper and is the replacement for the HIdden Hitch Brand which is no longer available. The Draw-Tite hitch is a Class III hitch with 5,000 lbs towing capacity and 500 lbs tongue weight capacity. However, your vehicle's tow and tongue weight capacity might rate lower than this hitch's capacity. Make sure you...
view full answer... - Hitch Recommendation For A 2015 Subaru ForesterA reason for choosing a Class III hitch over a Class II is the 2 inch receiver opening on the Class III hitch. The 2 inch hitch is the most common hitch size today. Class II hitchs use a 1-1/4 inch receiver opening. Having a 2 inch receiver opening will give you more options for trailer and hauling accessories. Many of the bike racks, cargo racks and other hauling accessories have the 2 inch hitch shank. The gross trailer weight rating for the Class III hitches for a 2015 Subaru Forester...
view full answer... - Can a High/Low Adapter be Used to Tow Pintle Hook Trailer With Standard 2-Inch HitchSince the height of your pintle-equipped military trailer is so much greater than the height of the hitch on your Honda Pilot (possibly as much as 2 feet) I am not sure there is any way to keep the trailer level when hitched. We do not offer an adapter that can make up this substantial height difference. I suggest you check your Honda Pilot owners manual to confirm the vehicle tow rating. Tow ratings can vary by model year and based on the specific equipment set in your Pilot. You want...
view full answer...
- Trailer Hitch Recommendation for a 1999 Ford F-150 XLT 4x4 Towing a Boat TrailerThere are a few factors that you will need to consider when choosing a trailer hitch for your 1999 Ford F-150 XLT 4x4. First, you will need to know the weight of the trailer or trailers that you intend to pull and the towing capacity of your truck. Class III trailer hitches like the Draw-Tite Hitch Trailer Hitch, # 75065, are common trailer hitches for customers that tow boats. This hitch will fit stepside or styleside models and has a tongue weight capacity of 500 lbs and a towing weight...
view full answer... - Recommended Hitch Receiver and Adjustable Ball Mount for 2004 Ford RangerFor your 2004 Ford Ranger, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75082. This will give you a sturdy hitch with an easy bolt-on installation. The 2 inch receiver will give you more options of accessories and a higher rated hitch for towing capacity and tongue weight. For your 2 inch receiver I recommend using the Convert-a-Ball Adjustable-Height Ball Mount # TK5007. This will allow you to use a 2 inch ball like # 63845 or a # 19260...
view full answer... - Will an Adjustable Ball Mount Work with a Ram 1500 with a Four-Inch Lift Kit?For a Ram 1500, the Buyers Products Adjustable Tri-Ball Mount, # 3371802225, will give you nearly six inches of drop and may work for your vehicle, but you are going to need to measure to make sure. To figure out which rise or drop you will need, first park your Ram and trailer on level ground. From there, measure from the ground to the top of the trailer hitch receiver on the Ram. Then measure from the ground to the bottom of the coupler on the trailer. You will need a ball mount with...
view full answer... - Adjustable Ball Mount for 2019 Ford Ranger Towing Travel TrailerThe best option we can provide without knowing the trailer and hitch height would be an adjustable ball mount like the # TK5007 which can be adjusted up to a drop of 10 inches so we know it can give you the ability to tow your trailer level.
view full answer... - Availability of 1-7/8 Inch Trailer Ball For EZ Hitch Adjustable Ball Mount Part # AM3296I have spoken with one of my contacts with Andersen Manufacturing who tells me that a 1-7/8 inch trailer ball is not available for the EZ Hitch Adjustable Steel Ball Mount. I understand that they currently have no plans to offer one. Your best bet would be to go with the EZ Hitch you were looking at, part # AM3296. For your smaller trailer that uses the 1-7/8 inch ball, assuming that you are needing a maximum of an 10 inch drop I would suggest an adjustable ball mount like part # TK5007...
view full answer... - Ball Mount Recommendation for a 2017 Kia Sedona LX to Tow a Pop-up CamperFor a fixed ball mount you really do need to know the height difference between the top of the receiver opening on the hitch and the distance from the ground to the bottom of the coupler in order to get a ball mount with the right amount of rise or drop to tow the trailer level. You can get around that by instead using an adjustable ball mount such as # TK5007. This ball mount offers up to an 9 inch rise or 10 inch drop. It is rated for 5,000 pounds gross trailer weight (so it will cover...
view full answer... - Recommended Hitch Ball Mount And Hitch Balls For 2015 Ford F-150 XLTWhen you are towing a trailer you want the trailer to be as level as possible behind your F-150. I have attached a helpful article that explains how you can measure to find the best ball mount. You just need a tape measure to do this. Park the truck on level ground and then measure form the ground to the top of the receiver opening. Then measure the distance from the bottom of the trailer coupler to the ground. If the hitch height is greater you will need a ball mount with a drop. If...
view full answer... - Adjustable 2-Inch Ball Mount to Allow More Clearance for Garaging Boat TrailerIt sounds like you need a ball mount with more than 3-inches of drop to allow your boat's windshield to clear the bottom of your open garage door as you move the trailer inside. If I understand things correctly it is just the combination of the windshield's height and the driveway's angle that are the issue. I suggest an adjustable 2-inch ball mount. One of these will allow you to lower the ball and therefore also the trailer's tongue when you need to garage the boat and trailer and then...
view full answer... - Ball Mount, Ball, and Trailer Wiring Harness Recommendations for a 2010 Honda CR-VI will be happy to get you the rest of the parts you will need to tow the rental trailer with your 2010 Honda CR-V. First for a ball mount we need to determine the hitch class you installed on your CR-V. Different hitch classes require different sized ball mounts and for the 2010 CR-V there are Class I and Class III hitches available. A Class I hitch will have a 1-1/4 inch receiver. A Class III will have a 2 inch receiver opening. If you have a Class III hitch with a 2 inch opening I recommend...
view full answer... - Determining Correct Ball Mount for 2007 Honda Odyssey to Tow Pop Up CamperThe way to determine the correct amount of rise (or drop) needed to tow a trailer level there are a couple of measurements needed. First you would measure from the ground up to the top of the receiver opening on the trailer hitch. Then, with the trailer level, measure from the ground to the bottom of the coupler. If the trailer is higher the difference is the amount of rise you will need. And if the vehicle is higher the difference is the amount of drop you would need. On the 2007 Honda...
view full answer... - How to Pick Out a Ball Mount for a 2007 Nissan Titan with a Curt Hitch Towing Rental TrailerThe Curt Trailer Hitch # C11315 that you referenced would be the correct hitch for your 2007 Nissan Titan. In order to pick out the correct ball mount for you will need to know the height of the trailer coupler. Check out the FAQ article I attached that shows how to determine the correct rise/drop ball mount for a setup. Since you do not know the height of the trailer you plan on towing you have a couple options. You could get an adjustable height ball mount, you could call the company...
view full answer... - Ball Mount to Tow a Jayco Trailer with Coupler 16 Inches From Ground with a 2012 Audi Q7We have yet to install Curt trailer hitch # 13220 on a 2012 Audi Q7 but on another vehicle that uses this same hitch it measured 18-1/2 inches from the ground to the top of the receiver opening. In that case you would use a ball mount with a 2-1/2 inch drop, or as close to that as possible, for a level coupler height of 16 inches. The tongue weight of the trailer will pull down some at the ball so I recommend a ball mount with a 2 inch drop such as # D-4, Hitch Pin and Clip, # PC3, or...
view full answer... - Adjustable Ball Mount Recommendation for Towing Unknown Trailer Coupler Height LevelThe only option I can guarantee will work to allow you to tow your trailer level would be an adjustable ball mount since you would be able to set it at the perfect height for any trailer you may plan to tow. The best deal on that is the Convert-a-Ball Ball Mount part # TK5007. For a 2 inch ball the part # 63845 would work and then for a 2-5/16 inch ball the part # 63847.
view full answer... - How to Deal With Ball Mount Slop in Hitch ReceiverTo help keep the Adjustable Ball Mount for 2" Hitches # TK5007 snug you'll need an anti-rattle device like the Malone # MPG908 which clamps down or the Let's Go Aero # 63232 which uses a block and threaded locking hitch pin. These basically stabilize the shank of your ball mount to help keep it snug up against the hitch. This is pretty common for any ball mount no matter what price-point you're looking at. I've attached some review videos of these parts for you to check out.
view full answer... - How to Carry a 325 Pound Motorcycle with a 2006 Honda CR-VNo. The 2006 Honda CR-V's tongue weight capacity is set in stone. Even though the trailer hitch is rated higher you always have to go by the lowest rated component in the system. Your best option is to place the bike on a small trailer such as # K2MMT4X6 or a trailer designed specifically for motorcycles. Using a trailer will actually put much less stress on the vehicle and it is the safest way to transport the bike. If you do decide to go with a small trailer then you will need a ball...
view full answer... - Is a New Ball Mount Needed To Use the Curt RockerBall Shock Absorbing 2 Hitch BallThe Curt RockerBall Shock Absorbing 2" Hitch Ball part # C40047 will add 1-1/2" of height to the ball platform so you will then indeed need to get a ball mount that has more drop or can be adjusted to have more drop. I have attached a list of our options below if needed. The Convert-a-Ball Adjustable-Height Ball Mount part # TK5007 is a great adjustable option.
view full answer... - Can the Adjustable Ball Mount TK5007 Be Used in Both Rise and Drop OrientationThe Adjustable Ball Mount # TK5007 can be used as either a rise or drop hitch, so you can use it in either manner without compromising the strength of the setup. This ball mount can be adjusted by either flipping it upside down, or removing the pull pins and flipping the ball mount in the other direction. I've linked a review video we did of this ball mount for you to have a look at, as well.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Installed by:
Shane H
Installed by:
Aidan B
Video Edited:
Jacob T
Video Edited:
Dustin K
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Mike S
Updated by:
Matthew E
Video by:
Charles A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert B.
11/25/2022
I have been using this for a year on my F350 and it puts my Nomanco motorcycle trailer and a perfectly level towing position. It tows so nice! Great quality product. Looks new after a year.