Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless
Item # C6304
Retail:$224.99
Our Price: $135.01
You Save: $89.98
Confirmed to Fit
2010 Chevrolet Silverado
1500
2500
3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (56)
- Q & A (0)
- Photos
2010 Chevrolet Silverado - Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless
- Removable Tail Light Kit
- Bypasses Vehicle Wiring
- Magnetic Mount
- Universal
- Hopkins
Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.
Features:
- Removable tow lights provide stop, tail, and turn functions for your trailer or towed car
- No need to wire your trailer or tap into wiring on your towed car
- Wireless transmitter eliminates the hassle of running cords to the lights every time you tow
- Plugs into 4-pole flat trailer connector on RV or tow vehicle and mounts to the frame with a magnet
- Emits a signal that triggers tow lights from up to 65' away
- Operates on a standard 12-volt system
- Heavy-duty, non-scratch magnets on the lights provide a secure grip without damaging your paint
- Long-lasting LEDs are more efficient, faster acting, and brighter than incandescent lights
- Sonically sealed lenses keep moisture out and prevent corrosion
- Durable polycarbonate bases house batteries
- On/off switch lets you use the lights as needed, conserving battery power
- 8 AA batteries (not included) are required to power the lights
- Flashing LED on driver's-side light indicates low battery
- Department of Transportation compliant
Specs:
- Application: towed cars or trailers no wider than 80"
- Light diameter: 4"
- Length of wire between lights: 106"
- Transmitter wire length: 76"
- 90-Day warranty
These wireless, removable tow lights make it easy to add running lights, brake lights, and turn signals to your towed car or trailer. With this setup, you won't need to tap into existing wiring for installation. With other magnetic tow lights, you have to run cords from the lights to the front of the towed car or trailer every time you need to tow. These tow lights work wirelessly to eliminate that hassle. And the wireless design also allows you to move the lights from one vehicle to another in minutes.
The lights attach directly to any metal surface with the included heavy-duty, non-scratch magnets, which won't damage your paint. And the handy on/off switch lets you use the lights only when you need them, saving battery power.
Setup is simple. Plug the included transmitter into the 4-way flat trailer connector on your RV or tow vehicle. The transmitter mounts to the frame of the RV or tow vehicle using the built-in magnet. Turn the switch on the driver's-side light to "on," and attach the tow lights to the back of the towed car or trailer, as far apart as is practical. Secure any excess wire between the 2 lights with a twist tie.
Each light is powered by 4 AA batteries (not included). A blinking LED indicator on the face of the driver's-side light signals low battery. This indicator should be checked every 2 hours to be sure your lights still have adequate power.
C6304 Hopkins International Wireless, Magnetic LED Trailer Towing Light Kit - 4-Wire Connector
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Defective
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless - C6304
Average Customer Rating: 4.6 out of 5 stars (56 Customer Reviews)
Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.by: James 06/02/2024
2024 Ford F-150
Used these to tow aluminum body F150. Magnets strong enough to securely attach below rear bumper which is about the only steel part available. Super easy to set up and they work perfectly
by: Judy 04/15/2024
Honda
They work great on my Class C pulling my Honda CRV.
by: Brian 04/17/2024
2019 Thor Windsport Motorhome
I just received them and tested them out and they work great. They are very bright and responsive. I look forward to using them in the future when I tow my vehicle behind my RV.
by: Marty 05/31/2024
Haven’t used it yet. Looks good and delivery was fast.
by: Mike 04/04/2024
Very bright and quite easy to install
by: Kenny 12/01/2023
2003 Chevrolet Malibu
VERY GOOD SERVICE I HAVE ORDER THINGS FROM FOR YEARS I THINK THEY ARE THE BEST BAR NONE
by: Brian04/28/2024
Have issues with lights blinking erratic
by: John K07/15/2016
Ordered these because my car towing wiring had a problem and didn't have time to get it fixed. First set arrived but had a manufacturing defect and right hand light didn't work (not etrailer's fault!). Called etrailer and they were very accommodating in sending out a second set which arrived in time. The second set worked perfectly. Good service and extensive follow up by etrailer shows they care. I'll use them for other purchases any time!
by: Tom M07/10/2017
No big deal, install batteries and put on toad !
Should have done this years ago before they cut into my tail light wiring and also had to deal with rusted out 4 prong plug in over the years.
Tom M.
7/10/2018
Still the best and not a problem, quality product
by: Daniel 03/21/2023
Test connection went perfectly. Will see how it goes when we hit the road in May. The lights look well made and should last me a long time.
Thank for the great service!
by: Robert 09/16/2023
Wonderful product
by: Dan 05/04/2020
Lincoln MKZ
These things are the best thing since sliced bread!
We have a Lincoln MKZ that already has a hitch on the rear for towing a small enclosed trailer. The thought of having to "hard" wire in a wiring harness for towing behind the motorhome that would still allow the trailer to be towed was not a task I was looking forward to. etrailer suggested these as an alternative. Literally plug and play. Just plug the transmitter into the motorhome, install batteries and attach the magnetic based lights to the trunk of the MKZ and presto! DONE! I hooked the car up behind the motorhome and ran it down the freeway at 60-65 mph and all was good. Worked straight out of the box! Fantastic product!
by: Jerry 07/08/2023
Works great no problems easy to install
by: Jack 01/23/2023
Great looking lights, LED wireless hook up makes this an easy installation and easy choice.
by: Bud Berger08/01/2017
Saturn Ion
These work well, bright. They do eat up regular Duracell batteries. After first use of these I switched to Lithium Ion. The lights were noticeably brighter in the daylight sun. The life of the batteries has drastically improved service. I have a habit of removing the batteries when not in use to enable greater duration; they do have an on/off switch built in, but it's so simple to remove them in case of phantom degradation. Over-all, I am very happy with these and installation on the car is a snap. Love them so far. Would buy/recommend to others.
by: Cheryl a.05/23/2018
2011 Ford Taurus
Was absolutely 100% delighted with this product. Drove a total of 2600 miles in all kinds of weather and traffic conditions and these lights worked perfectly. Batteries lasted all most to the end of the trip. I'd recommend this set up to everyone who cannot afford to have wiring redone on a vintage trailer.
by: John08/10/2022
I bought the wireless Hopkins tow lights to temporarily tow my new Jeep behind our Motorhome until I could wire the taillights permanently. I liked them so well that I have never wired the Jeep and only use the wireless taillights.
by: Dan 12/22/2022
very easy to see and use. I hope I never have to rewire another old trailer. Love them.
by: Stan 06/01/2023
Great customer service
by: Donald 05/26/2023
Great experience.Fast service.
by: Miles M05/30/2019
These have been a lifesaver for our camper lights not working properly. Never had an issue with these
by: John 02/09/2023
2010 Honda Element
I have not tried this yet, but the design is excellent! Having a magnet on the transmitter to attach to the tow vehicle was just icing on the cake!
by: Phillip 01/20/2023
Great system
by: Michael03/28/2018
Product appears to work as represented. Have not had it on the road yet.
Michael
3/28/2019
Lights work great, and battery life is better than expected. Only issue is potential for paint damage... I recommend that the manufacturer consider a softer landing pad to reduce potential for paint scratches.
by: Camping man12/19/2022
works just like Quinn said
25
56
Show More Reviews
See what our Experts say about this Hopkins Tow Bar Wiring
- Recommended Tow Bar Wiring Solution for 2004 Honda CR-VGenerally speaking, your tow bar wiring is all going to have the same function- to provide signals to your vehicle lights. Some wiring differs in that it contains diodes to protect your vehicle's from electrical malfunction/backfeed and some of them have different connections to the RV. If your RV has a 7 way connection, then something like the Roadmaster # RM-15247 provides the best solution for protecting the vehicles from backfeed in the event of a short. If you've got a 4 way on the...
view full answer... - Will Optronics LED Magnetic Tow Lights Protect Against Scratching 2018 Ford Fiesta SE Paint?The Optronics Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2 # TLL21RK has a protective label pad on the bottom to keep from scratching paint. You can see this at the 2 minute mark of the attached review video. I do recommend wiping down the vehicle with a microfiber cloth before putting the lights on simply to remove any dust or debris that could be abrasive between the scratch free label and the paint for added security.
view full answer... - Magnetic Flat Towing Light Recommendation that are LED and have 4-Way Flat ConnectorThe bulbs of the Roadmaster Standard Magnetic Tow Lights # RM-2120 are incandescent, they are not LED. A better option would be the Hopkins Magnetic Tow Lights # C6304. This kit uses LEDs and comes with a 4-way flat already. I attached a review video for you to check out as well.
view full answer... - Recommended Tail Light Wiring Harness for Flat Towing 2018 Ford Edge SELThere is not a plug in wiring harness available for your tow bar wiring on your 2018 Ford Edge SEL. There is one for the Sport and Titanium, but not for the SEL or SE models. For your application, I recommend the Roadmaster Standard Magnetic Tow Lights # RM-2120. If you can't find a viable mounting location due to a glass roof, this kit will fit into your rear hatch to hold the lights in place. If you need the 4-way harness, I recommend the Hopkins Magnetic Tow Lights - Red LEDs...
view full answer... - Will Magnetic Tow Lights Work through a Plastic Cover on a Steel Jeep BumperThe magnets on the tow lights like # C6304 are strong but I am not sure if they will work well enough with a plastic cover over the metal bumper of your Jeep. What I recommend is to go wit ha different type of kit, like # EZT20B that you could hook to the Jeep somewhere and not worry about magnets. Of you could secure some tow light partners, # TLP01, to provide a metal surface for the magnetic lights.
view full answer... - Tow Bar Lighting Recommendation for a 2002 Saturn S-SeriesA much easier solution that would give you a permanent flat tow lighting solution for your 2002 Saturn S Series would be to install a bulb and socket kit like part # RM-155. Basically with this kit you would install an additional bulb in the current taillight housing of your vehicle which the tow bar wiring will control. I attached an install video for this product for you to check out. Or if you really wanted to make a taillight kit with LED light bars you would want the part # STL79RB...
view full answer... - Which Base Plates for 2009 Mini Cooper Are Compatible With Roadmaster Falcon Tow BarIn order to use your Roadmaster Falcon towbar, you'll need to use the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 521878-1, which are a confirmed fit on the 2009 Mini Cooper. If you don't have a tow bar wiring/lighting solution for this vehicle yet, I recommend using the Hopkins Magnetic Tow Lights # C6304 , which are easy to install and can be reused if you end up switching dinghy vehicles at some point in the future. I've also linked all of our supplemental braking systems...
view full answer... - Can a 1995 GMC C/K Series Pickup Be Towed Behind Another VehicleIt is possible to flat-tow a 1995 GMC C/K Series Pickup. However, you will need a lube pump if you have a C1500 or you will need to disconnect the drive shaft if you have a K1500 without manual transfer case. In order to flat-tow the vehicle you will need a tow bar like the Curt Tow Bar with Adjustable-Width Arms part # C19745 and a lighting kit like the Hopkins Magnetic Tow Lights part # C6304 at the very least.
view full answer... - Can a Jeep J-10 Be Flat-TowedI was able to find online that others were able to flat-tow a Jeep J-10 so you can take that as you see fit but I do not have an official statement on this unless otherwise noted in your owner's manual. The process that others have used is as follows: 1: Unlock Hubs 2: Place Transmission In 1st Gear 3: Place Transfer Case In Neutral 4: Leave Steering Column Unlocked The parts you will need to flat-tow the above are a tow bar, the Curt Tow Bar with Adjustable-Width Arms part # C19745...
view full answer... - Can Hopkins Magnetic Light Kit part # C6304 Plug into Vehicle 7-WayYes you can plug the Hopkins Magnetic Light Kit part # C6304 into the 7-way of your RV but you'll need to use a 7-way to 4-way adapter like part # HM47365 as well.
view full answer... - Best Option for Magnetic Tow Bar LightsFor a set of magnetic tow bar lights the best option is the Hopkins kit # C6304. These have been reviewed highly by our customers so we know the magnet is strong and the light is very visible. Check out the review video to see more info on it as well.
view full answer... - Turn Signals are Dim with Brake Lights Applied on Magnetic Tow LightsIt doesn't sound like to me that there is anything wrong with the lights or wiring. The turn signal and brake light are both carried through the same dual filament bulb. The circuit associated with the brake light will generally be brighter than the circuit for the turn signal. I recommend switching to an LED option which will make the turn signals much brighter when the brakes are applied in comparison to a set of magnetic tow lights with an incandescent bulb. For this we have the MaxxTow...
view full answer... - Tail Lights for Bike RackI have something that might work for you. You can use # e98943-44LED but you may have to make a bracket or find a way to secure the lights to your bike rack. You could also use a set of magnetic flat tow tail lights # C6304. These will placed on the top of your car so that can be seen by other drivers. You will need a 4 pole trailer wiring harness on your vehicle to operate either of these kits.
view full answer... - Easiest Tow Dollies To Maneuver When UnloadedThe Demco Kar Kaddy X Tow Dolly # DM9713093 is our lightest tow dolly at only 510lbs. This would be the easiest to manuver in open areas and it has a tongue jack with a caster wheel. For smaller areas the Demco Kar Kaddy SS Tow Dolly # DM9713045 may be the better option as when folded it is only 67" long versus the X above at 147" long. Be sure to verify with your state laws to determine if additional Tow Lights # C6304 are required.
view full answer... - Recommended Magnetic Light Kit for Vehice Carrying MotorcycleThe simplest way to add supplemental lighting to any towing/hauling set-up is a magnetic light kit. Magnetic lights are inexpensive, fast to install and remove and they require no permanent alterations to your carrier or wiring. You could place a set of lights like # TL21RK on the MH's roof where they will be highly visible. These and most similar lights use a 4-pole harness for connection. We offer a wiring extension if needed, # HM47115. We also offer wireless LED magnetic lights, part...
view full answer... - Parts Needed to Flat Tow a 1998 Pontiac Trans Sport VanAccording to my research, your 1998 Pontiac Trans Sport Van can be flat-towed with all four wheels down but you will need to use a lube pump on the transmission to do so which we currently do not offer. I recommend confirming this with your copy of the owner's manual as that will have the final say so. In order to flat-tow this vehicle after you acquire the lube pump you will need a base plate kit, tow bar, safety cables, wiring harness, supplemental braking system, and possibly a high...
view full answer... - Can Roadmaster Tracker Tow Bar Be Used to Flat Tow 2006 Hummer H3The Roadmaster Tracker Tow Bar part # RM-020 can easily be used to tow your 2006 Hummer H3 once you install the Roadmaster Base Plate kit part # 2505-1 which is a confirmed fit. I attached an install video for this for you to check out as well. For safety cables you then would want the part # RM-643, for lighting you would want a universal, magnetic kit like part # C6304 which won't require an installation. And finally, most states now require supplemental braking in the vehicle being...
view full answer... - Can I Connect The Hopkins Magnetic Lights To 4-Pin and Still Use Brake ControllerThe Hopkins Magnetic Tow Lights part # C6304 are designed to be plugged into a 4-pin connector on a towed vehicle. If you want to use these on the vehicle and plug them into the 4-pin on the trailer you would not have the running lights on your trailer. Also it sounds like you are having an issue with the trailer wiring connector on your vehicle anyway if the trailer lights are not lighting up. I recommend to check the 4-pin wiring on the 2019 Land Rover Discovery for any damaged or frayed...
view full answer... - How to Flat-Tow a 2004 Saturn Ion Behind a Pickup TruckI am not sure what you mean by "mid" but the only 2004 Saturn Ion that can be flat-towed with all four wheels on the ground are the ones with a manual transmission. If you do have a manual transmission then you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have attached my recommendations for each of these parts below. For a base plate kit I recommend the Demco Classic Base Plate Kit part # DM9518151...
view full answer... - Recommendations For Replacing A Burnt Out Bulb In Magnetic Towing LightsMost of the time the lenses on magnetic tow lights will be able to just pop off, but not always. If there is a gap between the lens and the base, it will work. If there is no gap and the lens is sealed to the base, you will need to replace the whole unit with something like the Hopkins Magnetic Tow Lights # C6304. The LED lights will tend to last much longer than incandescent lights and will draw less power, so it is highly recommended. If you do have the gap and can get the lens off,...
view full answer...
- Magnetic Flat Towing Light Recommendation with 4-Way ConnectorThe Hopkins # C6304 LED magnetic tow light set is a good choice. The have good reviews and has a 4-way connector like you need. Check out the review video I attached for more info.
view full answer... - Where Would Magnetic Tow Bar Lights Attach on Vehicle that Has Soft TopHey Cheryl, on a vehicle with a soft top like your 2009 Jeep Wrangler you'd need to attach magnetic lights like the part # C6304 to the bumper of since that's where metal would be.
view full answer... - Can the MaxxTow Magnetic Tow Lights Be Hardwired Directly to a Tow VehicleThe MaxxTow Magnetic Tow Lights part # C6304 are designed to be placed on a towed vehicle and then powered using a four way trailer connector on a tow vehicle. The four way trailer connector on the tow vehicle is then likely ran through an integrated trailer lighting circuit which contains fuses, relays, and power from the battery. If you wanted to wire the MaxxTow Magnetic Tow Lights directly to the towed vehicle then you could use pretty much any standard automotive relay and switch...
view full answer... - Parts Needed To Flat Tow a 2002 Honda CR-V To Transfer Vehicle for ServiceYes, you can flat tow your 2002 Honda CR-V behind your F-150 using either the Blue Ox Acclaim Non-Binding Tow Bar # BX4330 or the Blue Ox Adventurer Adjustable Tow Bar # BX7322. You will need the Blue Ox Base Plate Kit # BX2232 to give yourself the attachment points needed for connecting the tow bars. You will want to also check your local laws to verify if you are going to need a Braking System # HM39494 due to the weight of your CR-V. This would also help to reduce wear and tear on...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Leah B
Video Edited:
Zack K
Video Edited:
Dustin K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Installed by:
Bradley B
Written by:
Rachelle B
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Daron K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John K.
1/15/2018
Still works great. Save us on a trip when the car to RV connection went [bad].