Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
(601 reviews)
Price: $217.20
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
Item # LC432690
Retail:$246.32
Our Price: $217.20
You Save: $29.12
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (601)
- Q & A (0)
- Photos
Lippert RV Steps - LC432690
- Towable Camper
- Pull-Out Step
- 3 Steps
- No Ground Contact
- 9 Inch Drop/Rise
- 25 Inch Wide Step
- 27-1/2 Inch Wide
- Steel
- Lippert
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Grab handle eases use and keeps hands clear of moving parts
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 31" - 34"
- Step dimensions: 25-1/2" wide x 8-1/4" deep
- Mounting bracket dimensions: 27-1/2" wide x 16" tall x 12" deep
- Drop/Rise: 9"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432690 Lippert Components (LCI) Triple Radius Entry Step
Similar to Hickory Springs 993240RFXWC2
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Arrived Damaged
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs - LC432690
Average Customer Rating: 4.8 out of 5 stars (601 Customer Reviews)
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Marty S06/30/2022
Perfect replacement steps for my OEM steps that got damaged beyond repair. High quality just like the original...mounting holes lined up perfectly. An absolutely outstanding purchase experience with etrailer.com. I was pleasantly surprised how fast I received them. Order placed on 6/26...shipped on 6/28...delivered on 6/30. The entire experience far exceeded my expectations.
by: Joshua12/31/2023
Amazing!!! Bought a 2018 Keystone 2 weeks ago and the only issue with super deal I got was the RV stairs. Old owner hit the deck with it on one of their camping trips… the stairs would barely come out, the outrigger bracket was bent as well, with a little cosmetic damage to the flashing fender. I watch some YouTube videos on how to measure, this site was the easiest to understand for ordering and best price. Got it super quick and installed it today. I installed by myself laying on the ground and pushing the stairs up. Love the new steps!!!
by: James 03/26/2024
Replaced the rv steps on our fifth wheel and it took about an hour to accomplish. The replacement steps fit perfectly with no modifications needed which was a relief. Since they were kind of heavy I first put blocks under both sides of the new steps to get them off the ground then slid a jack underneath to lift them into position to install the bolts. Happy with the replacement steps.
by: Mike 03/23/2024
Worked perfectly. Excellent quality and stability. Similar to what came on our camper originally. Someone had removed and replaced with one that folds up and block the entry. We much prefer this style of rv step.
by: Al03/09/2024
Exact fit for my 2012 Tracer Touring Edition. Easy to replace once lined up. Used a small floor jack to raise and align. Step unit heavy for one person installaion. Four bolts and your done.
by: Larry 08/23/2022
One year later and the steps are still working great! Perfect fit and replacement, just remember to take care of it for what it is, basically an item exposed to all the elements and will catch the road dirt and grime your tires may kick up. Wash it down occasionally and keep the pivot points lubed with a dry lubricant so it doesn't collect dirt and grime and it should serve you well.
Larry
8/24/2023
One year later and still working like day one. Put em up and out of the elements when storing for long periods helps to reduce the need for lube.
by: Dan 03/18/2024
Excellent ordering and shipping process, super fast. Will continue to purchase trailer parts from them.
by: Don 05/08/2024
the steps were a perfect replacement for the original
by: Sandra 01/03/2024
My son said installation was easy.
by: Jeff02/15/2019
I stupidly backed my wife's car into the steps of our 5th wheel, damaging them. I looked on-line and found a replacement for the steps, perfectly described and with measurements and pictures so I knew they were the right ones. And at a great price, less than that big box Camping place - with free shipping. I ordered them and promptly got an email from George J. in customer service advising that the order had been received and shipped, giving me a tracking link and his own email address and a phone number to contact him with any questions. The steps arrived in perfect condition within 6 days at which time I received another email from Carol C. advising that the steps had been reported as delivered and to contact her with any questions, giving her email and phone number. Now this is great customer service!! And I have beautiful new entry steps too.
by: Susan 07/23/2018
We could not be more pleased with our steps! They are well built and the fold-up (and easy pull-down) feature is a must for our use. Great customer service, we were surprised at how quickly we received our order. We would gladly do business with these folks again!
Susan U.
7/23/2019
Our Lippert pull-out steps have been in use for one year and they are still going strong! We could not be more pleased with them!
by: Brian 04/24/2024
Great service and super quick delivery and great prices.Thankyou so much for being awesome! Will definitely order from you guys again.
by: Steve D04/09/2022
I received my order quickly but the box was damaged and some paint on the steps was damaged. I informed etrailer and they issued me a small credit to buy some paint. The steps fit my fifth wheel perfectly but they are definitely a lighter guage of metal tham my original steps. The installation was not difficult and the fit was excellent so I would recommend this company
by: Robert 08/15/2018
These steps operate much easier than the original ones that came with the trailer. They are well made - good quality steps!
It took me about 3.0 hours to install the steps. I did not order the outriggers so I used the old brackets off of my original steps. To remove the old bracket from my existing steps, I used a disk grinder to grind off the head of the pin. I drilled/enlarged the exiting holes (six total) in the new steps to 3/8 inch to match the size of the bolts that secured the existing steps. Attached are pictures of the brackets that I removed from my existing steps and the bracket complete installation.
by: Roger 05/04/2024
great, arrived on time and in good cond ition.
by: Robert04/24/2024
Delivered quickly and just as described.
by: Adam 04/14/2024
Fit perfect already installed. Great customer service and support !
by: Ron05/08/2023
The steps are perfect and an exact replacement. Much of my approval of e-Trailer is because they shipped the wrong steps initially but when notified they immediately shipped the correct steps and provided return shipping. The return process was as smooth as was possible. Great customer service.
by: Steve 10/11/2022
Exactly what I wanted. Very quick shipp ing
Steve
10/12/2023
Working very well.
Mike L.
11/3/2023
@Steve Awesome, good to hear that!
by: Dana 12/14/2023
fit perfectly and works well
by: Mike08/28/2018
You guys a amazing, bought it Saturday, received it Tuesday, that’s what I like! and it’s factory fit! After I did the screw up, and bent the steps I didn’t think I could get some steps in Time for my next trip, Thanks!
Mike
8/28/2019
The steps are great, I think they’ll last many years!
by: Don 01/09/2024
Just what I expected. Thanks
by: Brent 11/19/2023
Works Great!
by: Bob T10/23/2017
Great products, great pricing and fast shipping. Thanks etrailer.com
by: Robert 11/22/2023
Very well satisfied with the service and product I give the product a 5 star, thank y'all very much
25
600
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Can the Lippert Manual Pull-Out Step Be Taken Apart and Re-PaintedThere aren't instructions for the Lippert Manual Pull-Out Steps # LC432690 to be disassembled, but there isn't any reason why you couldn't take them apart for re-painting. It does look like some of the parts are riveted and not bolted, so you may not be able to completely disassemble.
view full answer... - Replacement Pull Out 3-Step Recommendation for 2017 Grand Design 303RLSI pulled up pictures of your Grand Design 303RLS and it looks to have a pull out style 3-step on it so for a replacement that will be as cost-effective as possible the part # LC432690 would be what you'd want. This can either bolt or weld to the frame of your trailer. If your outriggers are 25.5 inches apart you'd have to move them out 2 inches for these to bolt in their place.
view full answer... - Will Lippert Manual Pull-Out Step LC432690 Fit StarCraft 14RT Pop UpIf the mounting bracket width you have is 25.5 inches like you mentioned the # LC432690 that you referenced would be what you'd need. This would match up to that perfectly and would put the lowest step 25 inches from the RV frame.
view full answer... - Pull Out Step Recommendation for Horse Trailer That Has 26 inch Tall HeightThe best option would be a fold out step setup for your horse trailer where you need a height of 26 inches. The Lippert manual pull out step part # LC432690 would be a fantastic option. When it's out you have 25 inches from the mounting bracket to the bottom step. To mount these you'll also want the outriggers part # LC301704.
view full answer...
- Can the Lippert Manual Pull-Out Step for RVs LC432690 Be Used To Replace 24" Wide StepsIn regards to selecting the correct set of pull-out steps for a trailer, the most important dimensions to verify are mounting bracket width and entry height. If these two metrics are correct then you need not worry about the step width although this is correlated to the mounting bracket width. The Lippert Manual Pull-Out Step for RVs part # LC432690 has a 27-1/2" wide mounting brackets with an entry height of 25" so if these both work for you then the step width of 25-1/2" won't matter.
view full answer... - Which Torklift GlowStep Set Would Work Best on Doorway Height of RV that is 40 inchesThanks for the pictures of your steps on your RV. Right now it looks like you have the Lippert Manual Pull Out Steps part # LC432690. So for a similar Torklift GlowStep setup that would match the threshold height you have now of 40 inches you'd be best off with the 5-step part # TLA9105 which has a entry height range of between 34-7/8" to 42-3/8".
view full answer... - How to Determine if Lippert Triple Pull-Out Steps Fit TrailerThe Lippert Manual Pull-Out Step for RVs - Triple # LC432690 might work for your Keystone trailer, but we do not have a database of each part put on each year, make and model of trailer. To find out if these steps will work, you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting bracket to fit. These steps have mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. Otherwise, you will need to use the Outriggers for...
view full answer... - Could Manual Pull-Out Steps # LC432690 Fit 2010 Grey Wolf Super LiteThe Manual Pull-Out Steps # LC432690 are designed to fit the standard mounting brackets found on RVs like your 2010 Grey Wolf Super Lite by Cherokee. That said, there are sometimes variances in the widths of the brackets typically based on the number of steps on the assembly. This setup is designed to fit mounting bracket dimensions that are 27-1/2 inches wide outside to outside. Most likely that's what you have but worst case scenario you could weld these directly to your frame, have the...
view full answer... - Will Manual Pull-Out Steps # LC432690 Fit 2008 Jayco Jay Flight 30 BHSYes, the Manual Pull-Out Steps # LC432690 that you referenced will fit your 2008 Jayco JayFlight 30 BHS. The great thing about RV steps is that they can basically fit any RV since the install brackets can be moved, the steps can be welded directly to the RV, or you can install new brackets with the Outriggers # LC301704.
view full answer... - Will Lippert LC43290 Pull Out Steps fit 2006 Keystone Outback 30 ftFor your Keystone the step part # LC432690 will fit but it may require some fabrication. It sounds like your steps use different mounting dimensions that these so what you would need is new outriggers part # LC301704 as well so that you can install compatible mounting brackets.
view full answer... - How Much Does the Lippert Manual Pull-Out Step for RVs # LC432690 WeighThe shipping weight of the Lippert Manual Pull-Out Step for RVs # LC432690 that you referenced is 60 lbs. If we knock off a few pounds for the packaging that will leave you with about 57 lbs.
view full answer... - Replacement Manual 3-Step Assembly for 2011 KZ Sportsmen 290 Travel TrailerWe carry a wide range of replacement RV and trailer step assemblies and these are offered in several sizes and step counts. Based on my research the 2011 KZ Sportsmen 290 travel trailer comes fitted with a 3-step manual unit, one like # LC432690 from Lippert. You can view all of our RV 3-step options on the linked page. The dimensions you provided are useful but the key is to match up the mounting hole spacing. The step unit I referenced has mounting base dimensions of 27-1/2 wide x 9-1/2...
view full answer...
- Is There a 3 Step RV Pull Out Step that Can Replace LC432682There are 3 step pull out kits similar to the # LC432682 that you referenced but they are wider across the board so the exact mounting hardware you are using now won't work. The part # LC432690 would be a great solution for what you have but it's 27-1/2 inches wide and what you have now is 2 inches narrower. For new brackets you'd also want the part # LC301704.
view full answer... - Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- Correct Pull Out Steps For 25.5" Mounting Bracket Width I spoke with the manufacturer to ensure the measurements were correct and found that the chart on the page for # LC432690 is incorrect. It does require 27-1/2" of space for the mounting brackets. Both the # LC432690 and # LC432696 will be too big to fit your campers dimensions. TorkLift offers some options with a 25-1/2" mounting width: For a 18-1/2" - 28" entry height you'll want the TorkLift Glow Step # TLA8102. For a 25-1/2" - 36" entry height you'll want the TorkLift Gow Step # TLA8103. For...
view full answer... - RV 3-Step Entry Steps Needed for a 2018 Forest River Sandstorm ToyhaulerI do have a solution for you to add a 3-step system to your 2018 Forest River Sandstorm Toyhauler but you will need to install Outriggers # LC301704 to go with more steps as the 3-step options are slightly wider. If you decide to go this route then I recommend going with the Lippert Manual Pull-Out Step # LC432690. This kit has a 300 lb weight capacity and has mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. We also have portable steps like the Aluminum # SASXL-08C-Y...
view full answer... - 4-Step Manual RV Step Upgrade for 2015 Forest River Blue Ridge 5th WheelThe OEM step supplied on a 2015 Forest River Blue Ridge 5th wheel is the type that does not contact the ground. To replace your 3-step like this with a 4-step unit I suggest the Flexco Manual Pull-Out Steps for RVs # SMFP-4400. These are designed to bolt on in place of the OEM steps on most RVs. Note this unit has slightly larger bracket dimensions of 28-1/8" wide x 18-1/2" tall x 12" deep. Depending on the brand and model of step unit that was originally installed you may need to use Outriggers...
view full answer... - RV Step Mounting Measurements to Confirm a Fit and Work Around OptionDo you need the mounting base to be 26 inches wide, or the mounting hole locations 26 wide? If this is just an approximation, we have the Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432690 that have a mounting base of 27-1/2 inches wide with mounting holes at 26-3/8 inches. If you can't find the exact mounting hole locations, then I recommend the Lippert Outriggers for Manual RV Steps # LC301704 These will allow you to change the mounting...
view full answer... - Mounting Measurements for Lippert Manual Pull-Out Step LC432690For Lippert Manual Pull-Out Step # LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other measurements.
view full answer...
- Replacing Auto Steps With Manual Steps on Forest River RVThe steps you need are going to depend on some measurements you'll need to take; as for the installation, each of these can be either bolted on or you can have a professional weld them on. The right step for you is going to depend on the amount of length you have from your doorway to the ground, as well as your current mounting base dimensions, which need to match up in order to get a secure fit. The Lippert Manual Pull-Out 2 step # LC432682 has mounting base dimensions of 25-1/4" wide...
view full answer... - Could Lippert RV Steps LC432690 Fit 2019 Keystone Outback 260UMLMost likely yes but I don't have a way to verify what steps would fit your 2019 Keystone Outback 260UML. The Lippert Steps part # LC432690 do fit most standard RV step areas. The mounting bracket is 27-1/2 inches wide so you would want to verify you have the correct width to fit these.
view full answer... - RV Roof Vent Lid Replacement for Atwood Fridge and Step Set for 2013 Keystone Passport 2650Hey Ken, we have verified in the pas that the Camco RV fridge vent cover part # CAM42163 works with the Atwood fridges like what you have and is black in color. The Lippert steps part # LC432690 that you referenced would also work great as a replacement step setup as well. This matches the dimensions you need and would work great.
view full answer... - Recommended Pull Out Steps For A 2017 Coachmen Apex 275BHSSBased on the measurements you provided me the Lippert Manual Pull-Out Step for RVs # LC432690 would not fit the entry height of your camper so instead you'll need the Lippert Manual Pull-Out Step for RVs # LC432687. These steps can easily bolt right up into your frame and has a rust-resistant black powder coating.
view full answer... - Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Updated by:
Leah B
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Marty S.
7/2/2023
After one year, I am thoroughly pleased with this purchase. I should have added to my original review that using a motorcycle jack to lift these into mounting position made installation super easy!