T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(311 reviews)
Price: $76.46
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118566
Retail:$112.03
Our Price: $76.46
You Save: 32%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (311)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118566
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118566 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2016 Ford Escape
- 2013 - 2016 Ford Escape without factory tow package
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118566
Average Customer Rating: 4.6 out of 5 stars (311 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Adam04/06/2024
2016 Ford Escape
Plug and play harness made install very simple. Only other wiring required was routing wire to battery. Good product, well worth the money
by: Charles04/22/2023
I had no problems self installing the harness. The harness works perfectly with my trailer / 2015 Ford Escape Titanium.
by: Barry 08/26/2023
They were a great product and installation was pretty easy. I was able to install the receiver by myself with the help of a good floor jack. The only problem I had with the wiring harness was trying to fish it up between the quarter panel into where it connects to the light was pretty tight but got it accomplished. Thank you.
by: Kirt P.09/03/2017
2014 Ford Escape
Overall, the hitch is robust and installed properly. The final fit to the vehicle is perfect. There is proper clearance to the bumper and exhaust. Aside from having to slightly bend one area of the mounting to make installation possible everything went as planned. The installation instructions for the hitch and wiring kit were correct and helpful. The method provided to fish the fasteners thru the frame rails is awesome. The vehicle wiring kit was very well made and thought out. The fit and connections were perfect.
Pic # 1 Side plates that fit over outsides of frame rails were not to spec at the front. The inside dimension was 39.75". The frame rails are 40.50 outside to outside. The front of the plates required some bending before installation.
Pic # 2 I welded a 1/4" thick plate to an old Floor Jack to lift the hitch into place because I had no help. I then bolted the hitch to the plate.
Pic # 3 Another view of the hitch mounted to the plate.
Pic # 4 Shows the 2014 Escape on Jack Stands with about 2" clear under tires. Also shows how I set the hitch onto the floor jack using an overhead hoist.
Pic # 5 Shows how to attach chains to the hitch for lifting with a hoist or chain fall.
by: Hardy04/22/2017
2014 Ford Escape
After reviewing the installation video my son and I installed the 75758 hitch and 118566 wiring harness on my 2014 Ford Escape. The install was very easy. Others review that stated to install the wiring harness first was spot on. That made installing the harness much easier. I am very pleased with how the hitch is only slightly visible.
by: Larry W.11/07/2014
2014 Ford Escape
I was very impressed with quality of your service and the wiring harness. It was at my house in four days.
It took me a few hours to install but I had to remove some very ugly wiring done by a dealer, your product was a very clean install.
by: Chuck S04/22/2017
2014 Ford Escape
Hitch was as described. The installation went well and I was working alone so I had to use a jack to help get the hitch into position.
Hitch looks good and will work well with my Kuat Bike rack and Holmes Trailer.
Thanks,
Chuck
by: Phillip 02/06/2024
Works great! Was fairly easy to install.
by: Ricky09/22/2023
This is a replacement, first one lasted 3 years. Kind of too pricey for me but what are you going to do if you need it.
by: Christine02/20/2018
Ford Escape
Best made trailer hitch on the market today, I put this trailer hitch on myself with the video on my iPad (easy step by step instructions). Took me a couple of hours to install hitch and wiring harness. Loved how it tucked up under my Ford Escape and all you see is the receiver end of the hitch. Use it today to haul a utility trailer and boat to my favourite fishing holes. Best value for a well built hitch. Thanks e-trailers for the speedy shipping (free by the way) and great product. Have recommended your product to everyone that asked where I got the hitch from. Thanks again. I am sure your product will last longer than this vehicle, and I know I will definitely order your product on my up and coming vehicle purchases.
by: Sharon06/06/2018
2015 Nissan Frontier
Everyone at Etrailer was extremely helpful and quickly let me know about the hitch that was on back order, and offered other solutions. I was set on this particular hitch (and was able to find it elsewhere), but Dena was very nice about changing my order to just the wiring harness and the ball mount kit. They arrived quickly, and all of the parts were were there, for a seamless install. A great company to work with, and I expect that I'll be ordering from them again. Thank-you!!
by: Dan H04/27/2015
Overall, this worked well and I probably saved myself $300-$400 over what the dealer would have charged. The driver side (yellow) wire setup was shorter than I would have liked. I didn't measure it, but it was so short it left me only one location to install the controller box. I would have preferred to put it somewhere else, but I was limited because that config was so short. The video that goes with this harness was very helpful, but as with everything, it's a lot harder to do that it looks. Routing the connectors up through the rear paneling was a challenge. The connectors are pretty big (they have to be) and the places to push them through are pretty small. Then, routing the power wire from the rear up to the battery while keeping it out of the way of the wheels, shocks, springs, and exhaust was another big challenge. It can be done, but give yourself some time to think it through and come up with a plan. Overall, I'd do this again. I'd rather save a few hundred and just deal with a little aggravation. I'm going to buy another harness from them soon for a different vehicle. Great company to deal with.
Dan H.
4/28/2016
Still solid - and often drive for miles on a gravel road
by: Pierre 04/14/2023
2014 Ford Escape
The unit is excellent, Except that the wires for the left turn and brake are to short , could use 6 more inches of length, plus the tape that secures the unit to the truck is not good, does not hold.
by: John M08/24/2016
2016 Ford Escape
Great product - it would have been easier to install the wiring first and then the hitch. The installation video is priceless. Having access to a car lift will greatly speed up the process, I had to crawl around on the cement under my Escape with the front end up on ramps - slow going and painful getting up and down. Also having a SMALL power drill will make working in tight space a lot easier to drill and mount the ground wire. System is up and working perfectly on first try!
John M.
11/1/2017
Everything is working well. I have had no problems or complaints. Although the hitch blocks the tailgate hands-free sensors on the Escape, I can still find several spots that will still allow hands-free operation of the tailgate even with the hitch installed. As always, you have provided excellent products that work as advertised and installed without modification!
by: Joe S.01/30/2014
2013 Ford Escape
I found the directions for the T-One Wiring Harness installation to be pretty inadequate. And, the short hot wire from the transformer made it virtually impossible to attach the transformer anyplace that was recommended or with the wire side "down" as instructed. So, it's hanging free behind the muffler. And I had to take it to a trailer shop to get someone to make a working "ground". All in all, disappointing. Another 10 inches of wire would have saved me hours of sweat and frustration.
Joe S.
1/30/2015
After the hassle to get the wiring installed, it has worked satisfactorily, with no problems.
by: ken e.05/17/2017
2014 Ford Escape
Haven't had the chance to try it out yet, but, Installation sure wasn't as easy as the instructions led me to believe. I ended up having my mechanic do it and he had to remove the rear bumper to feed the wiring harness out of the Escape. he also had to route a separate power line from the battery. This ended up costing me more than the hitch and the harness combined. Sure hope it holds up.
Ken E.
5/17/2018
Well, its a year later and spring is here. After cleaning the green corrosion off the contacts every thing is fine. The cover isnt as protective as I thought it would be. Just like all electrical devices this one needs maintenance. Still working though and that a good sign.
by: Dwayne11/01/2017
I installed the wiring harness months ago and finally used it recently when pulling my boat. The directions for installing the harness (I followed the videos etrailer had available online and the available Instruction document) were easy to follow and made installation easy and it works great.
Dwayne
11/1/2018
Have used it numerous times in the last year. No issues - works great.
by: Rachel B08/15/2016
2013 Ford Escape
Harness was pretty easy to install until you get to the power wire that goes to the battery. I installed it on my 2013 Ford Escape and there was not many good places to mount the wire (had to drill a few holes to zip tie). Not a fault of the harness! Other than that, very well made, nice plug and play.
Rachel B.
11/3/2017
Both products are still working great. Im still very satisfied with the hitch and wiring. Thank you.
by: David 12/01/2022
The installation was easy! The receiver is made well and the wiring kit made the installation process a piece of cake.
by: Don M.09/20/2016
2016 Ford Escape
Hitch and wiring harness installed very easy,thanks to the u tube video,great products,received very quickly,paint looks like it will hold up on hitch.very happy with both products.
Don M.
9/23/2017
No problems
by: Andrew04/21/2019
2016 Ford Escape
Hitch for 2016 Escape. Very easy install did not require modifications to exhaust. Toughest part was running wiring to battery mid-way under car. Video showing install was very helpful - how to best fish wires through subframe.
Andrew
4/22/2020
Works as designed. Easy install. Good hitch.
by: Paul W.10/06/2017
2013 Ford Escape
Great product, easy to work with and good installation instructions. The hardest part of the whole process was getting the tail lights out without breaking them.
Paul W.
10/8/2018
I dont owe the vehicle any longer but the product performed very well. Thanks for checking back with me. You guys run an excellent business. One of the best Ive encountered on the web.
by: James C.09/26/2015
The trailer hitch and wiring harnesses are of high quality. The videos they offer to watch made installation a breeze. Shipping was very fast. Thanks
James C.
9/25/2016
No problems at all
by: Jonathon K07/19/2019
So I installed this kit on my 2014 Ford Escape St, the module keeps blowing out, and I keep on having to replace the module in order to get full functionality back to my trailer lighting.
Mike L.
7/22/2019
If youre losing multiple taillight converter harnesses, typical cause is a short circuit somewhere in the trailer wiring itself. Trace each circuit rearward from the trailer connector back to its lamp. Look for loose connections or pinched wires or cracked and worn wire insulation. Anything that would allow the bare copper inside the wiring to short out to the trailer frame. Once the short is located and repaired, you should stop continually needing to replace the taillight wiring harnesses. Ill link you some wiring help articles that you might find helpful.
by: Kevin G08/06/2017
2014 Ford Escape
2014 Escape. My Escape has a fuse box in rear cargo area. This box has a trailer accessories terminal F27 I believe. Ran hot wire to this rather than up front (much easier) works fabulous. Couldn't be more pleased with product and install video on Youtube.
Heather A.
8/17/2017
Just a quick note, we recommend running the hot lead straight to the positive side of the battery, to avoid overloading your electrical system.
25
311
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Does Draw-Tite Trailer Hitch for 2013 Ford Escape S Model, Part # 75758, Fit with Dual ExhaustThis trailer hitch is compatible with the 2013 Escape S model with factory dual exhaust. If you have an aftermarket exhaust installed, or if you have aftermarket or dealer installed exhaust tips that point downward, there could be a compatibility issue. Please note that if your vehicle has the Hands-Free Lift Gate option, addition of virtually any hitch will reduce the effective operating area for the lift gate sensors. With this hitch installed the operating area for the lift gate sensors...
view full answer... - Shorelandr SRV55TBB Trailer Brake Rotor or Wheel Stud ReplacementI have no way of looking up which studs were used on your trailer, but if you can drive out one of the studs and provide the dimensions shown in the provided diagram, I'd be happy to recommend a replacement. I did find a few specs online for your Shorelandr trailer, it looks like it uses tandem 3500 lb axles which would have an inner L68149 and an outer L44649 wheel bearing and a 5 on 4-1/2 inch wheel bolt pattern. If that's the case, you could use a # KHR10D replacement hub/rotor which...
view full answer...
- Trailer Wiring Harness Recommendation for 2013 Ford Escape TitaniumFor your 2013 Ford Escape the trailer wiring harness I recommend is the Tekonsha part # 118566 as it's the easiest to install and most reliable. I attached an install video for this on a similar Escape for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,...
view full answer... - Troubleshooting 4-Pole Trailer Wiring Harness After 18-Months of UseThe Tow Ready T-One wiring harness you referenced, part # 118566, is indeed very similar to the 4-pole wiring harness you purchased from etrailer in October 2013, which is a part from Curt. Thank you for that purchase and also for your hitch purchase. A 4-pole wiring harness such as what you have carries power only for the trailer's stop, turn and taillights. The problem you are having with all trailer lights staying on continuously once the trailer is plugged in to the Escape suggests...
view full answer...
- Best Hitch and Wiring for a 2014 Ford Escape TitaniumI've got a great solution for you! For the hitch use etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part # e98866 . It covers you right up to your weight ratings of the Escape. It also has a matte black finish as compared to the high gloss on the others which will blend in better with your vehicle. For wiring use the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118566 this is custom fit for your Escape and requires...
view full answer... - Parts Needed to Tow Boat Trailer with 2016 Ford Escape The Curt Class III Trailer Hitch # C13186 that you referenced is confirmed to fit your 2016 Ford Escape and has a 3,500 pound towing capacity so the hitch itself is up to the task of pulling an aluminum boat trailer that weighs under 3,000 pounds. You will still need to verify the capacity of the vehicle itself, which you can find listed in your copy of the owner's manual or by contacting a local Ford dealer with your VIN. It looks like this capacity can vary quite a bit depending on if...
view full answer... - Will Draw-Tite Trailer Hitch 36529 Fit a 2013 Ford Escape with Hands-Free Lift GateThe Hands-free liftgate on your 2013 Ford Escape will work with Draw-Tite trailer hitch # 36529 installed. To complete the towing set up I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring use # 118566. I have linked instructions for the wiring as well.
view full answer... - Can New 4-Way be Spliced Onto Trailer Wiring Harness 118566 on 2015 Ford EscapeYes, you can splice in a new 4-Way flat vehicle end, such as # HM48190. This vehicle-side 4-Way also has LED test lights so its easy to determine if one of the circuits isn't working. Or for a regular short-length harness you can use # 18252.
view full answer... - Trailer Hitch Recommendation for a 2014 Ford EscapeThe etrailer.com Ball Mount Kit part # 989900 does not include a wrench to tighten the hitch ball down. For a wrench to go with this kit you would want the part # C20001. For a trailer hitch the part # 75758 that you referenced would be the correct hitch to use. I attached an install video for you to check out as well. For trailer wiring you would want the part # 118566.
view full answer... - Installation Instructions for Wiring Harness C59496 on a 2014 Ford EscapeTrailer wiring harness # C59496 fits many vehicles so there are no vehicle specific instructions for each vehicle that it fits. But the process for installation is the same on all vehicles. You have to use the included circuit tester to test the vehicle wiring to make the proper connections to the harness. I have linked the installation instructions near the bottom of the page for you. Another option is to use a T-connector, # 118566, which plugs in line between the vehicle taillight...
view full answer... - How to Install Trailer Wiring Harness in 2015 Ford EscapeYou will want to use a pull wire to help get the harness up through the bottom of the vehicle. If you check out the install video I attached you can see how our installer did it.
view full answer... - Options for Carrying 2 Kayaks that Weigh 145 lbs with a 2013 Ford EscapeAccording to the owners manual for the 2013 Ford Escape, the maximum weight capacity of a roof rack for models without the moon roof is 100 lbs and 45 lbs for models with a moon roof. As you stated, the Yakima RailGrab roof rack has a weight capacity of 165 lbs, however, the weight capacity will be limited to the 100 lb weight capacity of the factory side rails on the Escape. I would not recommend carrying both kayaks together with your Ford Escape because it could potentially damage the...
view full answer... - Adding a 7-Way Trailer Connector and Brake Controller to a 2013 Ford Escape with 4-Way ConnectorTo add a 7-Way trailer connector to your 2013 Ford Escape with a factory 4-Way you will need # ETBC7. This will provide the 7-Way and the wiring/accessories needed to install a brake controller. It also includes the wiring and accessories needed for the 12 volt circuit. For a brake controller I recommend the P2, # 90885, because it is easy to set up and use and it is reliable. I have included some links that show and explain the ETBC7 installation for you.
view full answer... - Trailer Wiring Recommend for 2016 Ford Escape Allow Lighted Hitch Cover to Work w Out Error MessageYour best option at this point is going to be to install an aftermarket 4-way like part # 118566. I know that seems like a silly option since you have a 4-way already. But installing a new 4-way will bypass all of the taillight sensors and will allow you to use a lighted hitch cover like the # FHG72VR without issue. The # C35FR does not have a 4-way to 4-way equivalent either.
view full answer... - Trailer Hitch With Hidden Crosstube For 2016 Ford Escape That Does Not Require Cutting BumperWe do have exactly what you are wanting - a trailer hitch receiver for your 2016 Ford Escape that does uses the existing holes, has a completely concealed crosstube, and does not require you to cut your rear bumper whatsoever. The hitch that fits is from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75782 I have added a photo of the # 75782 installed on a '16 Escape so you can see that it has a hidden crosstube and only the receiver shows. This hitch also has the best ground...
view full answer...
- Will Tow Ready T-One Wiring Harness Work With LED Trailer LightsThe Tow Ready T-One Wiring Harness # 118566 will work with LED lights on your trailer. LED lights pull a fraction of the amperage of incandescent bulb lights, so all of our 4-way wiring harnesses work with LED trailer lights. This wiring harness will plug directly into the existing wiring system of your 2013 Ford Escape, and only require the power wire to be routed to the vehicle's battery. I have included an installation video of this wiring harness on a 2013 Ford Escape.
view full answer... - Troubleshooting Trailer Wiring 4-Way that Has Voltage on All PinsIt really sounds like the converter box of the # C56164 has shorted out. You can test this to be sure though. What you will want to do is test the wires going into the box of the converter box for voltage with a circuit tester like the # PTW2993 to see if there is voltage going into the box when the taillight functions of your vehicle are applied, and then test the output side of the box to see if the current is making it through the converter. If not then the problem is that the converter...
view full answer... - Towing Capacity of 2015 Ford Escape Titanium with 2.0 Liter TurboI looked up the towing capacity of your 2015 Ford Escape Titanium 2.0 Turbo and it has a capacity of 3,500 lbs so a 1,900 lb boat and trailer wouldn't be an issue at all. The factory trailer anti-sway feature that your vehicle lacks is not something you have to have. You'll do just fine without it. For a hitch I recommend the Draw Tite # 75782 that you referenced because it has the same towing capacity as your vehicle at 3,500 lbs, has a 2 inch opening, and has a concealed crosstube which...
view full answer...
- Ground Clearance Concerns with a Trailer Hitch Installed on a 2014 Ford EscapeOn the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 75758 for your 2014 Ford Escape the distance from the ground to the bottom of the receiver is about 12 inches. But like you said on the sides the hitch sticks down further, at least another inch. But the locations where the hitch hangs the lowest are also further forward on the vehicle so the vehicle would have to be transitioning from level ground to a very steep incline for the hitch to make contact with the ground. Since ground...
view full answer... - Aftermarket Trailer Wiring Recommendation for a 2014 Ford Escape to Bypass Factory WiringIf you wanted to bypass the Ford trailer wiring on your 2014 Ford Escape you could pretty easily do that with the Tow Ready wiring harness part # 118566 as it has been confirmed as a fit for your vehicle. I attached an install video. What you described is pretty bizarre. When the lighting is behaving strange you can test the voltage of the 4-way with a circuit tester like part # PTW2993 to see if the vehicle or the trailer is at fault. I attached a video that demonstrates how to do this.
view full answer... - What Is Towing Capacity of 2016 Ford Escape with Draw Tite 1-1/4 inch Trailer HitchIt looks like your 2016 Ford Escape has a towing capacity between 1,500 and 2,000 lbs and the Draw Tite hitch you have installed part # 36529 or # 36524 has a trailer towing capacity of 3,500 lbs. This means your overall towing setup is limited to the capacity of the vehicle which would be lower. You'll have to determine the weight of your trailer and what you plan to carry with it to know if you have the capacity. If you are in need of trailer wiring the Tekonsha kit part # 118566 installs...
view full answer... - Correct T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2017 Ford EscapeThe correct T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2017 Ford Escape is part # 118715, not part # 118566 which is for the older models. Unfortunately, I can't recommend modifying the harness as you would no longer retain any factory warranties. If you want to hardwire I recommend the Vehicle Wiring Harness Kit part # C59496.
view full answer... - Splicing New Taillight Converter Into T-1 Connector on 2013 Ford EscapeYou could use a non-vehicle specific powered converter like # C59496 and splice it into the current t-connector and 12-volt feed. Typically a taillight converter will go bad because of a short in the trailer wiring, so before replacing the converter you'll want to closely examine the wiring on your trailer. Start at the trailer connector and follow each circuit back to the lamps. Look for pinched wires, loose connections, cracked or worn wire insulation-anything that would let the copper...
view full answer... - Class II Hitches Available for 2014 Ford EscapeDraw-Tite offers a very similar hitch with a 1-1/4 inch receiver, part # 36524. If you would prefer a Class II hitch that would be less visible at the rear of the vehicle, you might be interested in the # 36529 or the # 90230 that includes a drawbar. If you will be towing, you will also need the trailer wiring harness, part # 118566 and the appropriately-sized trailer ball, # 19256 for a 1-/78 inch ball or # 19258 for a 2 inch ball. I have linked you to some installation videos you...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Test Fit:
Nicholas E
Test Fit:
David F
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sharon S.
6/15/2019
I recently used my hitchwiring harness and everything went smoothly. Thank-you again!! And this was for a 2013 Ford Escape