Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1
(211 reviews)
Price: $69.91
In Stock
Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1
Item # LC285325
Our Price: $69.91
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (211)
- Q & A (0)
- Photos
Lippert Camper Jacks - LC285325
- Stabilizer Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Scissor Jack
- 4001 - 5000 lbs
- Lippert
- 1 Jack
- 24 Inch Lift
- Bolt-On
- Steel
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 24" as your application requires. The bow-tie base steadies the jack on soft surfaces.
Features:
- Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers
- Bow-tie base keeps the jack steady, even on soft surfaces
- Heavy-gauge steel construction ensures durability and strength
- Black powder coat finish provides protection from rust and corrosion
- Easy bolt-on installation with included hardware
- Crank handle sold separately
Specs:
- Height:
- Collapsed: 4-1/4"
- Extended: 24"
- Lift: 24"
- Collapsed length: 26-3/16"
- Mounting base dimensions: 10-1/4" long x 3-1/4" wide
- Large bolt hole dimensions: 11/16" long x 7/16" wide
- Small bolt hole diameter: 5/16"
- Load capacity: 5,000 lbs
- Maximum capacity at 22" extension: 6,500 lbs
- Quantity: 1 jack
- 90-Day warranty
Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
If you are looking for a safe, durable, and dependable replacement jack for your trailer, this scissor jack is a safe bet. The mounting pattern and overall dimensions are industry standard, which means that it should easily bolt onto your trailer in place of your original jack and function seamlessly with your existing setup. And it is constructed from powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements.
285325 Lippert Components (LCI) Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Arrived Damaged
Customer Reviews
Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1 - LC285325
Average Customer Rating: 4.8 out of 5 stars (211 Customer Reviews)
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 24" as your application requires. The bow-tie base steadies the jack on soft surfaces.by: Roger04/08/2024
It bolted right up, all the mounting holes lined right up and the hardware supplied was the right size.
by: Brian 10/07/2023
These stabilizer jacks were a huge improvement over the cheap stock ones that came on my travel trailer. Better finish, smooth operation, and very strong. I would highly recommend them. E-trailer is my go to source for RV parts and accessories. Great customer service and products.
by: Mark 09/15/2023
Still works good and still looks good after 1 year and several camping trips.
by: Michael06/15/2023
These things make a great trailer jack. A plate on top and your done. Tried
bottle jacks, these are great.
by: Michael06/19/2022
Easy install. Very sturdy. Getting ready to buy 2 more.
by: James07/12/2020
I may have over-bought. The old jack was rusty and damaged, so I measured the length of the screw. The new jack is the same size exactly, but MUCH heavier gauge metal. I had to drill out the existing holes to 5/16" to accommodate the self-tapping screws that came with the new jack. The new screws went in with no trouble.
The new jack adds a couple pounds to my dry weight, but it is very sturdy. I don't expect that I will ever have to replace it. The paint/coating is very smooth and thick.
Jts
7/13/2021
Excellent
by: William 08/11/2023
I need to do the rears the same way!
by: Kurt 09/30/2023
Fast service.
Good solid jack.
by: Russell06/02/2019
I bought this product to replace the original equipment electric LCI stabilizers that came on my 31ft travel trailer as they performed poorly from day one and eventually stopped working all together. I removed the existing stabilizers and installed all four of these in about an hour. I reused the existing holes and hardware. My camper has never been this solid. Couldn't be happier. This is not my first experience with etrailer. I have been buying from them for years. They are up front with availability, have great product knowledge and are very accommodating when I am not so thrilled with a product..........which is not the case with this one, I wish my camper came with these to begin with.
by: James08/17/2022
Would have been nice if there were instructions were included. These were returned items that were resold as new to me. One package had water damage on it.
Brooke M.
8/30/2022
It is not our policy to sell used items as new. I have sent this to our customer service team and they will be in touch with you soon. Thank you for letting us know!
by: Dave07/25/2019
Replaced lighter ones that were just too weak. They seam to be good. I have only used them once so far. More trips coming
Dave
7/26/2020
They are working good. A lot better than factory ones. Glad that I purchased these.
by: Peter 01/26/2023
Great response always on time or better . I have bought many truck upgrade parts from e trailer and I was always treated with professionalism and respect . Thank you
by: Warren02/15/2022
Just finished installing. The bolt holes on trailer frame were not quite perfect for top of stabilizer but I managed to get them tight. Quality seems very nice. I've seen people at RV parks use cordless drill attachment to screw up/down stabilizers but product says warranty void if you do. I believe if you use drill to lower or raise and you get too tight the 26" screw will bend under the pressure. that's what happened to my old stabilizer I suspect by the previous owner. You can't repair these if bent. I would purchase again.
by: Jb12/06/2019
Bought as extra 5th wheel stabilizers. Order arrived a day early and j
ack's work perfectly.
by: John L06/28/2017
The stabilizer jack that I purchased was an Oem replacement for the original which was bent in an accident. Install was simple and works great. Replacement tire cover looks great. Ordering was easy and delivery was fast.
by: Scott 07/19/2020
Received and installed this new jacks this weekend. They are way stronger the the original factory jacks. Looking forward to our first trip this summer. Plan to buy 2 more for the front of the travel trailer.
by: Michael08/26/2022
Average quality rv scissors jack ... hoped for a higher more robust jack but didn't find it.
by: Garvin08/18/2022
Had it under trailer for seven months now and no problems.
by: Austin04/14/2020
Exact replacement of my old Jack that had a bent rod, but now my other ones don't look as nice as this one!
by: Jay H.06/07/2016
Quality seems good. Threads must be finer than original, takes more cranks to move this replacement up or down.
by: Kent 07/10/2021
Etrailer never disappoints. I always get good stuff at a fair price and delivered in a timely manner.
by: Darin 10/07/2019
Received exactly what I expected in very timely manner. Will order here in the future.
Darin J.
10/9/2020
Working fine as it should
by: Tom 10/04/2021
Great quality compared to the stock stabilizers on my camper
by: Lonnie 09/14/2020
a tree root ripped off my jack and mangled it beyond repair. this one is just like my old one only shiny and new!
by: Jason 11/02/2022
Very easy to install, very durable and solve a solution I was having when I back my UTV out
25
211
Show More Reviews
See what our Experts say about this Lippert Camper Jacks
- Mounting Bracket Dimensions For Lippert 24 Inch Stabilizer Scissor JackThe mounting brackets for the scissor jacks we offer do vary. I went to the warehouse and took some measurements of the Lippert Components 24 inch Scissor Jack, part # LC285325. I have attached a photo of the mounting brackets with the dimensions shown. This scissor jack measures 4-5/16 inches tall when fully retracted and 28-5/16 inches when extended. The jack measures 26-13/16 inches long when retracted. I have attached a link to our product page for the scissor jacks we offer.
view full answer...
- What Is The Width Of Base On The Lippert Scissor Stabilizer JackThank you for including your photo. I pulled the Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs # LC285325 from our warehouse and measured across (right over the Stabilizer Jack sticker pictured) and this jack provides the 2-1/4" of width you're looking for. The side surface is definitely flat however you can see from the image that the corners are rounded. Included is a helpful review video for additional information as well.
view full answer...
- Will Lippert Scissor Jack # LC285325 Fit Tristar 5000Yes, since RV scissor jacks like the Lippert # LC285325 are all universally designed this would fit your Tristar 5000.
view full answer... - Can the Lippert Components 24 Install on Both Sides of TrailerThe scissor jack part # LC285325 that you referenced can be installed on the right or left hand side of a trailer. In other words they are ambidextrous. To raise the jack you would turn the handle clockwise, and to lower it counter-clockwise.
view full answer... - Replacement Stabilizer Jack for 2013 Starcraft AR-ONEA 2013 StarCraft AR-ONE will use a Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1 # LC285325. I've attached some measurement in an attached photo to assist. There isn't a direct replacement part number I can look up but this jack is a standard from manufacturers and will work well for your replacement.
view full answer...
- Single Replacement Stabilizer Scissor Jack for 2020 Imagine 2670MK TrailerI can help you determine which single stabilizer jack is the best option for your 2020 Imagine 2670MK, though there isn't a list or any type of database, for example, that has specific replacement parts for trailers. That said, all you really need to know is the amount of travel you need as scissor jacks are universal fits. The best option is likely the 24 inches of lift of the Lippert Scissor Stabilizer Jack # LC285325, which has a 5,000 lb capacity. It also uses a handle (part # LC285324)...
view full answer... - Will Lippert Stabilizer Jacks Fit 2015 Passport UltralightYes, the Lippert Scissor Stabilizer Jack # LC285325 that you referenced will work great on your 2015 Passport UltraLight bunk house. These have 24 inches of height and have a capacity of 5,000 lbs per jack so with four of these your RV would be very stable!
view full answer... - Can Electric Motor be Installed on Lippert Scissor Stabilizer JackAs long as you are able to get the motor to fit the Lippert Scissor Stabilizer Jack # LC285325 I see no problems with doing that. Typically you'd use the Manual Hand Crank # LC285324 to operate the jack which has a 3/4" socket. It would also be worth noting the various dimensions of this stabilizer jack. I have attached some photos to this answer page for you to reference and compare with what you currently have. Please note that this jack is only meant to help stabilize your trailer and...
view full answer...
- What is the Measurement of the Mounting Brackets and Mounting Bolt Space on the Lippert Scissor JackThe inside of the mounting plates on the Lippert Scissor Stabilizer Jack - 24" Lift # LC285325 are 3-1/2 inches wide. As far as the circular mounting bolt spaces from center-to-center, that measurement is 1-1/4 inches. The bolts that you need for those holes need to be 5/16". I went ahead and attached a diagram that shows more dimensions. Note: the width of the plates are in the written description and not shown in the diagram. With that being said, we unfortunately do not carry any other...
view full answer...
- Stabilizer Jacks for 2022 Jayco Jay Flight Travel TrailerI have no way of looking up which stabilizer jacks were used on your Jay Flight travel trailer, as the RV manufacturers don't categorize that information in a way that's easily accessed, but the Lippert # LC285325 offers a high 5000 lb capacity and a maximum lift of 24 inches which fits most needs. The stabilizer is sold individually, so for one on each side, you'll need to order two of them. Another option is a powered stabilizer jack system like the Lippert # LC369774 which provides...
view full answer... - Will Drilling Be Required to Install Lippert Scissor Stabilizer JacksThe Lippert Scissor Stabilizer Jacks # LC285325 mounting plate is designed to be a universal fit that will match most scissor jacks installed at the factory, but it's not necessarily always going to be a perfect match. Unfortunately there is not a mounting bracket available for these jacks and in the event that the holes don't match up to your existing holes you'll need to drill new holes in the trailer frame to match the stabilizers.
view full answer... - Best Stabilizers To Replace Scissor Style Jacks On 2019 Rockwood 2109RS That Rusted I recommend switching to the Ark Drop Down Corner RV Stabilizer Jacks # AR34FR on your 2019 Rockwood 2109S. These use a zinc coating for corrosion resistance which is superior to the powder coat finish used on the Scissor Jacks # LC285325 included with your camper. While these jacks do have a different design they compatible and will make extending the jacks quicker since they will fold down.
view full answer... - Stabilizer Scissor Jack with 5000lb Capacity and 24” Lift For Use With Power DrillI have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack # LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a 3/4" nut. For that reason, I recommend instead going with the Stromberg Carlson # JSC-24-IND which works with a standard 3/4" socket. If you needed a matching socket for this jack, you can use the Ultra-Fab Speed Socket which is an adapter for...
view full answer...
- Where Are the etrailer Scissor Stabilizer Jacks MadeThe majority if not all of the Scissor Stabilizer Jacks like part # TJSC-24 are going to be made overseas. That said, this is not a sign of poor quality because if you look at the reviews you will see a reflection of a quality well made product. If interested, we also have other options with more lift such as ones from Ultra-Fab part # UF48-979006, Lippert part # LC285325, and Stromberg Carlson part # JSC-24-IND.
view full answer... - Stabilizer Jack That Extends 24 Inches For 5th Wheel TrailerWhile there is a stabilizer jack that extends 24 inches, there aren't any swing-down jacks like the # TJ01RT that have that amount of extension. What you can use is an option from Lippert: - Lippert Scissor Stabilizer Jack - 24" Lift # LC285325 This jack has a 5,000 lb capacity as well, which is a far better weight capacity for a 5th wheel trailer than the 650 lbs of the swing-down jack, which is more for smaller travel trailers.
view full answer... - Does Lippert Scissor Stabilizer Jack Have a Capacity at Different HeightsThere is not a specific capacity for the Lippert Scissor Stabilizer Jack # LC285325 at 6 inches to 8 inches high; they simply have a 5,000 lb capacity per the manufacturer. I have added a link to a video review as well of the Lippert Scissor Stabilizer Jack # LC285325.
view full answer... - What Size is the Nut on the Lippert Scissor Stabilizer Jack?You will need a 3/4" socket to operate the Lippert Scissor Stabilizer Jack item # LC285325.
view full answer... - Recommended Replacement Upgrade Stabilizer Jacks for a Winnebago Winnie Drop 170SI have some great stabilizing jack options for a Winnebago Winnie Drop 170S. The factory jacks would have likely been Lippert so in which case we offer the Lippert Scissor Stabilizer Jack part # LC285332 or part # LC285325 for manual or the Lippert Components High-Speed Power Stabilizer Jack part # LC298707 for an upgraded electric option. Winnebago does not actually make the stabilizer jacks, they are outsourced to another company, Lippert Components I believe is the OEM.
view full answer... - Can You Replace the Threaded Rod in the RV Scissor JacksThere are no replacement parts for the trailer scissor jacks, if they are damaged such as the rod being bent then you will simply need to replace the jack for which we have the Lippert Scissor Stabilizer Jack part # LC285325 or part # LC285326 for the pair. The mounting pattern is pretty standard so they should be an easy bolt-on swap for most applications.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Installed by:
Jeff D
Installed by:
Cole B
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Test Fit:
Kevin C
Video by:
Schuyler H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael H.
6/22/2023
Working great after 1 year. We camp often and have had no issues. I will be ordering 2 more to replace the 2 I didn’t last year.