Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
(634 reviews)
Price: $71.70
In Stock
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
Item # TJSCHD-24
Our Price: $71.70
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (634)
- Q & A (0)
- Photos
etrailer Camper Jacks - TJSCHD-24
- Stabilizer Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Scissor Jack
- 4001 - 5000 lbs
- etrailer
- 2 Jacks
- 18-3/4 Inch Lift
- Bolt-On
- Steel
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.
Features:
- Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers
- Bow-tie bases keep the jacks steady, even on soft surfaces
- 8-Hole top plates allow for adjustability when mounting
- Bearing set on crank side extends jack life
- Black powder coat finish resists corrosion
- Handle included
Specs:
- Height:
- Collapsed: 5"
- Extended: 23-3/4"
- Lift: 18-3/4"
- Length: 24-7/8" when fully collapsed
- 26" Long including nut
- Mounting base: 10" long x 3-1/4" wide
- Mounting holes: 5/8" long x 3/8" wide
- Round holes: 5/16" diameter
- Lift capacity: 5,000 lbs
- 2,500 lbs per jack
- Quantity: 2 jacks
Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
TJSC-24 Ram Scissor Stabilizer Jack - 18-3/4" Lift - 5,000 lbs
TJSC-24-HD Crank Handle for etrailer and Ram Scissor Jacks
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2 - TJSCHD-24
Average Customer Rating: 4.8 out of 5 stars (634 Customer Reviews)
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.by: Daniel P12/10/2020
Initial reaction is that this is a great, high-quality product. Only took me 1-1/2 hours to install two (both on the door-side) that had been damaged. Would've been even faster but I needed to modify the bracket that bolts onto the frame for the rear stabilizer. BTW, the two stabilizers had to be replaced because, as a first-time trailer owner, the dealership never told me to NEVER USE YOUR STABILIZERS TO LEVEL YOUR TRAILER! I hope to save at least one other person the hassle and expense of having to replace your stabilizers because you didn't know any better--I know now and will never forget! At least the new stabilizers are higher quality and really weren't difficult to switch out.
by: David 02/25/2024
I am completely satisfied with these. Easy to install and much stronger that the original that came with the trailer.
My only issue is a different style of wrench is needed than my 3 originals so I need to carry two wrenches.
by: James J05/25/2023
Better quality then the original, easy to change.
James J.
5/27/2024
A year later, and still working great, glad I made the change to this.
by: Sharon07/11/2018
Product came when it was suppose to was not difficult to put on the frame You must realize I am a 74 yr old woman and did this by myself. The shocks were for the front of my trailer.
by: Jerry 10/28/2023
These stabilizers are much better built that the ones that came on the trailer. The lift components are sturdy and the screw shaft is bigger diameter.
by: Harry 09/30/2023
Broad range of products with good availability, very affordable pricing, quick delivery and excellent customer service. Thank you etrailer
by: l pace08/03/2023
received 2 stabilizers. just what I needed. works perfect. 10 min. to install
by: Tom08/09/2016
Stablelizers are well constructed,these will add good stability for RV.Also,thanks for quick delivery
Thomas C.
8/9/2017
Stabllizers are very stout were easy to install and good price
by: GaryS_NC08/07/2021
Got our RV out this past week and put the scissor jacks to work. I did not bolt the units to the undercarriage of our RV because it does not have significant ground clearance. Once parked, I placed them under our RV (24' Sprinter Class-C), and they worked great for some additional leveling and stability. Which stopped all rocking motion while moving around in the unit.
Garys_nc
8/14/2022
The scissor jacks still working great. I put a little white grease on the threads every now then just to keep them lubed.
by: David 03/23/2023
My 2nd order from Etrailer. Great quality, great price points, and fast shipping!
by: Mike J06/13/2019
These have stabilized our trailer very nicely. We didn’t feel the need the install these they are freestanding.
by: Tom 09/17/2023
Exactly what I was looking for!
by: William07/09/2018
Product arrived as promised, on time and in excellent condition. I am eighty years young and I have a tough time mounting my luggage rack to my Honda C RV trailer hitch receiver. Thus the need for the scissor stabilizer jacks. I mounted 1 each on the left and right side of the luggage rack, then with the ultra-fab stackable stabilizers, I use at the front under the rack tongue, the other under the back of the rack. Now, when I am ready to load or unload the rack I simply use my 14 volt drill motor with the ultra-fab speed socket power drill adapter to raise or lower the rack to the receiver height and just pull it off or push it into the receiver. Over-kill? Yes. But it serves my needs! The jack handle works great too, but that's work and I'm not used to it. All is well.
by: Michael10/28/2018
As always this product from etrailer was as good as expected. I have a 2015 Jayco 1209 SC Tent Trailer and the jacks that came with it folded like paper when I went to stabilize the trailer (I did not attempt to use them for leveling). I ordered these from etrailer and they came quickly and were perfect. They self tapped onto the frame of the trailer easily and when I used them they leveled the trailer out and stabilized it with such ease.
I would also like to note that even though I can buy trailer products in Canada, when I really need something I need to be a sure thing I always go to etrailer and I am yet to be disappointed.
by: Lee 03/02/2023
Heavy duty product. Well made. Will be.a great addition to my travel trailer
by: James B07/31/2017
We installed these jacks on an older travel trailer that had been using only jack stands for stabilizing. These were simple to install and operate flawlessly.
by: Nicholas03/16/2021
They work just as you would expect. Why not 5 stars? It has to do with the crank handle offset. It is too big. If the jack is completely collapsed then the crank offset hits the ground. You have to extend the jacks a far amount before the offset does not hit the ground while turning.
by: Jim 03/10/2017
great price shipping was fast
Thank You
James R.
3/10/2018
the jacks work much better
by: Dennis10/31/2017
Very pleased. I was replacing 2 stabilizing jacks on camper because feet on old ones rusted and I could not find just feet. Ended up getting 4 because of price and put order over free shipping threshold. Jacks arrived in a very timely manner. Put them on the day I received them. They work perfectly. Thanks. Dennis
by: Martha07/09/2021
We bought this "universal" set for our R-pod. We had to do a lot of retro-fitting to get them to work. They are probably too large for smaller trailers, but I think the quality is fine.
by: David04/10/2018
Fast Delivery. Just what I ordered. Can't wait to install on my travel trailer to stop the rocking. I always use etrailer. The service is always Great and personal. You guys really care. Thanks.
by: Sylvia 04/26/2023
Great product
by: Paul 11/15/2021
I put these on our Winnie View and they really helped stop the rock and roll
by: Timothy 06/28/2021
Using to raise my VW and my Sprinter. Sturdy, solid tools. Good wide base for stability. Recommended
by: William04/27/2018
They worked out great. They arrived quickly and make stabilizing the trailer a breeze.
25
633
Show More Reviews
See what our Experts say about this etrailer Camper Jacks
- Replacing Bent Handle On A Stabilizer JackA bent handle is something that can easily be replaced. Now I am not sure exactly what brand or style of stabilizer jack you have, but if it is just a standard scissor jack we have replacement handles available. For example the handle # JCH-1 will work with the Stromberg Carlson brand scissor jacks. If you are in need of new jacks as well as a handle we have the # TJSCHD-24. This comes with two 2,500 lb scissor jacks and a handle. If you have a different kind of stabilizer jack feel free...
view full answer... - Can Trailer Stabilizer Scissor Jacks be Used to Lift a TrailerScissor jacks for trailers such as # TJSCHD-24 are used for support but not lifting applications. For lifting I recommend using a bottle jack such as # ALL620471 and then using a stabilizer jack to support the trailer at the proper height. Bottle jacks are great since they don't take up a lot of space and still have plenty of capacity.
view full answer...
- How to Determine if Scissor Jack Will Fit CamperThe Scissor Stabilizer Jack # TJSC-24, which also comes in a 2-pack # TJSCHD-24 and a 4-pack # TJSCHD-24-4, is a universal fit so you would need to double check our measurements to ensure they fit your travel trailer. When they are collapsed they measure 5" tall and then they can extend up to 23-3/4" tall to help stabilize your trailer. I am attaching a link to our returns policy that you can reference in regards to your question about a possible return.
view full answer...
- Stabilizing Scissor Jacks to Reduce Rocking in 2017 Winnebago View Class C RVWe can help you with stabilizers to keep your Class C Winnebago View steady when you're at your destination. Class Cs can have a high center of gravity that can make them a bit wobbly so scissor jacks such as # TJSCHD-24 will help. These offer 18-3/4-inches of lift and are rated for 5000-lbs. You can bolt or weld them on to the frame. If you need more lift and/or if you prefer a higher weight capacity then please refer to the linked pages that displays all scissor jacks, some of which...
view full answer... - Will Stabilizer Jack Leg Fit in MaxxTow Adjustable-Height Ball MountI went to take some measurements for you and found the leg of the Square Drop Leg Stabilizer Jack # SJ-R208 measured 1-1/4" outside to outside of the leg itself and 1-1/2" for the mounting bracket. The tube portion of the MaxxTow Adjustable-Height Ball Mount # MT70068 that accepts the ball mount measures about 2-1/2" from outside to outside and 2-1/8" inside to inside. So the stabilizer jack leg would physically fit inside the ball mount; the only issue is that the pull pin from the stabilizer...
view full answer...
- recommended Scissor Jack Replacement For A 2016 Keystone Passport Ultra Lite Grand Touring 2510RBWe have a few different options for your 2016 Keystone Passport Ultra Lite Grand Touring 2510RB Travel Trailer; you'll just need to measure the for the correct lift needed. The Scissor Stabilizer Jacks w/ Handle 5,000lbs - Qty 2 # TJSCHD-24 has a 18-3/4" lift. The Leveling Scissor Jack 5,000lbs # JSC-24-IND has a 24" lift. The Leveling Scissor Jack 5,000lbs # JSC-30-IND has a 30" lift.
view full answer... - What is the Difference Between a Stabilizing Scissor Jack and a Leveling Scissor JackThere is no difference, that is just what the manufacturer decided to label it as. They both do the same job. Both Leveling Scissor Jacks, like part # JSC-24, and Stabilizing Scissor Jacks, like part # TJSCHD-24, are used to keep your RV level and stable. The only thing that you really need to keep an eye on is the weight capacity of each as these kinds of jacks are not meant to lift weight, just to hold it.
view full answer... - Scissor Jacks Compatible With JT Strong Arms On a 16 Travel TrailerI recommend using the etrailer Scissor Jacks # TJSCHD-24on your 16' travel trailer. You will need 2 sets of these 24" jacks to get the 4 you need. They will attach to the JT's Strong Arm Jack Stabilizer Kit # LC191025 with the hardware included in the Strong Arm kit. To operate the jacks you can use either the included handle or to speed up the process the Ultra-Fab Speed Socket # UF48-979005 can be used with a cordless drill.
view full answer... - Fit of TJSCHD-24 Stabilizer Jacks on 2016 Forest River Sunseeker 2450S MotorhomeThe etrailer.com # TJSCHD-24 Scissor Stabilizer Jacks are a universal-fit item, so it should fit just about anything. The jacks would bolt to the underside of the frame members of your motorhome. When closed, the jack is 26 inches long, so if you can find a suitable mounting point on the underside of the trailer frame that's 13 or more inches inboard of the side of the motorhome, the jack will install without extending past the side of the motorhome. I've linked you to a product description...
view full answer... - Leveling Scissor Jack Recommendation for a 24 ft Class C RVConsidering the weight of your 24 fot Class C RV these Leveling Scissor Jacks, part # TJSCHD-24, should work very well for you. As far as the stability of these jacks, like you said, you will want to have the wheels blocked so that if the jacks are down the trailer will not be able to roll. And for side to side stability, as long as the terrain is within reason you should not have to worry about side to side stability. These jacks are pretty heavy duty and should provide you with enough...
view full answer... - Recommended Stabilizer Jacks for a 2001 Fleetwood Wilderness Travel TrailerIn order to help stabilize your 2001 Fleetwood Wilderness Travel Trailer I recommend using two sets of the Scissor Stabilizer Jacks w/ Handle part # TJSCHD-24, one of each side of the trailer as this will provide the most stability. These jacks are easy to install and might even use the same holes as the jacks you have now. They offer up to 18-3/4" of lift and have a 2,500 lb per jack rating. If you really wanted to fully stabilize the trailer then you could also add a set of the Super...
view full answer... - How To Choose the Correct Trailer Scissor Stabilizer Jacks for an RVIt sounds like you might be trying to pick out a set of stabilizer jacks for your trailer. If that is the case then what you will want to do is park your trailer on flat-level ground and then level it. Once this is done you can then measure from the ground to the bottom of the frame where the stabilizer jacks will mount. If this distance does not exceed 18-3/4" then you can use the Scissor Stabilizer Jacks w/ Handle part # TJSCHD-24. If this distance does exceed 18-3/4" then you can add...
view full answer... - Can Powerbuilt Unijack Bottle Jack Be Used As Stabilizer For 24-Ft Travel TrailerThe Powerbuilt Unijack Bottle Jack, part # ALL620471 is designed to be use when you need to work on a trailer or change a tire, but is not designed to be used as a stabilizer. If you need stabilizers for your travel trailer I recommend Scissor Stabilizer Jacks like part # TJSCHD-24. When collapsed these jacks are 5-inches tall, and when extended the height is 23-3/4 inches. These have a capacity of 2,500-lbs per jack.
view full answer... - How To Properly Measure For A Rise And Drop On A Trailer The receiver on your trailer generally can't be adjusted, however the hitch can be adjusted. In order to determine the correct hitch for your trailer, you're going to want to measure your hitch height. You can do this by, measuring from the ground to the top edge of the hitch receiver, then measure from the bottom edge of the trailer's coupler. You'll want to now, subtract the height of the receiver from the height of the coupler. If the measurement is negative, you need to drop the...
view full answer... - Fit of TJSC-24 Stabilizing Jack on Forest River Rockwood Mini Lite Travel TrailerThe # TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you. Please note, the handle is sold separately as part # TJSC-24-HD but it's included if you purchase the pair as part # TJSCHD-24 for the 4 jack set as part # TJSCHD-24-4. If you click the produced link, you can see a product demonstration video featuring the...
view full answer...
- Can Middle Rod in Scissor Jack be ReplacedThe middle bolt that extends/retracts scissor jacks is unfortunately non-replaceable so you'll have to replace the jack(s) entirely. This is because if that bolt needs replacing then more times than not the whole jack is messed up and it's safer to replace the whole thing. Here are our etrailer-branded jacks in different quantities: Single - # TJSC-24 Pair - # TJSCHD-24 Set of 4 - # TJSCHD-24-4 These jacks are rated for 5,000 lbs and have a 18-3/4" lift. I've attached a review video for...
view full answer... - Stabilizer Jack Recommendation for Over 1,000 lbs Capacity Per JackThe next step up from the Stabilizer Jacks # TJ01RT-HD is a scissor jack setup and for that I recommend the Scissor Stabilizer Jacks w/ Handle # TJSCHD-24. Scissor jacks aren't as quick to deploy and retract as the stabilizer jacks you're looking at but they do have a higher weight capacity at 2,500 lbs per jack. Please note these styles of jacks are only designed to help support a load and shouldn't be used to fully support the weight of your trailer.
view full answer... - How To find The Correct Replacement Door Gasket For A 2013 Forest River R-Pod 194 Travel Trailer To find the correct replacement gasket for the compartment door on your 2013 Forest River R-Pod 194 I would need to know the profile (shape) and dimensions. For example, the # SR35ZR is a half round shape that's 11/16" wide x 3/8" tall. If you can get me the dimensions and profile of your current gasket I'd be happy to find a replacement for you.
view full answer...
- Recommended Set of Scissor Jacks for Stabilizing Travel TrailerWe do offer many choices in a scissor-type stabilizer jack for your travel trailer. You can see all of them by clicking on the link provided. On the page you can click on the filters for the weight capacity, lift height and type of mounting method you prefer - bolt-on or weld-on. For a set of two scissor jacks that each have a 2500-lb rating and 18-3/4-inches of lift we offer # TJSCHD-24. This set comes with a crank handle and you can see its features and operation in the video I linked...
view full answer... - Measuring Frame Height for Leveling JacksMeasure from the ground to your trailer frame when it is level and you'll know what you would need to level your trailer. The scissor jacks part # TJSCHD-24 can provide up to 18-3/4 inches of lift so they would be a good option if your frame height is below that figure.
view full answer... - Will Higher Rated Leaf Springs Increase Camper Ride HeightOther than gaining you a height difference equivalent to the difference in the thickness of the spring pack, swapping out your existing 4 leaf springs for springs with 6 leaves won't have any effect on the trailer's ride, assuming that 1) The replacement spring is rated the same as the original 2) The original springs weren't completely worn out past their service life So, unless the existing springs are completely worn out, replacing them won't remove the 'squishy' feeling you described....
view full answer... - What Size is the Drive Nut on the Scissor Stabilizer Jacks # TJSCHD-24I went out to the warehouse to measure the drive nut on the Scissor Stabilizer Jacks # TJSCHD-24. From wrench flat to wrench flat it is 0.72 inches so just a hair under 3/4 inch and just a hair above 18mm.
view full answer... - Stabilizers for 1991 Coleman Shenandoah Pop-up CamperIf your Coleman Shenandoah pop-up camper trailer still shakes when you walk around inside it you can add more stabilizers to supplement the OEM swing-down jacks. When it comes to keeping a camper steady more points of stabilization are better so I suggest keeping what you have and simply adding more jacks. If you want to permanently mount additional stabilizers you can use scissor jacks like # UF48-979031 (3-inches of lift) or # TJSCHD-24 (18-3/4-inches of lift). If you want to avoid...
view full answer... - Recommended Jack to Lift a Trailer to Change a TireTrailer stabilizer jacks like # TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack to hold the trailer in the same fashion one would hold your car to change the tire. For this we have several options like the Performance Tool Electric Car Jack # PTW1609 which has a maximum lift of 14 inches and can support up to 4,000 pounds. If you need an option...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Installed by:
Andy C
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Daniel P.
12/22/2021
Still as happy with the product today as I was the day I installed them.