Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Add or replace a tie-down point on your boat's transom or bow with this Erickson eye anchor. Constructed of stainless steel, it's ideal for marine application because it will not rust or corrode. Includes mounting hardware.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be reviewing part number EM53909. This is the Erickson I tie down anchor for your boat, transom or bowel. The sturdy I anchor is going to add or replace a tie down pullet on your boats transom or bowel. It's made from a nice stainless steel construction, so it is going to withstand salt water environments. It's also going to stand up well against rust and corrosion. It also includes the washer and the nut for easier mounting. The rod dimension is going to give us a thickness of 3/8 of an inch and overall length of right around 3 inches.
This portion here is going to measure 2 x 1 3/4 of an inch and the opening is going to give us a diameter of about 7/8 of an inch. The way that you would install this is you'd place the rod through the hole and then you would use your washer and nut to secure everything into position to create that nice secure tie down anchor that you need on your boat. That's going to do it for today's look at part number Em53909. That's the Erickson I tie down anchor. .
Average Customer Rating: 4.6 out of 5 stars (28 Customer Reviews)
Add or replace a tie-down point on your boat's transom or bow with this Erickson eye anchor. Constructed of stainless steel, it's ideal for marine application because it will not rust or corrode. Includes mounting hardware.Mounted 3 of these on each side of our small travel trailer. Main reason was to anchor the inside rails that our cabinets are mounted to to assure that they don't shake loose. Outside the anchors are attachment points for shades or a clothesline. It all works great.
I used this to put on my Silverado for attaching my Trailer Brake break away cable to make it easier and to be separate from the safety chain shackles. Just an idea if you don't mind drilling your bumper.
These tie-down will work fine I think, but the originals had a pin between the tie-down and the boat which prevented the tie-down from rotating.
I ordered this boweye because it is stainless, instead of just being a chromed metal. The threaded rod that screws into the base of the boweye appears to also be stainless for extended use around salt water.
These were the exact products I was looking for mounting ropes to my pontoon boat
Excellent replacement part. Fits perfectly in place of original.
Works like it should
Be careful. These tie-downs are hallow not solid and should not be used to tow your boat. The pictures are miss leading. I'm returning mine
Patrick B.
12/28/2013
These are not designed for any towing application and should not be used in such a manner. These are tie-down points for securing a bow or transom to a trailer. The weight of the boat is supported by the trailer bunks, these tie-downs are to be used only to keep the boat from shifting on the trailer. In such an application, the hollow base of the tie-down can hold up to the task.
I have not installed them yet but they are just what I was looking for.
I used these for a truck tool box tie down, worked very well. The thread is long but you can cut it shorter if you need to. All stainless hardware. Great product!
They will work for what I need
Product as described. Replaced the original tie-downs on my 1970-ish boat that were damaged during transom replacement.
The threaded stud was bigger in diameter than previous eyelets (stock - one bent other one broke off) . This was a benefit with increased strength and better quality than stock ones. Included stainless nut and washer. I am happy with quality and price. Good purchase!
Just what I was looking for, could not find this item locally , so glad I was able to find them here and at an affordable price, shipping was pretty quick also.
JUST WHAT i wanted!!
Products were easy to locate on the web site. Order was received in less than a week. Good quality and exactly what I wanted at reasonable prices.
I can pull those 50 55lb flatheads with that eye
Product was as described and high quality. It arrived ontime and the people were easy to work with.
Thanks for a quick response and shipping great product it look great and work well in my rebuild
Drill 3/8" hole. Works good.
quality as expected.
Works like a charm/
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregory
8/26/2023
Ive been asked to update my review. It has worked as concieved. If we park where there is sun on our fridge, I deploy a sun tarp to provide shade to that area of our camp trailer. We use the others as needed. So we have canopies that the wind doesnt rip off the trailer, or a drying line are the usual chores. The other reason for the install was to reinforce the interior cabinets and I havent had anything loosen since I made this modification. It is practically invisible and when noticed it looks nice.