Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Base Plates

• Recommendation For Flat Towing 2009 Jeep Wrangler Behind RV
  Yes, either braking system will work. Both the Blue Ox Patriot, Item # BLU37TR, and the Roadmaster InvisiBrake System, Item # RM-8700, are good options. Both will need power connections so you can connect the Patriot with a 12V Outlet Kit like Item # RM-9332 and the InvisiBrake will connect directly to the battery. Of the two, I recommend the Roadmaster InvisiBrake System, Item # RM-8700, because it is a one-time install and then you are good to go. Because you will need to disconnect...
  view full answer...
• Base Plate Kit and Accessories Needed to Tow a 2007 Jeep Wrangler with a Stowmaster 5000 Tow Bar
  The Roadmaster XL Base Plate Kit, # 1429-1, is the correct base plate kit for your 2007 Jeep Wrangler 2 door, as long as there are no aftermarket parts like bumper, winch or brush guards on the front of the Jeep. This kit is compatible with the older Stowmaster 5000 Tow Bar. As long you have a set of car side quick disconnects you are ready to go. If not you can use the RoadMaster Quick Disconnects, # RM-222. To complete your towing setup, I recommend safety cables # RM-643. And for lighting...
  view full answer...
• Parts Needed to Flat-Tow a 2008 Jeep Wrangler with Manual Transmission
  In order to flat-tow your 2008 Jeep Wrangler with a manual transmission you will need a tow bar, base plate kit, safety cables, supplemental braking system, wiring harness, and possible high-low adapter. None of our tow bars come with base plate kits so you will need to purchase both in order to attach your vehicle to the motorhome unless your Jeep has d-rings which can be used for towing in which case you would need an adapter. For a non-binding tow bar I recommend the Roadmaster Falcon...
  view full answer...
• What Roadmaster EZ4 Base Plate Kit Will Fit A 2010 Jeep Wrangler
  The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, will fit a 2010 Jeep Wrangler without aftermarket bumpers, winch, or guards. There is some trimming needed on the factory rock guard underneath the front bumper. The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, is for the 2007 to 2009 Jeep Wrangler and Wrangler Unlimited. It will not fit the 2010 Jeep Wrangler. The Roadmaster EZ4 series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they have...
  view full answer...
• Parts Needed to Flat Tow a 2008 Jeep Wrangler Unlimited Sahara with Stock Bumper Behind an RV
  I will be happy to get you set up to flat tow your 2008 Jeep Wrangler Unlimited Sahara behind your RV. Like you said, you will need base plates, a tow bar, safety cables, lighting, and supplemental braking. Since you already know that you want to go with the Falcon 2 tow bar (fantastic choice) then for compatible base plates you can use # 1429-1. I have linked the installation instructions for you. For safety cables you can use # RM-643. They have a coiled design that helps keep the cables...
  view full answer...
• Can a Front Mount Hitch Be Used with Base Plates on a 2007 Jeep Wrangler
  The best solution for your situation would be to remove the base plates and install a front mount hitch like the Draw-Tite Front Mount Hitch, # 65069. On your 2007 Jeep Wrangler, the base plates and the front mount hitches use the same mounting location, so they cannot be installed together. Also, base plates were not designed to take any vertical weight like the tongue weight of a trailer, so I would not advise making some type of custom receiver to work with the base plates. Some bumper...
  view full answer...
  
• Can I Get Replacement Draw bars for My 2007 Jeep Wrangler
  If you do not have the complete base plate kit and are referring to the drawbars from the base plate kit that are removable and attach to your tow bar then you will need to purchase a new base plate kit. The manufacturer will not sell the drawbars separately because the draw bars are custom fitted for each base plate kit and the possibility of the base plate kit parts already on the vehicle being damaged. The custom base plate kit for your 2007 Jeep wrangler would be one of four kits...
  view full answer...
• Recommended Base Plate And Other Items Needed To Tow 2008 Jeep Wrangler With Stowmaster Tow Bar
  Based on the information you gave, I believe you have a Stowmaster tow bar similar to Item # RM-501. This tow bar is compatible with most Roadmaster vehicle-specific base plates. I would recommend the Roadmaster XL Base Plate Kit Item # 1429-1. These will fit with the standard factory bumper on the front of your Jeep. If you need safety cables then you can use Roadmaster 68-Inch Coiled cables Item # RM-643. If you have a different bumper on your Jeep then let me know and I will find the...
  view full answer...
• Parts Needed to Flat Tow a 2007 Jeep Wrangler Unlimited Behind a Motor Home with Stowmaster Tow Bar
  In order to flat tow the 2007 Jeep Wrangler Unlimited you will need base plates that attach to the vehicle frame. Because the bumper structure is attached to the frame and not part of the frame, you do not want to attach tow bar parts to it to flat tow the vehicle because there is a possible point of failure between the bumper and frame. For some base plates, you have options, see link to right. I like the XL style base plates, # 1429-1, because they have fewer restrictions that the MX...
  view full answer...
• What Parts Needed to Use a Roadmaster Falcon 5250 Tow Bar on a 2007 Jeep Wrangler for Flat Towing
  Flat towing your Jeep Wrangler behind your Class A motor home will require the tow bar, a lighting/wiring kit, safety chains, base plates and a supplemental braking system. The linked article will give you background on each of these. The Quick Disconnect system for Roadmaster tow bars consists of both vehicle-side and tow-bar-side parts. Car-side brackets are available alone as part # RM-222 and tow bar-side brackets as part # RM-221. The complete bracket kit is part # RM-201; this includes...
  view full answer...
• Recommended Crossbar-Style Roadmaster Baseplates For A 2009 Jeep Wrangler
  For a crossbar-style baseplate like the # 52289-1 for your 2009 Jeep Wrangler you would need the Roadmaster Crossbar-Style Base Plate Kit # 1429-1. These would connect to the Roadmaster StowMaster Tow Bar # RM-501 that you were looking at. If you haven't gotten the rest of your flat towing components for your Wrangler then I have the following recommendations as well: Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit will transfer...
  view full answer...
• Parts Needed to Flat Tow a 2007 Jeep Wrangler X Behind a Motor Home
  To flat tow your 2007 Jeep Wrangler X manual behind a motor home you will need base plates, a tow bar, safety cables, lighting, and supplemental braking. For base plates there are several options depending on how your Jeep is equipped. If it has a factory front bumper and no winch, skid plate, or brush guard you can use Roadmaster base plates # 1429-1. If the Jeep has a Warn or Mopar bumper that is any of the following parts you can use # 1430-1 or # 1430-3: 82211715, 82211715AB or 82209740AD...
  view full answer...
• Base Plates, Tow Bar Accessories Recommendation Flat Towing 2008 Jeep Wrangler Behind Motorhome
  Because prices can fluctuate, I'll make some recommendations for you, and you can click the product links to see current pricing for each item. To flat tow your 2008 Jeep Wrangler JK with the stock bumper behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. You'll also need a stoplight switch, # RM-751452 and a few other odds and ends. For your base plates and tow bar, I recommend using the Roadmaster...
  view full answer...
• Can Roadmaster Falcon Tow Bar be Used with EZ4 Base Plate Kit on 2016 Jeep Cherokee
  Yes, the Roadmaster Falcon 2 Tow Bar part # RM-520 that you referenced as well as the older model 5250 is compatible with Roadmaster EZ4 base plates so it would work well for your kit part # RM-521447-4 for your 2016 Jeep Cherokee. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring...
  view full answer...
• Adapter from Blue Ox Alpha Tow Bar to Roadmaster XL Base Plate Kit on 2007 Jeep Wrangler
  There are adapters to connect your Blue Ox Alpha Tow Bar # BX7380 to your Roadmaster XL Base Plates # 1429-1. You can use either Roadmaster # RM-032 or Blue Ox # BX88178.
  view full answer...
• Base Plate Adapter Recommendation for Duncan TowMatic II to Connect to Roadmaster Base Plate
  We have just what you need. Your Duncan DM7007 is the Towmatic II which we have an adapter that allows it to attach to Roadmaster base plate kits. The adapter is the part # RM-038. So then for a base plate kit you would want the part # 1429-1 which is a confirmed fit for your 2008 Jeep Wrangler with a standard bumper. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow...
  view full answer...
• Can I Use Electric Brake Contoller on Class C Motorhome Flat Towing 2007 Jeep Wrangler Unlimited X
  The item you selected, Tekonsha Prodigy P2 Brake Controller, part # 90885 is a brake controller to install on a vehicle towing a trailer with electric brakes. Your Jeep does not have electric brakes and part # 90885 is not compatible to activate the brakes on your 2007 Jeep Wrangler Unlimited while it is being flat towed. When towing a vehicle behind an RV or motor home, you will need to use a supplemental braking system. I would recommend the Roadmaster 9400 Portable Braking System, part...
  view full answer...
• Roadmaster Base Plate Kit for 2006 Pontiac Vibe to Work with Falcon Tow Bar
  For a base plate kit confirmed as a fit for your 2006 Pontiac Vibe the Roadmaster XL kit part # 3130-1 is a confirmed fit that would work well with your Roadmaster Falcon part # RM-520.
  view full answer...
• Base Plates, Lighting, Safety Cables and Supplemental Braking to Flat Tow a 2007 Jeep Wrangler
  For your 2007 Jeep Wrangler JK, X model, there are a couple of different base plate options depending on how the vehicle is equipped. If it does NOT have an aftermarket bumper, winch, or guard, you can use # 1429-1. If it does have a Mopar/Warn bumper, use # 1430-1. Both sets of base plates are compatible with the Falcon Tow Bar, # RM-520. In addition to the base plates and tow bar, you will also need safety cables, lighting, and a supplemental braking system in the Wrangler. For safety...
  view full answer...
• Roadmaster EZ4 Tow Bar Base Plate Kit Available for a 2009 Jeep Wrangler Rubicon With Winch
  If the winch on your 2009 Jeep Wrangler Rubicon is mounted on top of your factory bumper and is not tied into the frame rail, then you can use the Roadmaster Base Plate Kit, # RM-521448-4. This base plate kit will mount on the bottom under the front bumper and tie into the frame rails of the front bumper and cannot be used with Mopar skid plates or aftermarket bumpers. If the winch on your vehicle is on a Mopar or Warn bumper, then you will want to use base plate kit # RM-521448-4. You...
  view full answer...
• Supplemental Braking System and Other Parts Needed to Flat Tow a 2009 Jeep Wrangler
  Unfortunately, flat towing a vehicle can be expensive because there a number of parts involved and many of them are pretty costly. From our experience the surge brake style supplemental braking systems are not up to par with the electric systems like the Roadmaster InvisiBrake # RM-8700. The braking power is just inadequate. Using the InvisiBrake will give you great, reliable braking and once it's installed you never have to worry about it. With your 2009 Jeep Wrangler you'll also need...
  view full answer...
• Parts Needed to Flat Tow 1995 Jeep Wrangler with Falcon Tow Bar
  You will need the base plate kit part # 1409-3 which is confirmed to fit your 1995 Jeep Wrangler with a stock bumper and work with your Falcon tow bar. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle....
  view full answer...
• Parts Needed to Flat Tow a 2006 Saturn Ion with Roadmaster Falcon Tow Bar
  Your Roadmaster Falcon Tow Bar part # RM-520 is a great tow bar that would work well for you. You will need to start with a base plate kit confirmed as a fit for your 2006 Saturn Ion. For that you would want the part # 3136-1 which is a confirmed fit. Looks like you have coiled safety cable already too. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle...
  view full answer...
• Parts Needed to Flat Tow a 2008 Jeep Wrangler
  I have a base plate kit recommendation that will work on your 2008 Jeep Wrangler without aftermarket bumpers winches or guards, but the part # RM-521448-4 is for newer Wranglers so it would not work for you. You would want the Roadmaster Base Plate kit part # RM-521448-4. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For...
  view full answer...

Do you have a question about this Base Plate?