Timbren 1" Spacer For Raised Frame Vehicles - 1/2" Bushing

See what our Experts say about this Timbren Accessories and Parts

• How Many Lift Spacers are Needed for Timbren Springs on a Lifted 2013 Chevy Silverado 1500
  Finding the correct spacer(s) for a lifted truck can be a little tricky sometimes due to the number of lift kits out there. The best way to determine how many spacers you need for the Timbren Suspension Kit, # TGMRCK15S, for your 2013 Chevy Silverado 1500 is to measure the distance from the underside of your frame where your bump stop sits to the axle directly below where the spring makes contact. The spring and bracket in this kit measure 5 inches tall unloaded and the spring should...
  view full answer...
  
• What Spacers are Available To Accommodate a 6" Lift on My 1995 Ford F-250
  Depending on the size of the bolt on your 1995 Ford F-250, we have a couple of options for spacers. Timbren does recommend 1/2" to 1 1/2" clearance between your Timbren and the contact point when the truck isn't under a load. The spacer is a solution if there is more than that clearance. If your bolt is a 1/2" bolt you will need the Timbren 1" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25723-90AD00 or the Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25722-90F00. If...
  view full answer...
• Height of Timbren # TTORSEQ and Spacers Needed for Lifted Truck
  I went out to our warehouse and measured an overall height with the mounting bracket of 5 inches for the Timbren Rear Suspension Enhancement System # TTORSEQ. Timbren recommends having a 1/2 inch to 1-1/2 inches between the spring and the axle when the truck is empty so if you measure between the frame where your bump stop is mounted and the axle and get greater than 6-1/2 inches you will want to fill that gap with a spacer or two. We have 1 inch Spacers with # TA25723-90AD00 or 1/2 inch...
  view full answer...
  
• How To Prevent Sag While Towing with a Lifted 2012 Nissan Xterra
  I do have an option for you but the SumoSprings Solo Custom Helper Springs part # SSR-210-47 are not the best option for a lifted vehicle because they don't come with spacers nor are they offered separately. The option to make your own spacers is certainly possible however, if you use the Timbren Suspension Enhancement System part # TJRC01 which is a very similar kit you can use a combination of both part # TA25723-90AD00 and part # TA25722-90F00 until you get the gap down to 1/2"-1-1/2"....
  view full answer...
• Bump Stops for a Timbren Rear Suspension Kit on a Lifted 2020 Chevy Silverado 1500
  The best way to determine how many spacers you need for the Timbren Suspension Kit item # TGMRCK15S, for your 2020 Chevy Silverado 1500, is to measure the distance from the underside of your frame where your bump stop sits to the axle directly below where the spring makes contact. The spring and bracket in this kit measure 5 inches tall unloaded and the spring should sit about 1 inch above your axle once it is installed with no load in the truck. From here, measure the frame to axle distance...
  view full answer...
• Timbren Suspension Kit for a 2024 GMC Sierra 3500 with 2" Block in Rear
  Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System # TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same height as it was before the lift then you don't need a spacer, but if that 2" lift increased your frame height then you'll need to use the 1" Spacer # TA25723-90AD00 (1 for each side) and get some longer mounting bolts from your local hardware store.
  view full answer...
• Suspension Enhancement and WDS for 2014 Chevrolet Silverado 1500 Hauling Lawn Equipment Trailer
  The first thing I suggest is that you ensure there is a Weight Distribution System being used with the trailer set-up. There may still be need/benefit of suspension enhancement to the truck even after a WDS is installed, but this should be first priority in arranging a safe towing situation for something with that much weight. Please note the link to help articles below on this subject, hopefully you will find these to be of value and assist in making an informed decision. Please checkout...
  view full answer...
• Suspension Enhancement to Help Sag of 2016 Toyota Tundra With Lift
  To help with the sag of your 2016 Toyota Tundra I recommend going with Timbrens, as they are designed to take the brunt of the added weight when you tow. They will engage when needed to counteract both sag and body roll to help level your truck, while also stabilizing it to help combat sway. You'll need spacers as well, but first, the correct fit for Timbrens on a 2016 Toyota Tundra are the following: - Timbren Suspension Enhancement System # T62FR The springs and bracket have a total...
  view full answer...
• Will The SumoSprings Fit On a 2022 GMC Sierra 1500 Limited With a 2 Lift?
  The 1" spacer included with the SumoSprings Solo Custom Helper Springs # SS45FR for your 2022 GMC Sierra 1500 Limited allows you to place more preload on the spring. This will reduce the amount of sag when loaded versus without the spacer. If your have a 2" lift that raises the rear suspension you will likely need additional Spacers # TA25723-90AD00 to be able to use the Sumosprings. You will also need to source the correct length bolts locally as the included bolts are only designed for...
  view full answer...
• Rear Helper Springs for a 2006 Toyota 4Runner with 1 Inch Rear Lift Kit
  If you are getting a lift kit on your 2006 Toyota 4Runner then air bags that fit inside the coil springs are not going to work. There are no spacers to make up for the additional space created by the lift kit for the coil spring air bags. The exception is if you were to have a body lift instead of a suspension lift since in that case there would not be any extra space. There are spacers available for the Timbren systems though so I recommend going with # TTORSEQ. If the lift kit does add...
  view full answer...
• Is There A Spacer Available For A SumoSprings Solo Helper Spring On A 2019 Nissan Titan
  As you mentioned your 2019 Nissan Titan being a work truck there will be another option, but there is no spacer available for the SumoSprings Solo Custom Helper Springs # SS95GR, unfortunately. With that said, as the # SS95GR is rated to 1,500 pounds of capacity, you may want to go with a higher rated product, like the Timbren Rear Suspension Enhancement System # TNRTTN. This will have a 6,000 pound capacity and will do a better job for getting rid of the sag, but I do have to mention...
  view full answer...
• Will Installing Timbren SES Affect Offroad Performance Of A 2024 Toyota Tundra TRD Pro
  Hey Carlos, Yes, installing the Timbren Suspension Enhancement System # T45MR will affect your ride quality and handling while off-roading in your Tundra. These springs provide a cushion between your frame and axle so that the harsh bumps over rough terrain won't throw you around. Timbrens are well known within the off-roading/overlanding community as the gold standard for suspension enhancement so you're making a solid choice. Timbren recommends a 1" gap between the axle and spring...
  view full answer...
• Recommended Front Suspension Enhancement to Reduce Bounce and Hop on 1976 Ford F-250 4x4
  It sounds like the additional weight on the front of your truck when decelerating is an issue. It sounds like the rear of your truck has the additional support but the front of your truck would benefit from suspension enhancement. I recommend the Timbren Front Suspension Enhancement System # TFF2504 which is the only fit we have for your 1976 Ford F-250 4x4. This will help absorb road shock and improve the stability of your truck.
  view full answer...
• How Tall Is The Timbren Rear Suspension Enhancement TGMRG35 For 2017 Chevy Express Van?
  I had our warehouse measure the Timbren Rear Suspension Enhancement System # TGMRG35 you were looking at for your 2017 Chevrolet Express Van and the rubber portion measures 5-1/8" tall as shown in the included diagram. You can use spacers with these springs which are the 1/2" spacer # TA25722-90F00, or 1" spacer # TA25723-90AD00 though you should not need them unless you have lifted your van. If you need the spacers you will need to find a longer Grade 8 1/2" diameter T-Bolt from a local...
  view full answer...
  
• Timbren Suspension Enhancement For 2014 Dodge Ram 2500
  Here is the Timbren Rear Suspension Enhancement System # TDR2500D you need for your 2014 Ram 2500. I've included an installation video and some others for you to watch! It is on a 2019 Ram 2500 but will be practically the same install. You should use spacers since you have a 6 inch lift. Here is one for 3/8 inch bushings # A25723-90AH00 and some for 1/2 inch bushings # TA25723-90AD00.
  view full answer...
• Recommended Helper Springs for 2012 Nissan Titan Pro-4X
  I'm really glad you asked because we only have one confirmed fit for the Pro-4x model. It is the Timbren Suspension Enhancement System - Rear Axle # TNRTTNB which is a jounce style enhancement rated for 6,000 lbs load support. It will give you a progressive support as it provides additional support as needed to increase stability while reducing body roll and vehicle sag. It will not change the factory ride when not hauling a load, but will engage as needed for payload and towing.
  view full answer...
• Recommended Suspension Enhancement for a 4WD 2002 Toyota 4Runner
  You're going to want to go with the set of Timbrens item # TABSTOR4R you were looking at. The only SumoSprings available for the 4WD 2002 Toyota 4Runner are for the front end item # SS84PV. The Timbren Active Off-Road Bumpstops item # TABSTOR4R have a 2,000 lbs capacity. Since your 4Runner has a 3" lift you will also need two of the Timbren 1" Spacer For Raised Frame Vehicles item # TA25723-90AD00. The kit already comes with two but purchasing a couple more will give you two 1" spacers...
  view full answer...
• Suspension Enhancement For My 2016 Ram 1500 With A 4.5 Inch Lift
  When it comes to installing a suspension enhancement system on your 2016 Ram 1500 The Timbren Rear Suspension Enhancement System # TDR1500DQ will work for you. This system has a 8,600 pound capacity and improves suspension, handling and safety. It also provides additional support as needed, so you always get a smooth, comfortable ride. This system increases stability and reduces vehicle sag. When it comes to getting the correct spacer kit for your lift you first need to measure the...
  view full answer...
  
• Recommended Suspension Enhancement For 2022 Toyota Tundra With 3-1/2 Inch Lift
  That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the following: - Timbren Suspension Enhancement System - Rear Axle # T45MR The reason why I like the # T45MR is because they the brunt of that added weight, engaging when needed to counteract any type of sag and body roll you'll get with the camper and that added...
  view full answer...
  
• Recommended Timbrens for a 2018 Toyota Tundra with 3 Inch Lift Kit
  For your 2018 Toyota Tundra, I recommend using the Timbren Rear Suspension Enhancement System part # TTORTUN4 with three of the Timbren Spacer For Raised Frame Vehicles part # TA25723-90AD00 stacked. Assuming you have a full 3" suspension lift and not a body lift, this option should give you 1/2"-1" of clearance but the spring measures 3-3/4" tall so you can can always measure to be certain. Please keep in mind you will need to obtain longer M10 bolts from your local hardware store to install...
  view full answer...
• What 1-Inch Spacer Works with the Timbrens # TGMRCK15S on My 2022 Chevy Silverado 1500 4x4?
  For 1-inch spacers that are compatible with the Timbrens # TGMRCK15S, I recommend the Timbren 1" Spacer For Raised Frame Vehicles # TA25723-90AD00 (1/2 inch bushing). This is because the bolts that come with the Timbrens are compatible with the 1/2 bushing.
  view full answer...
• Suspension Enhancement Options For 1999 Toyota 4Runner
  I do have some Firestone Coil-Rite Air Helper Springs # F4135 for your rear axle. If your springs have lost some compression and your rear end feels sloppy, these will help tighten up the back suspension to help especially if you have a trailer connected to your 1999 Toyota 4Runner. If you're bottoming out when hitting bumps/dips in the trails you will want to get the Timbren Active Off-Road Bumpstops # TABSTOR4R for the rear. This will only make a difference if your suspension is being...
  view full answer...
• Will the Timbren Rear Suspension Enhancement System Part # TDR1500DQ Fit a Lifted 2014 Ram 1500
  Yes, you can still use the Timbren Rear Suspension Enhancement System part # TDR1500DQ on your lifted 2014 Ram 1500 you just need to add the Timbren 1" Spacer For Raised Frame Vehicles part # TA25723-90AD00 to compensate for the lift. This spacer will be installed between part TA25723-90AD00 (2) and TA25723-90AD00 (3) in the attached photo. You may or may not need to trim the spacer to fit inside the cup. A longer M10 bolt however will most likely be needed.
  view full answer...
  
• Is There a Spacer For the Furrion Vision S Side Cameras To Work On a Recessed Application?
  While we do not have a specific spacer for the Furrion Vision Side Cameras # FCE48TASL the 1/2" Spacer # TA25722-90F00 would be a good starting point. We also have it in a 1" Thickness # TA25723-90AD00 depending on how deep your recess is. These spacers already has a 1/2" hole through the center of it for running the wiring, and its polyethylene construction is not going to rust out over time. These will most likely need to be trimmed down to fit your opening. I find it best to use a fine...
  view full answer...

Do you have a question about this Accessories and Part?