Seaflo Thru-Hull Fitting for Livewells and Bilge Pumps - 1-1/2" Inner Diameter

Video Transcript for Review of Seaflo 1-1/2 Boat Drain Socket - SE88FR

Michael: Hi there. I'm Michael with etrailer.com.Today we're going to take a quick look at the sea flow through hole fitting. This is going to be a plastic drain fitting that you can put in your boat through the hull there. See, it's got a nut on the backside so that you can tighten it down against the hull and have a nice strong support system. This is going to provide an outlet for your LiveWell overflow or an exhaust port for your bilge pump. So you can get water out from the inside of your boat and put it out into the body of water that you're in.Because this is a plastic construction, it's going to resist damage from chemicals and saltwater exposure, so it should hold up for a nice long time for you.

You can see it does have a nice finish so it's going to look nice on the outside of your boat. It is a white color, so it should blend in pretty well with your boat.As far as our dimensions go, this is right at three inches wide for our outer diameter. Our inner diameter, I'd say it's about an inch and a half there. You can see on the backside, the portion that's going to have a hose plugged onto it. It's right about an inch and a half as well.

Our overall length, looking right at four inches.So overall I think this is going to be a great option to help dress up that outlet to get the water out of your boat and it should look nice and hold up well, do a good job for you for a long time to come.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.