Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the pro-series detachable foot plate, designed for use with two and quarter inch main tube jacks. Part number on it is PS1400700340. Now as you can see, we've got an included pin here, this is going to securely attach the foot plate to the bottom of our jack. The whole diameter here inside to inside is about two inches. This is going to be designed to fit the jacks so they have the two and a quarter inch main tube and the two-inch tube that comes out of those. The main body of our foot plate measures about three and three quarters of an inch wide and we've got about seven and a half inches in width. Now attachment to your trailer couldn't be easier.
What we do is just bring it down underneath our main shank, slide it into position, we'll lift up on it, and then slide through our pin. Now with that just the steel tube that comes out we've been having issues with this just digging down into the gravel a little bit and causing us some headaches so our foot-pack design here is going to help to dissipate that and spread that weight out to give us more upward pushing force. They've designed it with a Zinc construction, so that's going to help to prevent the rust and corrosion as we go down the road. As you can see with it installed, it's just a matter of letting your jack do the work now. As you can see there, we've got a nice sturdy fit. Our foot-packI's not going anywhere.
We could keep lifting it up but I don't feel like wasting your time with that, so go ahead and just lower it back down. This is going to be fully detachable, if you decide that you don't want the noise or don't want it attached as your going down the road. We can leave it connected just as you see there, but simply by just removing that pin and raising our tube up high enough we'll be able to take it right back off. So there you go guys, that's today's look at the pro-series detachable footplate for two and quarter inch main tube or two inch down tube jacks. Part number on it is PS1400700340. .
Average Customer Rating: 4.8 out of 5 stars (609 Customer Reviews)
Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.Decent foot plate but it didn’t come with a connector pin.
Fit very nice, prevents damage to my jack shaft. Wide foot supports the weight of the trailer.
Hard to find locally, quick and easy from etrailer
The footplate is a perfect fit for the jack, and is large enough to provide a stable footing. I am using it on a Rockwood 25 ft Travel Trailer. After having an electric jack that failed too soon, I am glade to return to a manual jack.
This what I needed for my trailer, more stable, also very fast shipping, and the commutation was awesome
Worked perfect to replace the missing jack foot on a vintage toy hauler. A little effort to redo the crushed tubular section & the new foot slipped right on. Thanks for the prompt service.
Shipping was very fast and excellent pr oduct
This is a great foot plate for 2" jacks. I would not put on a new jack without it. Shipping was prompt.
Buddy H.
11/3/2016
This is a great plate. It has held up well and continues to do a great job.
This foot pad gives me good clearance while towing it behind my SUV
Jerry
12/4/2018
So far, its still working great No problems with it
My leveling jack broke on my camper/ice shanty as I was preparing for hard water to thicken. I remembered ordering parts from etrailer when I was building it 4+ years ago. My experience with you back then was excellent as it was this time. Thanks for the quick service and the great products.
- Curtis W.
Arrived on time as promised. Order in conjunction with a new A frame side wind jack. Fit great and is very sturdy. Would use etrailer again.
Works well, but I take it off when trav eling.
Quick service and dependable profession als
Nice strong trailer Jack plate
Exactly what I was looking for. Perfect fit, easy to order, came in about a week. 3rd order from etrailer I'll be going back for all my needs in the future!!
Used this for a swivel jack I modified for my square drop trailer.
Product was high quality, arrived quickly and worked well!
Awesome product! Well built, fit perfect. I needed to drill a couple holes in the foot to drain out any water because it will get trapped. No big deal! I would recommend this product to anyone that need one! Thanks etrailer
Fits great and works great.
Quality piece and a decent price. I never had a footplate before and I think this will well.
Am excellent product that will last and didn’t cost a lot.
Better than expected, high quality, fast shipping, it’s trailer heaven!
Arrived on time as described
After a year doing its job well.
Works and fits as advertised. Maybe not as heavy duty as I was hoping, but it will get the job done, especially for the price.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerr C.
3/12/2018
I appreciate the follow up. Your products continue to provide greatservice and give me nothing but pleasure whenever I use my vintage Pentontoy hauler. Thanks again.