Derale Stainless Steel Hose Clamps (4 Piece)

See what our Experts say about this Derale Accessories and Parts

• Recommended Transmission Cooler for a 2013 Chevy Tahoe
  I have the perfect transmission cooler option for you. Generally speaking, the best transmission cooler to use would be the largest one you have available space for. The best place to install a transmission cooler is in front of the radiator/condenser behind the grill on your 2013 Chevy Tahoe. I recommend using the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52508 because the plate and fin technology incorporated into this transmission cooler is far more efficient than...
  view full answer...
  
• Recommended Frame Rail Fluid Cooler for 200r4 Transmission on 1946 Chevy Truck
  The Derale 24" Frame Rail Fluid Cooler with -6 AN Inlets # D13225 is a great option. It does not require lines to the front of your truck to cool your transmission. There is not a longer option available, but you can run the Derale 17" Frame Rail Fluid Cooler with - 6 AN Inlets # D13221 as well if increased cooling is desired and you need to be under 45 inches. You may also be interested in the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200, Derale High-Temperature Replacement...
  view full answer...
• Adding an Engine Oil Cooler and a Power Steering Cooler to a 2007 Toyota 4Runner SR5 4.0L V6
  Thanks for asking about a Power Steering Cooler and Engine Oil cooler for your 2007 Toyota 4Runner SR5 V6. Adding two more coolers is not going to present a cooling issue for your engine/radiator. The coolers allow air to flow through them and will not transfer enough heat to the air going through them to effect the cooling performance of the vehicle's radiator. Your engine oil filter has 3/4-16 threads. So you can determine the correct threads to use from the recommended kits below,...
  view full answer...
• Can I Bypass the Factory Transmisson Cooler on a 2007 Nissan Frontier
  We do not recommend bypassing the factory cooler with a supplemental transmission cooler, but if you are going to do so, I strongly suggest using the largest and most effective cooler that will fit in your engine compartment. Keep in mind, these transmission coolers are designed to be supplemental coolers to the vehicle's cooling system, not independent coolers. As far as coolers go, the most effective design is a stacked-plate cooler like the Derale High-Performance Transmission Cooler,...
  view full answer...
• Replacement Radiator Fitting for 1996 Cadillac Fleetwood
  According to my research, your 1996 Caddy Fleetwood has the GM 5.7L engine. The radiator adapter fitting you mentioned, part # D13018 would indeed be compatible with your vehicle, and could be used to replace the cracked fitting you mention. Since the transmission line running into the radiator is a hard line, you will need to install a short length of 11/32 I.D. hose like # D13003 between the two fittings. You will also need some hose clamps, like those provided with # D13008 to secure...
  view full answer...
  
• Transmission Cooler Recommendation for 2007 Dodge Ram with Cummins Diesel
  For a full size diesel truck you'd need all the cooling power you can get if you plan to bypass your factory cooler. Stacked plate coolers are the most efficient styles of coolers around so the part # D54010 would be your best option. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Transmission Cooler for a 2013 GMC Yukon XL
  The transmission coolers that we carry are meant as supplemental coolers to the factory cooler though some people do decide to bypass the factory cooler for any number of reasons. The term tow package means different things to different manufacturers but it does often include a supplemental cooler. Adding a cooler is an inexpensive way to help get the most life out of your transmission, especially when towing. Transmission coolers are not vehicle specific. However, if you happen to have...
  view full answer...
• How To Reduce Both Engine Oil and Transmission Fluid Temps On A 2005 GMC Sierra 2500 While Towing
  I have attached a list of parts that I recommend for your 2005 GMC Sierra 2500 to help with cooling both the engine oil and transmission fluid while towing. Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960 Derale Hyper-Cool Remote Engine Cooler Kit part # D15660 Derale Snap-In Radiator Adapter Fitting part # D13035 Derale High-Temperature Replacement Hose part # D15799 Derale Stainless Steel Hose Clamps part # D13008 1/2" Barb to 1/2" Barb Union Fitting part (Local Auto...
  view full answer...
• Additional Hose Needed for Installing the Derale Series 8000 Kit # D13502 on a 2016 Nissan Frontier
  Depending on where you install the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502 on your 2016 Nissan Frontier, you may or may not need some additional hose. As you saw from the installation video on a 2014 Frontier (which is linked), some additional hose was required for the install. You can aquire new hose from our site using part # D13003 should you need it. This hose is 4 feet long and should be enough for your application. You may also need some additional clamps...
  view full answer...
• What is the Length of the Hose in the Derale 8000 Series Transmission Coolers
  The hose that comes with the # D13502 and # D13503 transmission coolers is 4 ft long. This is the same with all Derale 8000 Series transmission coolers. If you need additional hose length, we offer a 4 ft long individual hose, # D13003, and a 25 ft hose, # D13007. You may also need additional hose clamps, # D13008, if you purchase additional hoses.
  view full answer...
• Will Derale Remote Dual Oil Filter Mount Kit , # D15707, Fit on 1999 Lexus RX300
  On the Derale Remote Dual Oil Filter Mount Kit, # D15707, it allows you to put your filter in a convenient location for easier oil changes. It is a dual oil filter, so it will give you additional filtration and increased oil capacity, it does not allow you to bypass the oil filter. I would also recommend the Derale High-Temperature Replacement Hose for Engine Applications - 25' Long, # D15799,and the Derale Stainless Steel Hose Clamps (4 Piece), # D13008.
  view full answer...
• Recommended Transmission Cooler and Parts Needed for Installation on 2011 GMC Sierra
  For your 2011 GMC Sierra I recommend using a Derale 10,000 Series Stacked-Plate Cooler with -10 AN Fittings, like # D52510. I spoke with my contact at Derale and he said these coolers are popular among Allison transmission owners. When choosing a transmission cooler, the largest cooler that will fit in the space available in your engine compartment is typically the best. Generally speaking, the larger the cooler the better the cooler performance. A stacked-plate cooler is the most efficient...
  view full answer...
• Fluid Leaks After Installing the Derale Adjustable Fan-Control Thermostat # D16769
  It is surprising to hear your hose is leaking after installing the Derale Adjustable Fan-Control Thermostat, # D16769. We have not received any complaints for this product. I spoke with my contact at Derale and he said there are only a few things that typically cause leaking with this thermostat. First, make sure the included foam pad is placed over the capillary tube. Next, look at the type of hose clamp you are using. If you are using a clip, I recommend replacing it with a screw type...
  view full answer...
• How Long is the Hose in Derale Engine Oil Cooler # D15405 for a 2014 Ram 1500 5.7 Liter
  The Derale oil cooler # D15405 comes with 10 feet of 1/2 inch hose. You could add another 10 feet using # D15700. Then you would just need a 1/2 inch line to 1/2 inch line hose barb fitting from an auto parts store and some additional hose clamps # D13008. For transmission cooler # D13503 there are no special fittings required for installation. But if the included Insta-dapt fitting does not fit your external transmission cooler and the stock lines are metal you would need to cut and flare...
  view full answer...
• Transmission Cooler Recommendation for 2012 Ram 3500, 6.7 Cummins with 6 spd Automatic
  The best way to install a supplemental transmission cooler in line with a factory transmission cooler is to put the supplemental cooler after the factory cooler. To do that you will need to determine which of the lines from the factory cooler is the outlet. To do that you will want to start your truck when its cold, put it in drive for about 10 seconds with the brake on, put it back in park and shut the truck off. Next you will want to grab both transmission lines feeding into the cooler....
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...
• Larger Hose Fittings for Derale # D13611 on 2010 Mercury Mariner
  On the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient # D13611, the fittings that come with the unit are 1/2" NPT x 3/8" hose barb. The other option for fittings are the Derale 1/2" NPT Male x 1/2" Barb Straight Hose Fitting - 2 Piece # D15712 along with the 1/2 inch inner diameter hose # D15700 and hose clamps # D13008. This slightly larger size is the only other option for the 1/2" NPT fitting on your cooler.
  view full answer...
• Transmission and Power Steering Cooler Recommendation for a 2005 Honda Odyssey
  Since you are planning on buying a transmission cooler like the Derale Transmission Cooler, part # D13502, I would consider purchasing the Derale Combination Cooler Core, part # D15321. This cooler can be used for cooling both the transmission fluid and the power steering fluid on your vehicle in one compact package, see photo at right. You will need to measure to decide if you will be able to mount the transmission cooler first. The dimensions of the Derale Combination Cooler Core are...
  view full answer...
  
• Can Two 40 Row Derale Transmission Coolers be Used in Place of a Factory Cooler
  Yes! You can use 2 of the Derale 40-row coolers # D54008 to cool the transmission fluid on your prostreet car. The stacked plate design is the most efficient at cooling. To optimize cooling make sure the coolers are mounted where they can get the most air flow (right behind the grille). I also recommend a couple of mount kit # D50020 and some hose. For a 25 foot length with an inner diameter of 11/32" use # D13007. For 25 feet of a 3/8" diameter use # D13017. We also have a 4-pack of stainless...
  view full answer...
• Can I Mount Derale 10-Row Stacked-Plate Cooler to Bumper of 2002 Jeep Liberty
  I spoke with my contact at Derale and he confirmed that the Derale 10-Row, High-Performance, Stacked-Plate Cooler # D51008, which you referenced, is a fit for your 2002 Jeep Liberty and can be mounted to your front bumper. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Parts Needed to Mount a Transmission Cooler on a 1999 Toyota Camry
  Derale Series 7000 Tube-Fin Cooler Core # D13317 is just a core, not a kit, so it does not include mounting hardware, hose, or fittings. The kits can be found in the link provided and do include all of these items. Since you already have the core though you will not need another kit. The kits include the following parts: Hose clamps, # D13008 Hose, # D13003 Universal mount kit, # D13001 Insta-Dapt fitting, # D13004 These are the parts you will need.
  view full answer...
• Will the Derale 25-Row Stacked-Plate Cooler Fit a 2005 Chevy Silverado 2500
  The stacked-plate transmission coolers like the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 do offer superior cooling power when compared to plate-fin and tube-fin designs. However, they are also much thicker at 2" which means you will need to make sure you have this much depth in addition to the length and height of 13" wide x 9-3/16" tall. There should be plenty of space behind your grille for this cooler so I don't think you will have any issues....
  view full answer...
• Most Efficient Transmission Cooler Recommendation for 2015 Chevy Silverado 1500
  The most efficient style of transmission cooler is the stacked plate style like the part # D54012 that you referenced. So for the largest one in this style you'd want the # D54010 which measures 13W x 13-7/8T x 2D Inch and you'd have an extremely efficient cooler. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Small Transmission Cooler Recommendation for a 2013 Ford Explorer
  The cooler that comes with the part # D15602 can be used as a transmission cooler for your 2013 Ford Explorer. Since you do not need the oil cooler parts that come with it you would be better off ordering the part # D51008, two of the part # D98202, rubber hose # D15799, and hose clamps # D13008.
  view full answer...

Do you have a question about this Accessories and Part?