Custom Fit 2013 Nissan Titan Accessories

Currently the only compatible option we carry for a 2004 Toyota Tacoma is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2306 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLR3500. Happijac unfortunately doesn't…

The Bauer Products Camper Door Lock #BA54FR would work as a replacement for what you have now. It's the exact size you are needing.

Your Titan would've been factory equipped either with or without the 7-way trailer connector. If there's indeed a connector on the rear, it would be the 7-way. There's a few ways you can go about doing this. The easiest option would be to…

You will need to replace the 3-way connector you have on your trailer with a 4-way. I am not sure why the guy sold you a 3-way as that would be a very non-standard wiring setup. The green wire circuit is most likely your right turn/stop and the brown…

What you can do is to use the Quick FixTM 4 Pole Flat Car and Trailer Ends, #48195, and not use one of the pins since you only have three wires that need to be connected. You can then use the wire you need inside of them as needed. The wires that run…

You can wire the Hopkins 7 Way Molded Trailer Plug #HM20048 in whichever manner you see fit- the colored wires in the loom are color coded to make it easy for you to know which pin/blade they're connected to, so you shouldn't need to…

My technical contact at Titan confirmed that the silver cover plate needs to have the side with the raised rim facing down into the cylinder. After you insert the fill cap into the cover plate, the fill cap should sit flush on the smooth (non-raised)…

We do carry the wiring harness you need. For a 2004 Nissan Titan that does not have a towing package, you will need the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector, #N40975 that you have referenced. The harness comes with the…

Based on the colors of the wires you have you could pretty easily wire a 4-way to your trailer. The part #A35W42B would work well. You would just need to match the colors of the connector to the wiring of your trailer. All of the whites would need to…

The #N40975 Trailer Wiring Kit will include detailed instructions on how to install this part and the associated relays. There is a relay panel under the hood, in the engine bay, by the battery on the passenger side. If you remove the cover you will…

We do have some magnetic lights that operate on batteries. They're technically emergency lights but they have a constant shine setting. Of course they will not operate as brake or turn signals which I cannot recommend you tow your trailer…

It sounds like you are using a wishbone harness to re-wire your trailer. A wishbone connector has a brown/green wire for the running lights on the right side and a yellow/brown wire for the left side running lights. You will also have a yellow wire…