Custom Fit 2010 Volvo XC60 Accessories

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56355 you referenced is a compatible fit for your 2016 Volvo XC60. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in…

The #118739 Tekonsha T-One harness and #C56355 Curt T-Connector harness are both custom fit for the 2017 Volvo XC60. The installation is the same for both. The Curt has a powered converter using SMT and the Tekonsha has a powered ModuLite…

For an exact replacement you'd want the part #TLL12RK as I looked up the J-67 and that's exactly what these are. Trailer lights are often made by several companies to the same dimensions etc and this is an example of that.

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

Don't worry. Since you know and trust your local mechanic who did the hitch install, chances are that the rattling noise you're now hearing after hitch installation is simply the fairly common issue of the muffler coming into contact with the…

With the brake controller gain turned all the way up, you should be seeing closer to 12-volts at your trailer connector. You are losing voltage somewhere between the brake controller and the trailer connector. I am assuming that by electric brake…

There may be a combination of the Curt Trailer Hitch Receiver, Item #C11522, with a draw bar like the Curt Drawbar - 5 inch Rise, Item #C45014, that will get you the right ball height. To find what you need, start by measuring from the ground to the…

Since we know the Odin roof boxes are rebranded Thule boxes the lid lifter you are looking for is the part #TH14936 that you referenced.

The Thule Replacement Lid Lifter Hinge #TH14936 that you referenced can fit on either the left or the right hand side of a cargo box. They are "ambidextrous". On one side they fold in and when on the other side the fold out.

Thanks so much for the photo and the info on your cargo box model. I'm not 100 percent certain which part you are referring to, so I will list all of the available replacement parts for your Thule Atlantis 1600XT cargo box, which I confirmed with…

To mount your older Thule Alpine Cargo Box onto the factory crossbars of the 2017 Chevrolet Suburban you can use the Replacement QM3 Hardware #TH04997. You will need to drill some new holes in the cargo box but the QM3 includes stick on hole covers…

There is not a special tool that is needed to install the Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936, however you're right it can be a bit tricky. What you're going to want to do is, with a set of needle nose pliers…