Yakima Spare Tire Bike Racks Review - 2007 Jeep Wrangler Unlimited Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

Here is the Roadmaster Direct-Connect Base Plate Kit #1444-3 which Roadmaster said to use for your 2017 Jeep Wrangler Unlimited Rubicon. This comes with the arms for a Roadmaster Tow Bar #RM-676. If you are using a Blue Ox Tow Bar #BX4370 you will…

The etrailer tow bar part #e37ZR is manufactured for us by Demco here in the USA.

To add a 7-Way/4-Way combo vehicle connector to your 2017 Jeep JK, I recommend the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Gary, the Hopkins tow bar lighting kit part #HM56200 that you referenced carries the stoplight circuit so the brake lights of the Jeep you have it installed in will still function regardless of if you have a braking system pressing the brake…

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

Your 2017 JK Wrangler won't have the connector at the rear for the #42145 unless it was equipped with the factory tow package. No worries, though. We can make this happen with a minimum of hassle, though it's not quite plug-and-play.…

Looking at the pictures of the Blue Ox base plate kit part #BX1134 installed compared to the bumper pictures you sent in of your 2016 Jeep JK Wrangler Rubicon with the Smittybilt Gen 1 bumper this base plate kit would fit.

Yes, the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR would have enough adjustability between the 1-1/2" shank rise/drop and the 3" of tilt to meet your 4" difference. I've attached a video below where Dave will…

For the etrailer tow bar part #e37ZR there are adapters to allow it to be used with other brand base plate kits. For Roadmaster you'd want the part #e98974 for a crossbar style base plate or #e98975 for a direct connect. For a Blue Ox base plate…