Erickson Stretchable Truck Bed Cargo Net Review Video

I went out into our warehouse and pulled an Erickson ATV Cargo Net - 28 inch x 28 inch, part #EM01014, to measure. When the net is completely stretched out the dimensions are 52 inches in width by 59 inches in length, with a diagonal measurement of…

I have the perfect net for you. I recommend the Curt Cargo Net #c18202. I have included some measurement diagrams of the net and hooks. Check them out!

I went out to the warehouse and pulled Curt cargo net #C18201 to measure the hook openings. There is also a hole in the hooks so I measured it as well. The hole is 0.72 inches in diameter. And the hook opening is 0.93 inches wide. Even if the hooks…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…