Custer LED Safety Light Review Video

In order to swap your surge brakes to electric over hydraulic, you're going to need to change out your actuator and add a proper brake controller. For an actuator I'd recommend going with the Hydrastar Electric Over Hydraulic Actuator for…

We do have some magnetic lights that operate on batteries. They're technically emergency lights but they have a constant shine setting. Of course they will not operate as brake or turn signals which I cannot recommend you tow your trailer…

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

We have two options that are exactly what you are looking for with the part #AM30630 which is a Load Range C 4.80-12 on a galvanized wheel with a 4 lug bolt pattern or the part #AM30670 for a 5 lug wheel.

It sounds like you may have damaged the bearing and more than likely the spindle as well. If the spindle is scored or damaged I recommend replacing the axle. A bearing should just slide onto the spindle with little effort and should not be hammered…

The Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel part #AM30620 is a great replacement option with 65 mph speed rating and 4 on 4" bolt pattern. If you want to go higher than 65 mph then you would need to upgrade to a much larger…

The part #RG06-050 that you referenced is a double lip seal that has the metal spring that runs around the lip to hold it tight to the spindle.

You are correct, the Grease Seals 10-19 pair, part #RG06-050, are the direct replacement for the Timken seals 171255. You can view some additional information on replacing trailer hub components at the links provided.

Based on your bearing numbers the correct grease seal set you would need would be the Grease Seals part #RG06-050.

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…