ClearPlus Windshield Wipers Review - 2022 Ram 1500 Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

Your slide-in truck camper does not have electric brakes so the blue brake circuit wire from its 7-way connector is not used. All other lighting functions as well as 12V auxiliary power will be maintained on the other circuits. Please refer to the…

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

There is a front-mounted trailer hitch receiver that fits a 2006 Dodge Ram 1500, though the correct one will simply depend on the cab that you have and the model. I will list out the fits so you can find exactly what you need for your truck. - 2006…

The Draw-Tite Front Mount Trailer Hitch Receiver part #65046 is designed to sit flush with the underside of the lower bumper fascia skirt on a 2003 Dodge Ram 3500. I have attached a photo which shows this. It sits as close to the underside of the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Go Power 100-Watt Solar Flex Kit #34272630 includes a digital controller and so does the 80-Watt Eco Kit #34272627. Since you need only one controller I suggest adding the expansion panel to avoid having duplicate parts. You can use the Go Power…

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…