B and W Companion OEM 5th Wheel Trailer Hitch Review Video

For your 2017 Ford F-350 dually with the factory hitch prep package the B and W Companion Slider part #BWRVK3370 is a confirmed fit and would work well. It's not going to fit with you welder and tool box though so you'd have to remove them to…

Based on the picture you provided of the measurement from the back part of the bed to the edge of the pin box is about 18-3/4" you will be able to use the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

The correct lube plate for a B&W Companion 5th Wheel Hitch is the Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 which is 10" diameter x 0.192" thick.

I attached a link on this page to the owners manual/install instructions for the Demco Hijacker Autoslide 13k hitch part #DM8550040 that you referenced for you to check out.

There is going to be a bit of movement with the kingpin inside of the locking jaws on the B&W Companion OEM 5th Wheel Trailer Hitch part #BWRVK3370 as it does need to rotate while turning but there aren't any adjustments for this. That said,…

The B&W Companion OEM 5th Wheel Trailer Hitch w Slider #BWRVK3370 that you are considering is actually the exact hitch I recommend for your Ford F-350. The B&W Companion hitches are widely considered to be one of the best units on the market…

The B and W Companion Hitch part #BWRVK3300 would fit the puck system of your hitch prep package on your 2015 Ford F-250 short bed, but since this is a stationary hitch you would need a Sidewinder pin box to be able to use this hitch and still be…

Although a sliding hitch is usually called for with a 6-3/4 ft box, a stationary Companion that mounts in the underbed pucks (NOT the hole for the gooseneck ball) like the #BWRVK3300 you mentioned would work with a short bed truck as long as a…

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

The total weight of the B and W Companion Slider Hitch part #BWRVK3370 that you referenced is 266 lbs.