Draw-Tite Max-Frame Trailer Hitch Installation - 2022 Subaru Forester Video

The Draw Tite hitch #76271 definitely does fit your 2023 Subaru WRX and when we installed it we found that the distance from the bottom of the hitch to the ground measured right at 11-1/2 inches. From the center of it's hitch pin to the…

Good question, and the Curt Trailer Hitch Receiver #C84ZV that fits your 2022 Subaru WRX will come out underneath the bumper and not through a bumper cut out. Curt doesn't have a great photo of this installed, so I added a cut out below from…

The Curt Trailer Hitch Receiver part #C13409 is a better option to carry a cargo carrier (or other accessories like a bike rack) especially with a steep drive way because it provides about an inch more ground clearance compared to the Draw-Tite…

The EcoHitch Hidden Trailer Hitch Receiver item #306-X7391 is a more premium hitch than the Draw-Tite Trailer Hitch item #76271. While both are confirmed to fit the 2020 Subaru Forester they have completely different installation methods which is…

When installing the Curt Hitch Receiver #C13409 to your 2020 Forester that hole is enlarged so the grommet will not fit back in the hole. This does allow some dirt or debris inside the frame rail, which is standard on most vehicles. It is not a…

While the Curt #C13409 and Draw-Tite #76271 both have a 525lb tongue weight, 3,500 maximum gross trailer weighting and 5/8" pin hole with similar safety chain openings and ground clearance, there are some differences. The Draw Tite #76271 is…

I would be happy to help. I checked with our vendors and the only hitch available for a 2022 Subaru WRX is the Draw-Tite Hitch item #76271. This hitch is custom fit and bolts to your Subaru with included hardware. If splicing is a no go for you, I…

You sure can. I've attached the picture of the Curt #C13409 on your 2021 Subaru Forester. I've also attached a video of the complete install. So now you know what it looks like and how to get it on there.

I agree that while it is up to the consumer and either way is the correct way to do it in the end that when installing the Curt Trailer Hitch Receiver part #C13409 that the heat shield should be re installed. If for no other reason just to add a…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76271 will fit and work great for your 2022 Subaru Forester whether you have the base model or the Wilderness. The only thing to keep in mind is that you do need new hardware as hitch hardware is only…

For your 2020 Subaru Forester the EcoHitch part #306-X7391 has the distinct advantage of being most hidden which gives it the least visible look and better ground clearance. The Draw Tite #76271 costs considerably less and installs a bit easier but…

I reached out to my contact at Kuat, and sent him the picture you attached, and he said that what you are seeing is actually pretty common when using the Shank Adapter #D101. He said the hitch pin holes will indeed be a bit off center when using the…