Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Subaru Crosstrek Video

We can definitely set you up with a hitch and wiring for your 2024 Subaru Corsstrek Hybrid. To answer your first question, unfortunately there is not a plug-and-play wiring harness for the Hybrid model at this time (January 2024). We do have a wiring…

The Draw-Tite #76209 fits all models of the 2024 Subaru Crosstrek, including the Wilderness. If you have the hybrid then this hitch is the best and only choice. If you do not have a hybrid then I recommend the etrailer #e98912 instead. Unlike the…

I do have an option for you but the EcoHitch Stealth Trailer Hitch Receiver part #306-X7365 has not yet been tested on a Plug-In Hybrid (PHEV) model therefore, I cannot confirm fit. The only trailer hitch for your 2019 Subaru Crosstrek that is a…

Yes, for your 2020 Subaru Crosstrek Plug-In Hybrid I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76209 that's confirmed to fit and will work perfectly. This durable hitch features custom brackets that line up to existing…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76209 is confirmed to fit all models of the 2021 Subaru Crosstrek, including your Hybrid. This is a Class III hitch with a 2" receiver that will be perfect for any accessories or light towing you…

Draw-Tite only tests the fitment of their Max-Frame Trailer Hitch Receiver #76209 on the stock exhaust that comes on your 2023 Subaru Crosstrek. I have linked an installation video of the receiver being installed so you will be able to compare it…

Yes, the Draw-Tite trailer hitch does indeed fit both the hybrid and non-hybrid models of the 2023 Subaru Crosstrek. The correct part number for the hitch is the following: - Draw-Tite Trailer Hitch Receiver #36644

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The etrailer.com Trailer Hitch Receiver part #e98912 which is a fit for your 2019 Subaru Crosstrek uses 1/2" carriage bolts. In some cases, you will need to slightly enlarge the frame holes in order to use this bolt size. That said, there is no…

For the Yakima EXO kits they offer a swing base with the part #Y34VR that will allow you to swing the rack away from the rear of the vehicle to access the rear door. Since the light kit part #Y74VR attaches to the rear of the rack it would swing away…

I've attached some photos so you can see how the #e98912 is going to look like after you install it on your 2020 Subaru Crosstrek Limited. These photos were submitted by another Crosstrek Limited owner who confirms it's a perfect fit and as…