Titan Chain Diamond Alloy Snow Tire Chains Installation - 2019 Kia Sorento Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

Since you have a Dometic AC unit the best option to replace it from Advent would be the part #ACDOM135 which was designed for this exact situation and would allow you an easy install since the electronics would plug right in.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

We have a similar set of Titan twist link tire chains that fit your tire size of 265/75-16 with the part #TC2228 but the size you mentioned would not fit so you would not want to go with them.

Hey Roy, yes it does look like the Titan Chain Snow Tire Chains #TC2851 you're looking at will fit the tires on your 2023 Entegra Coach Anthem; have fun on your trip!

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not. If you check out the attached picture you can see what wiring will be in this location for the tow package…

In order to install a 5-Way connector on your 2019 Kia Sorento you will need to start with a 4-Way harness if you don't already have one. For this the Curt T-Connector #C56332 will work perfectly if the Sorento is equipped with the factory tow…

If your 2019 Kia Sorento has the factory tow package then I recommend starting with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C56332 which will connect to the wiring harness located along the…

To determine if your 2020 Kia Sorento has a towing package you'll need to remove the sidewall panel just behind the rear driver's side wheel well. Inside you'll find a wiring harness connector that will allow you to plug in a tow package…

Absolutely, you can check just behind the rear tire on the driver's side of your 2019 Kia Sorento, on the outside of the frame rail. The factory connector, if present, will look like the one in the attached photo (B). Note that you will need to…