RoadMaster Falcon Tow Bar Installation - 2014 Nissan Versa Video

You can certainly add a 7-way trailer connector to your trailer with 6 wires. You would simply have 1 pin on the 7-way connector that did not function. I recommend adding a 7-way molded trailer wire connector like part #H20046, and a junction box…

I can confirm that a vehicle with LED lights can absolutely use the Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR.

For flat towing a 2011 Nissan Versa, You will need a base plate kit, tow bar, safety cables, wiring, supplemental braking system, and a possible high-low adapter. I have attached my recommendations on each of the following below. Flat-Tow Wiring:…

If you wanted just the breakaway cable and switch for a Roadmaster supplemental braking system you could use the #RM-8603 for the cable and then part #RM-650898 for the switch.

The Roadmaster EZ Base Plate Kit with removable arms, #52347-1 you refer to is a confirmed fit for the 2011 Nissan Versa, all models no exceptions listed. However, according to the online version of owner's manual for 2017 Nissan Versa, if the…

When on a tow dolly the vehicle steering wheel should be locked so its wheels cannot turn. The dolly likely has a steering lock out or pin on it that you would have to remove or disengage so that the dolly can pivot while the vehicle is on it. That…

A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

To install the RoadMaster 6-Wire Trailer Connector, part #RM-910030-7, you will need a bracket. The bracket I recommend is the Roadmaster Bent Electrical Socket Bracket, part #RM-910030-5. You need to find a flat surface that can support the…

We have exactly what you need for the repair kit for your Falcon 2 tow bar: - Complete Repair Kit for Roadmaster Falcon 2 and BlackHawk Tow Bars #RM-910003-60

The Roadmaster Tail Light Wiring Kit for Towed Vehicles #RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at…

Roadmaster uses a specific connection style for their locks, so for a lock set that would lock the base plates to the vehicle and the tow bar to the hitch of the tow vehicle you would want part #RM-304 or part #RM-302 for just the base plate locks.…