Roadmaster Tow Bar Extended D-Ring Bumper Mounts Adapter Install - 2016 JeepWrangler Unlimited Video

We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow…

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

I believe you are asking about the inside depth on the Blue Ox D-Ring adapter #BX88357, which is 1-5/8 inches. I've attached a photo along with some other measurements for you as well, but if the Warn bumper on your 2012 Wrangler Rubicon is an…

The etrailer tow bar part #e47ZR is the most similar to a Demco Commander II tow bar part #DM9511012-BX which also fits the Blue Ox tow bars. Functionally you'd have very similar flat towing experiences with these or the Blue Ox Alpha part…

It is possible for you to use the D-rings on your 2015 Jeep Wrangler bumper with the Roadmaster Falcon 2 Tow bar part #RM-520 with the adapter part #RM-035-1 if your D-rings are 1" thick or part #RM-035 if your D-rings are 3/4" thick. I…

Since everything on your Roadmaster Falcon 2 tow bar still functions, it sounds like you just need the Complete Repair Kit for Roadmaster Falcon 2 and BlackHawk Tow Bars #RM-910003-60 to replace the bushings and springs. This will help you get things…

I spoke to my contact at Roadmaster and they informed me that the issue you are having is more than likely a worn out bushing. The inner arms are made of stainless steel so rust would not be the issue. In order to get the tow bar back up to speed you…

Yes the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM65FR would work with your Eagle 8000 Roadmaster tow bar.

We don't have a confirmed fitting baseplate for a Smittybilt XRC bumper, but since it has a D-Ring mounts you could reach out to Smittybilt and see if this bumper is rated for towing from the D-Rings. If so then you would just need to measure the…

I went ahead and contacted my tech at Roadmaster, and he confirmed that while he doesn't have the exact measurement below the bumper where the Base Plate #RM-521424-5 installs on a 2004 Jeep TJ, he did confirm that the pins on the baseplate sit…

The steps you have are what the Replacement Double Ball Joint for Lippert Electric Coach Step #LC388220 is designed to fit. If this is the part that broke on your steps this would be the correct replacement part.

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…