Roadmaster Brake-Lite Relay Kit Installation - 2008 Honda Fit Video

I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find…

I spoke to my contact at Blue Ox and he informed me that the Blue Ox Base-Plate-to-Tow-Bar Lock #BX8859 that you referenced has a capacity of 10,000 lbs and has a plated steel finish, not quite chrome but close.

Yes, the Blue Ox Base Plate #BX2253 will work with the Alpha Tow Bar that you have or its newer Alpha 2 #BX7380. I suggest consulting your owners manual/manufacturer to ensure your specific 2011 Honda Fit is capable of being flat towed. You will need…

There's not an available 7-way to 4-pole flat umbilical like what you're looking for, but I do have some easy solutions for you. The Hopkins Nite-Glow 7-way to 5-way flat coiled adapter, part #HM47025 will work with either a 4-pole or a…

The base plate has mounting points for either a 6 or 4 way round connector to attach, but the connectors aren't included with the base plates. I'd recommend cutting off the 4-pole flat provided by the Hopkins #HM56302 flat towing wiring…

The Roadmaster EZ Base Plate Kit, item #521190-1, is the base plate kit you will need for your 2009 Honda Fit. With this base plate kit you will need a tow bar and safety cables and tow bar wiring for your vehicle. If you are towing infrequently, you…

I attached a picture of the wiring diagram for the Demco SBS Stay In Play Duo part #SM99251 that you referenced.

The best charge line kit for flat towing your vehicle is the Roadmaster Battery Charge Line Kit #RM-156-25. I have a hard time not recommending all things Roadmaster when it comes to the wiring for a flat tow system because of how much research…

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

In order to use an NSA Ready Brute Tow Bar with a Roadmaster Direct-Connect Base Plate Kit, you need the Roadmaster Clevis Connectors part 857768004296 which have 3/4" pins. I have attached a list of other parts you will need below as well for a…

The correct way to wire up the breaker that comes with the Roadmaster charge line kit part #RM-156-25 is to have the copper post ran to the positive post of the battery that is charging the other vehicle and the silver side to the battery that is…

Vehicles with separate taillights can be wired for flat towing like a combined vehicle with a diode kit like the #RM-15267 and the brake lights will flash like turn indicators when blinkers are on and the brake signal will not override it. This is…