Base Plate Wiring Harness Installation - 2010 Honda Fit Video

When using Hopkins tow bar wiring harness #HM56300 you can use Roadmaster Fuse Bypass #RM76511 if you do not want to have to pull fuses when towing the car. It is not essential but it will make life easier. Please see the linked installation video.

The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center #41946 is a confirmed fit for the 1996-2018 Chevy Express and GMC Savana Vans. There is not a confirmed fit for any E450 models, but I did measure the hitch as you requested to see if…

I spoke to my contact at Blue Ox and he informed me that the Blue Ox Base-Plate-to-Tow-Bar Lock #BX8859 that you referenced has a capacity of 10,000 lbs and has a plated steel finish, not quite chrome but close.

Yes, the Blue Ox Base Plate #BX2253 will work with the Alpha Tow Bar that you have or its newer Alpha 2 #BX7380. I suggest consulting your owners manual/manufacturer to ensure your specific 2011 Honda Fit is capable of being flat towed. You will…

There's not an available 7-way to 4-pole flat umbilical like what you're looking for, but I do have some easy solutions for you. The Hopkins Nite-Glow 7-way to 5-way flat coiled adapter, part #HM47025 will work with either a 4-pole or a…

The base plate has mounting points for either a 6 or 4 way round connector to attach, but the connectors aren't included with the base plates. I'd recommend cutting off the 4-pole flat provided by the Hopkins #HM56302 flat towing wiring…

Your weight distribution system, #EQ37120ET, is rated for a total tongue weight of 800-1200 lbs. That total tongue weight is the loaded tongue weight of your trailer as well as any cargo behind the rear axle of your tow vehicle. I've attached an…

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

If the vehicle you are towing with has separate stop and turn signals then it will need to be wired with a Modulite converter so that it can run the lights on the vehicle you are towing that does not have separate turn signals and stop lights. If the…

The Blue Ox Replacement 9-Terminal Diode Block #BX8863 is best installed in the rear of the towed car since this will keep it closer to the car's taillight wiring. Placement here will also protect it from exposure to the elements.

I found an online copy of the 2008 Honda Fit owners manual and on page 173 it states that the vehicle can be towed behind a motor home up to 65 miles per hour. It then lists the procedures for automatic and manual transmissions in the pages after…

The Roadmaster EZ Base Plate Kit, part #521190-1, does not include the RoadMaster Quick Disconnects, part #RM-222. These car side quick disconnects will bolt to the EZ base plates on your 2011 Honda Fit and allow the crossbar from your Falcon 2 tow…