Roadmaster EZ Base Plate Kit Installation - 2011 Jeep Liberty Video

Flat towing a vehicle requires specific equipment to tow the vehicle safely and in accordance with local, state, and federal laws. A front mount hitch is not suitable for use to flat tow a vehicle behind an RV but I can tell you all of the parts that…

I verified with Roadmaster with the correct base plate fit for your 2011 Jeep Liberty Sport without a rock guard, and it is different than the part you mentioned. The correct is the following: - Roadmaster EZ Base Plate Kit #521433-1 According to…

I have seen this reported before and there is actually a note in the installation instructions on your Curt Front Hitch #C31020 where it talks about removing the oil filter and the interference with the front hitch. According to Curt, you must…

You want to make sure the hitch ball is out past the furthest point of the truck. An 18 inch extender like the Curt #C45796 will reach most of the way to the edge of the truck. Then any ball mount will make up the rest. We have a ball mount kit,…

In order to flat-tow a second generation (2008-2011) Jeep Liberty with all four wheels on the ground you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have…

In order to use a Roadmaster Tow Bar On a 2010 Jeep Liberty like the Falcon 2 Tow Bar part #RM-520 you'll need the Roadmaster EZ Base Plate Kit part #521433-1. In regards to the wiring, I recommend the Hopkins Custom Tail Light Wiring Kit for…

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56204 is a confirmed fit for your 2011 Jeep Liberty. It has integrated diodes to prevent feedback for safe operation and plugs right in to your victory wiring and the tail lights of your…

You will need to use Base Plate Receiver Covers, #RM-210, because the inner diameter of the holes is 1-1/2 inches. I have also included a link to the installation instructions for the base plates for you and a helpful link to our series of articles…

I attached a set of pictures that detail how to remove and reinstall the inner arms of your Roadmaster Sterling #RM-576. When I spoke to my contact at Roadmaster about a similar cleaning question he recommended that once you get the arm out you will…

For the part number 35043100 it appears you are looking for the Replacement Hardware Kit for Roadmaster Base Plate Kit, #RM-521433-1HK. Part numbers C001588 and C001589 are the removeable arms on the Roadmaster EZ Base Plate Kit, #521433-1. To…

For the 2010 Jeep Liberty, we offer two different Roadmaster Base Plate Kits. Part #521433-1 will fit Limited or Sport Models not equipped with rock guards, skid plates, or brush guards. Part #521434-1 fits Limited or Sport Models with rock guards or…

What you have in your picture is a very old StowMaster Tow Bar #RM-501 which is still attached to some base plates. I reached out to my contact at Roadmaster who said the serial number from the StowMaster indicates that it is rated for 5,000 lbs but…