Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2008 Ford F-150 Video

You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part #EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will work for most…

The 2007 Ford F-150 either came equipped, from the factory, with a 7-way trailer connector or none at all. Since you don't have a trailer connector at all on yours you'll need to start by adding a 4-way connector like the Hopkins…

The 7-way wiring harness kits offered for your 2008 Ford F-150 are shown on the linked page and all include both the wiring harness portion and the trailer connector as well, such as PK11893-11932 from Pollak. Both of these use a standard round…

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

The "JJ" that you mentioned finding on the wheel size listed for the units mounted to your trailer refer to the contour of the bead seat on the wheel, essentially its shape ( "J" indicates the shape of the letter J). This…

To install a brake controller in your 2008 Ford F-150 you would be able to use the brake controller port under the dash and you will need to complete the wiring at the rear of your vehicle to the 7-way at the rear of the truck. For a brake controller…

If you are testing your Prodigy P3, #90195, while sitting still, then the readings you are getting are normal. The P3 is a proportional brake controller, so it will send out an amount of voltage proportionate to the braking intensity of the tow…

The FloTool RhinoRamps Vehicle Ramp Set #FT11909MI is intended for use when servicing a vehicle such as a car, truck, or SUV. This item is not intended for use as a trailer leveling device but we do offer these too. Andersen's Camper Wheel Chock…

Using an axle-less system will work for your trailer. There are some things you want to consider when using an axle-less system. You will want to make sure you install axles that have the same distance from the frame to the center of the wheel hub.…

The best solution that we have for you is to use the Timbren Axle-Less Trailer Suspension. These come with built-in rubber suspension that ease the installation process and work independently of each other for the best trailer ride out there.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

I recommend replacing both your axles and suspension systems with 2 of the Timbren Axle-Less Trailer Suspension Systems #ASR3500S06. This will allow you to bolt the assemblies to the trailer frame and still has the 4" drop like your current…