Inno Roof Rack Review - 2020 Mazda CX-5 Video

Yes, there is a roof rack that will fit your 2023 Mazda CX-5. This mounts directly to the side of your roof without drilling and has more than enough capacity for a bike rack. You will want the roof rack by Rhino Rack and it includes the following…

The fit kit has rubberized trim that fits to the contours of your roof and the legs attach to the kit, becoming the weather seal. If you remove the rack when it is not in use you have caps to put on the fit kit to protect the mounting hardware. The…

For your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars #INSUT. Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and…

The best roof rack for your 2023 Chevrolet Bolt EV is going to be the Roof Rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2 item #RRVA118B-2 RCL Legs for Rhino-Rack…

For you older version of the Thule Hullavator 897XT the only way to attach it to the top channel of aero bars is with the part #TH56JV. The #TH24BH is the channel adapter for the current version of the Hullavator part #TH898.

I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs #TH898 is compatible with both the Inno Crossbars #INB137 you were looking at…

The Malone Airflow 2 roof rack part number #MPG216 and would not need an adapter. While this carrier was replaced with the #TH898 which is a little more universal in what it can fit your version would still be able to fit around the Malone crossbars.…

According to the instructions for the Thule #TH897XT Hullavator, the kayak carrier is compatible with Thule square crossbars, Yakima round crossbars or Thule AeroBlade and WingBar crossbars that have the channel running across the top. It won't…

It sounds like you've got Thule Square bars already, and as long as you've not had any issues carrying 2 Hullavators #TH898 on those bars you can keep using them and you'll just need a set of towers that can be attached to the raised side…

No type of adapter will be necessary to use the Thule Hullavator #TH898 with WingBar Load Bars, as they will fit into the channels of those bars. For your 2011 Audi Q5 you can install the Thule WingBar Crossbars #TH711220 (Black) or #TH711200…

In order to install your older Thule Hullavator TH897XT the Thule aero WingBars, you are correct that an M6 x 30 is needed, as well as the nut and a washer. The exact parts are as follows: - Replacement Socket Head Cap Screw - M6 x 30 #TH919063054 -…

Yes, the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs TH897XT (NLA) can fit on both square-bars, as well as on the Yakima CoreBars, like the Yakima CoreBar Crossbar - Steel - Black - 70" Long #8880655. Attached are a couple…