etrailer Blue Ox Base Plates XHD Non-Binding Tow Bar Installation - 2022 Ford E-Series Cutaway Video

There are several components needed to flat-tow a vehicle like your 1993 Chevy Blazer. The first thing you will need is a base plate kit. For a kit that is confirmed to fit your vehicle you would want the Roadmaster Base Plate Kit #131-15. This…

An E3 error code on the Fogatti RV Tankless Water Heater #LSB64FR would indicate that the unit is going into overheat protection mode. Fogatti recommends cutting the power to reset the unit 1-2 times to solve the issue. If the issue isn't…

You are not overthinking this at all. The etrailer Invisible Base Plate Kit #e98948 actually has a built-in crossmember bar that strengthens it, while the Roadmaster one does not, which is why it needs more bolts to connect it to the vehicle's…

Our etrailer Invisible Base Plate Kit #e98948 for your 2021 Jeep Wrangler Unlimited uses the same style mounts as a Demco. So as long as your ReadyBrake tow bar has the Demco style ends they are compatible.

The etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates #e67ZR you referenced comes with the attachment pins and lynch pins to secure it to the base plate. Sometimes the pictures on the website don't show the hardware or miscellaneous pieces…

Yes, the etrailer #e67ZR tow bar is made for etrailer by Demco in the USA and has a lifetime limited warranty by etrailer. Demco parts will work on this tow bar, but Demco has no responsibility for warranty, repair, or service - you would need to go…

There are base plates and a light kit that fit your 2023 GMC Sierra 1500; the base plates are from Blue Ox and fit all models of '23 Sierra 1500, including your Denali. The correct part is the following: - Blue Ox Base Plate Kit #BLU35XR Then for…

Towing a vehicle requires a tow bar, base plate kit, wiring for taillights and safety cables. You should start with the base plate kit for the vehicle you will be towing. This is a custom fit bracket kit that attaches to the front of the towed…

I took a look at the maintenance instructions for the etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates item #e67ZR. There are no parts that have to be annually replaced. You will want to lubricate the latch trigger area of the extending legs…

For your 2021 Jeep Wrangler Sahara Unlimited you can use either the etrailer Base Plate #e98948 or the Demco #DM9519336 as long as you have the factory plastic bumper and you will be able to use reuse your existing Blue Ox Aventa II without needing…

I have a solution for you, but Demco Base Plates are not directly compatible with Roadmaster tow bars, so you will need to use an adapter; this doesn't have as much to do with the pin size as it does the way the tow bar connects to the base…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…