Draw-Tite Sportframe Trailer Hitch Installation - 2020 Toyota Corolla Video

From my research on your 2016 Nissan Altima, it is not recommended to tow a trailer or vehicle dolly. The trailer hitch receivers made for your vehicle like the Draw-Tite Sportframe Trailer Hitch Receiver #24796 you referenced are light duty Class…

While there isn't a locking pin for the lower portion of the EcoHitch Stealth Trailer Hitch Receiver #EH84GR the good news is this won't be a high-theft item at all for a few reasons. Most people would not assume that it comes off as…

According to the specifications of the Electric A-Frame Tongue Jack, #LC285318, from Lippert, the jack motor can draw a maximum of 30 amps at 12 volts. The closer to the capacity of the jack (3,500 pounds) the more power it will draw. I have…

The torque spec for the bolt part #7-103 is 106 ft lbs.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

We do have a video of the Curt Trailer Hitch Receiver #C11567 being installed on a 2020 Toyota Corolla Hatchback that I have linked below. While the Curt and Draw-Tite #DR94FR hitches are very similar you will want to be sure to follow the…

Yes! The Curt Hitch - 1-1/4" #C34UR is designed to fit a 2022 Toyota Corolla Hybrid sedan model.

We've got what you're looking for. The Curt Front Mount Hitch Receiver, part #C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the…

For your 2022 Toyota Corolla Sedan I recommend the Curt Trailer Hitch Receiver #C34UR. This is a Class I hitch with a 1-1/4" receiver. It has a 200 lb maximum tongue weight for your bike rack and a sturdy, square-tube design. This hitch has a…

Yes, the Curt Trailer Hitch Receiver #C34UR does indeed fit your 2023 Toyota Corolla hybrid. I have added a photo for you from a customer who was nice enough to send a photo of their Corolla hybrid using the Curt #C34UR.

The Curt hitch part #C34UR is a fit for all models of the 2021 Toyota Corolla including the hybrid sedan models so it would be a great choice. We've also found that Curt hitches have the highest quality control and most durable finish.

Even though it is not a fit for it, it is not impossible to install the #C92UR Trailer Hitch Receiver on a 2019 Honda Civic Si. However, in order to do this, you will need to remove the center mounted exhaust pipe. I have attached a few photos for…