Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Subaru Forester Video

The Thule OutWay Platform Trunk Bike Rack for 2 Bikes #TH65JV has a clamping system to secure the bikes that is adjustable along that U-shaped tube. The best way to see if your bikes will both fit okay on this rack is to stand them up next to each…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The 24x60 Curt Cargo Carrier for 2" Hitches, part #C18152, and the 24x60 Reese Cargo Carrier for 2" Hitches, part #63153, are extremely similar. In fact, in terms of the specs that you mentioned, neither stands above the other. I…

In order for you to realize more clearance under your trailer, using torsion axles with down degree angles will give you more clearance. On a system that has a 10 degree up axle, the center line of the spindle to the bottom of the trailer frame is…

We do have a front mounted receiver option that would work for your truck, but the Draw-Tite #65078 isn't a good fit for the Denali trim. The Denali front clip is different than the other trim levels, and in order to install the hitch major…

Yes, the Curt trailer hitch part #C13144 is a fit for your 2018 Subaru Forester with dual exhaust. We had a customer come back and leave a review saying it fit on their Forester XT with dual exhaust. I attached a picture of the review.

I wasn't able to find your order notes so I am not sure what hitch you have, but the Curt part #C13144 would be the one for your 2014 Subaru Forester that would stick out the most. From the center of it's hitch pin hole to the…

When we installed the Draw Tite hitch part #76182 on a 2017 Subaru Forester we found that there was 16 inches from the top of the hitch tube to the ground.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

If I am understanding your issue correctly, you need the Replacement 2" Hitch Adapter for Thule Doubletrack, Hitching Post Pro, #853-7489. And yes, you slide this on to the shank and screw it into place to hold it. That piece is what upsizes…

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

We have not yet had a chance to install a trailer hitch on a 2014 Subaru Forester with a factory trailer hitch but I took a look at how one installs and as you mentioned it does replace the rear bumper beam. Therefore, it would be smart to go ahead…