Curt T-Connector Vehicle Wiring Harness Installation - 2020 Ford Escape Video

When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot…

The etrailer Trailer Hitch Receiver #e89YR definitely does fit your 2020 Ford Escape. This is a perfect choice for carrying a bike rack, cargo carrier, or towing a trailer.

While the Draw-Tite Max-Frame Trailer Hitch Receiver #DT95MR will fit on a 2022 Ford Escape Hybrid it will not work on your PHEV. The PHEV is different from the standard hybrid and currently there is not a aftermarket receiver capable of fitting your…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your 2020 Ford Escape the Curt Class III part #C23FR is our most popular option that would work really well and would be a great option. It has a plenty of weight capacity, installs very easily, and is mostly hidden too so it looks great as well.…

Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the…

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

I suggest the Curt Trailer Hitch Receiver, #C23FR. This is a Class III - 2", custom fit hitch designed specifically for the Ford Escape. This bolt-on installation comes complete with needed hardware kit and installation instructions included.…

For your 2022 Ford Escape, I recommend the etrailer Trailer Hitch Receiver #e89YR. This hitch is rated for a 3,500-lbs weight capacity, and a maximum tongue weight of 525-lbs. For wiring I recommend the Curt T-Connector Vehicle Wiring Harness with…

When it comes to the Curt Trailer Hitch Receiver #C23FR compared to the Draw-Tite Trailer Hitch Receiver #DR47FR for your 2020 Ford Escape there are a couple of differences between the two that I'll go over for you. The first is the style, with…

The etrailer hitch part #e89YR that you referenced does fit the hybrid models and will still allow the hands free liftgate to function but you'd have to kick to either side of the hitch opening to activate it.

There isn't any drilling or hole enlarging required to install the Draw Tite #DT92RR that you referenced. I also attached a picture that shows the install instructions as well.