BAK Revolver X4s Hard Tonneau Cover Installation - 2022 Ram 2500 Video

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…

I reached out to my contact at Rhino-Rack and she reported that the Rhino-Rack #RRRLT600 legs will fit into RTC tonneau cover channels. Then you will need the Rhino-Rack #RRVA180B cross bars to fit into those legs.

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

The Rhino-Rack 2500 Load Bars that you referenced do have t-slots for roof rack accessories to attach to. Check out the picture I attached to see the dimensions of the t-slots. You can also attach accessories around the load bars as well. The…

I was able to reach out to my tech contact over at TorkLift to get some guidance on the installation of the TorkLift Front Tie-Down #TLF2022 for you. He mentioned that you'll want to apply pressure to the tie-down (pull it down a little bit)…

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2021 installs in line with the hinge edge of the fuel door on a 2022 F-250/F-350 so the turnbuckles would most likely prevent the door from fully opening, but should allow for enough…

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF2021 for the 2021 Ford F-350 Super Duty will come across the top side of the boards. Use TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF3008 for the rear of vehicle. Please note the…

You'd need new Torklift camper tie downs for your 2017 Ford F-350 as the fit from a 1996 F-350 is not the same. You'd need the part numbers #TLF2021 and #TLF3008 for your new truck since you do not have step bars and do have a factory…

The steel Torklift camper tie downs that fit your 2018 Ford F-350 long bed part #TLF2021 and #TLF3008 weighs 74 lbs total whereas the aluminum version part numbers #TLF2021A and #TLF3008A weigh 66 lbs so it's about 8 lb lighter.

The big difference between the Pace Edwards JackRabbit part #311-JRD7833 and Pace Edwards Switchblade part #311-SWD7833 for a 2019 Ram 3500 with 6-1/2' bed is that the JackRabbit can be locked open at intermittent points along the bed and…

The Pace Edwards SwitchBlade Hard Tonneau Cover #311-SWD7833 referenced in your question has a total weight of just under 70 pounds. Its aluminum constructed panels help to keep its weight down while also resisting any rust and corrosion over time.…