SuperSprings Vehicle Suspension - Front Axle Suspension Enhancement - SSF-111-54 Review Video

The SumoSprings I recommend for your 2020 Thor Axis, which is built on a Ford E-450 chassis are: - Rear Axle: SumoSprings Solo Custom Helper Springs #SSR-130-54 - Front Axle: SumoSprings Solo Custom Helper Springs #SSF-106-47 These will fit any of…

When installing the SumoSprings Solo Custom Helper Springs #SSF-106-47 you simply need to ensure you use jack stands to support your 2017 Ford E-450's frame so the front suspension hangs freely. It is not recommended or necessary to use Loc-Tite…

I have the perfect solution for your 2020 Thor Axis on a Ford E-450 chassis. I recommend using the SumoSprings Maxim Custom Helper Springs #SSR-106-54-1 (rear) and the SumoSprings Solo Custom Helper Springs #SSF-106-47 (front). These springs are a…

For suspension enhancement on your trailer you'll want a Timbren spring for trailers like #TTRA1702 which measure 2-3/4 inches high. I've also linked our selection of Timbren springs for trailers for you.

It sounds like you may need to look into the state of the suspension on your trailer. If there is so much movement that it has caused the tires to damage the fenders then something is not quite right. The Timbren springs like #TTRA1702 are designed…

The Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702 will be a great help in reducing body roll and helping dampen the bounce. Based on your measurements this will immediately take on load and stabilizing while…

The Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702 have a combined rating of 1000lbs, and not 1000lbs per spring. Since your leaf springs are supporting the weight on the axle, suspension enhancement like this…

The thickness of the #TLA7200 block itself is 2.25" in height. The height of the anti rock plate is 9/16" in height.

The TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 would be a great way to add suspension enhancement without utilizing your air bags. It prematurely engages the overload springs which means that you get more stability and…

If you already have Timbrens #TFRTT350J installed on your truck and are needing additional suspension support you might be overworking your suspension. The install of the #TLA7200 is possible and you will have additional suspension support, but we…

The part #TLA7200 might make your truck sit just a tad bit higher in the rear. Most likely not a noticeable amount but what you will notice is that the suspension won't dive down as far in the rear over bumps. In general it will feel much more…

If you find you need to trim the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 you have on your 2020 Ford F-350 I recommend using a reciprocating saw while lubricating it to keep from burning the rubber. We have found…