Review of Reese Fifth Wheel - Fixed Fifth Wheel - RP30921 Video

The Sunchaser awnings are made by Dometic. We do not carry the Dometic awnings, however we do have replacement fabric that will work. From what I found using the information you provided, it looks like you have a 16' awning. If that is the case,…

There is a difference in the thickness of the material used to build the center sections for the Reese M5 #RP30918 and Reese M5 #RP37FR as well which as the additional bolt in the 27k.

If your new 5th wheel trailer's GVWR (gross vehicle weight rating), which is the very most it can weigh when fully loaded for the road, is 18,000-lbs then I would be comfortable using a B&W 20K hitch. Odds are that you will not be routinely…

For your Reese M5 27k Hitch part #RP30922 the correct lube plate is the part #RP83001 that you referenced which is 10 inch in diameter.

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

The Lube Plate for Elite Series and Reese 5th Wheel Trailer Hitches, Item #RP83001, is designed to work with Reese fifth wheel hitches. I have attached a video review of the lube plate for you.

To my knowledge, the Reese Elite and Valley UBS (under bed system) were the only two manufacturers that offered a puck-style fifth wheel. If I recall correctly, the pucks were spaced differently. If you measure the center to center distance of the…

To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…

The Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package, #RP30895 has three hitch height settings of 14", 16", or 18", the top of the handle will set 4-1/4" above head of the hitch. However, if this causes…

Yes, the Reese M5 5th Wheel Trailer Hitch #RP30890 is compatible with the Sidewinder pin boxes. This hitch is actually made by the same company as Sidewinder. I attached a help article on Sidewinders for you to check out as well.

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

The Cargo Management System is an option that GM offers for their trucks that includes tie-down rails installed on the walls of the truck bed to help secure cargo. If you are not familiar with the Cargo Management System, then it is likely that you…