Lippert Components Accessories and Parts LC3452072 Review Video

The Solera #LCV000168328 you'd looked at would be the correct slide-out topper for the 135 inch slide-out dimension you provided. This particular topper is designed for sliders measuring between 134-139 inches in width. The awning itself is 139…

The amount of times you'd need to wind a Solera awning when installing it is 14 times. The part number you have 285148 matches up with the #LC87FR.

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

For replacing the Drive Head #LC34FR and Idler Head #LC87FR on a Solera Slide Topper you will want to completely remove the slide topper from your RV/Camper. You will need to insert a pin into the end of the tube end cap(see image) to keep the…

More than likely the issue is coming from using a 4-wire switch #LC117461 on a 5-wire set-up. We do have a 5-wire switch available, which will allow you to wire it up how it needs to be wired. - Lippert Slide-Out Switch Assembly #LC117460

I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning -…

The awning arms are measured from top to bottom of the wall mount. This can then be used to select the correct length replacement. I have attached a photo below to assist. You will also need to pay attention to the style of arms such as pitched or…

According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like #LCV000163285 is between 12 to 16 turns, so I'd consider 14 to be a pretty good happy medium.

There isn't a left or right hand version of the Replacement Idler Head and Roll Tube part #LC87FR that you referenced.

The Solera RV Slide-Out Awning #LCV000163298 fits RVs with silde-outs 140" - 145" wide and up to 48" long. It is also available in black with part #LCV000177334. I have attached an installation video below along with a working…

The Lippert Slide-Out Switch Assembly - White #LC117461 is a four wire switch. I reached out to Lippert and they confirmed that its is a 4 wire switch. The Lippert Slide-Out Switch Assembly - Black #LC117460 Is a five wire switch. They both will work…

If you take a look at the accompanying photo, you can see the correlations between color and function of the Lippert Components Slide-Out Switch Assembly - Black #LC117460. The black wires are ground, red is power, yellow is extend, and green is…