Review of Curt Gooseneck - Custom Install Kit - C60633 Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

I had our warehouse measure the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch #C60633 you were looking at and it is 17" long x 9-1/4" wide x 3-3/8" deep as you can see in the included diagram. The Curt #C60633 is a…

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

The B and W Gooseneck hitch part #BWGNRK1320 that fits your 2019 Ram 3500 has special instructions for the handle since it's a 3500 but it's not necessarily because of the dually model. Their tip for this is: The handle may be difficult to…

The 2019 Ram 3500 has a factory installed crossmember mounted under the bed that acts as the install rails for a gooseneck hitch. All you'd need to do is to use the existing hole in the crossmember as a template for the hole that allows the…

The dealer made a mistake, the center of the king pin should be either directly above the center of the rear axle or forward of the rear axle. The problem that you will run into is that when you have the pin weight behind the rear axle it will raise…

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

In general you want your fifth wheel king pin to sit directly over your truck's axle or slightly forward of your axle and not two inches behind the axle. But the B&W Companion fifth wheel hitch allows this. It has brackets that allow for more…

I spoke with my contact at Lippert and I have a solution as to how to maintain your warranty and still be able to pull your fifth wheel trailer with the gooseneck hitch. She said that the use of any extension or gooseneck adapter will void the…

There is a retractable tonneau cover for your 2020 Ram 2500 with a 6-1/2 foot bed, Ram Box and Cargo Management System that will allow you to keep the rails on your truck and not have to remove them. The rails will be used as a way to install the…

I checked with Curt and the install of the Curt gooseneck hitch #C60633 does require lowering the exhaust by removing the exhaust hangers but there isn't any mention of the spare being removed. It will be easier with the spare out of the way…

B and W makes an excellent gooseneck hitch that fits your 2020 Ram 2500 with the part #BWGNRK1320 which is very easy to use, has a higher weight capacity, and is also made in the USA. I attached an install video for more info on this as well.