Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56189 Review Video

According to my research, the Aliner Ranger Trailers did come standard with 10" electric brakes so you will need to install a 7-way trailer connector and a brake controller on your 2007 Toyota RAV4 in order to tow it. For this, you will need a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You made really good choices with the T-One Vehicle Wiring Harness #118482 and Curt Trailer Hitch Receiver #C13163 and I can help you along with the installation of the harness (I also added a link to a video install of the hitch on an Outlander for…

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56189 is still able to be used on your 2018 Mitsubishi Outlander with factory tow package. The factory wiring at the tail lights will be the same as a vehicle without…

The only part of the Curt Trailer Hitch Receiver part #C13398 that will be visible once installed on your 2018 Mitsubishi Outlander PHEV will be the receiver tube opening. Therefore, the majority of the hitch will actually be hidden. I do have an…

I have a solution for you, but the Curt #C13079 is only a confirmed fit on the Mitsubishi Outlander Sport models. Instead, you'll want to use the Curt #C13163, which is confirmed for the Outlander (non-Sport and non- Plug-in Hybrid vehicles).…

As long as your Outlander isn't the plug in hybrid (PHEV), I'd recommend the #118482 for vehicles without the factory tow package or #118277 for vehicles with the tow package. If your vehicle has the tow package, it will have the tow package…

There are a couple of differences between the wiring harnesses for your 2016 Ram ProMaster. The biggest difference is the technology used. The Curt #C56270 uses what is called Surface-Mount Technology. Essentially what this does is almost eliminate…

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

If your 2016 Mitsubishi Outlander has the tow package then you would need the part #C56296 that you referenced. If you do not have the tow package or do not want to mess with figuring out if you do the install harness part #C56189 will fit either way…