2023 GMC Sierra 2500 Soft Truck Topper

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain…

The problem that you would run into with a folding cover such as #BAK72331 is if you leave it on but folded up flat it will be several inches above the truck bed sides. This means that when making tight turns the trailer's pin box could…

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

Hey Cory, thanks for reaching out! The Replacement Support Leg #TH33VK is for the 8-1/2" long Thule HideAway awnings which is what I believe will be a better match than the part #TH48VK you referenced, which is for a 10' long HideAway…

Yes we do. For a 2024 GMC Sierra 3500 HD Long Bed you will need the Gen-Y Gooseneck Trailer Hitch #GY73XR.

You'll need to measure the arm (pictured below) to determine the correct size gear pack replacement for your trailer's slide outs. For 2" x 2" you'll need #LC281331 For 2.5" x 2.5" you'll need #LC123356 For 2"…

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

The Adarac Pro Series Custom Truck Bed Ladder Rack #A4000964 is going to be one of the easiest ladder rack systems to completely remove from your 2017 Ford F-150 with the 5-1/2' bed and a tonneau cover. It attaches though the stake pockets unlike…

Although we do not have one that comes with it under a single product number like the #EQ64FR, it is simple enough to put it together. The Equal-i-zer Weight Distribution #EQ37141ET does not include a shank so you can add whichever one you need. We…

We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019 Ford…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…