bing tracking image
Q & A Icon

Is a Brake Light Relay Required for a 2014 Honda CR-V that is Using an SMI Tow Bar Brake System  

Question:

Do I need a brake relay when using an SMI brake system on a 2014 Honda CRV? I installed Hokins wiring kit : # HM56304. The SMI Brake system pushing the pedal when brakes are applied.

0

Expert Reply:

To determine if a vehicle needs a brake light relay like the part # RM-88400 you need to answer the following questions.

Are you using a supplemental braking system that depresses the brake pedal in your towed car?

No - You do not need a brake light relay.
Yes - You may need a brake light relay. Continue on to the next question.

Do the brake lights on your towed car illuminate while the engine is off?

No - You do not need a brake light relay.
Yes - You may need a brake light relay. Continue on to the next question.

Do your towed car's brake lights act as both the brake signals and the turn signals?

No - You may need a brake light relay. Continue on to the next question.
Yes - Your towed car has a combined lighting system. You will need a brake light relay to ensure proper activation of its signal lights.

Does your towed car have separate brake lights and turn signals?

No - Your towed car has a combined lighting system. You will need a brake light relay.
Yes - Your towed car has a separate lighting system. You may need a brake light relay. Continue on to the next question.

Are you wiring your vehicle with a six-diode kit or a TowDaddy custom wiring harness?

No - You will need a brake light relay to ensure proper activation of your towed car's signal lights.
Yes - You do not need a brake light relay.

expert reply by:
0
Jameson C

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>