Recommended Trailer Hitch For 2015 Subaru Impreza Sport Limited
Question:
I just picked up my new 2015 Subaru Impreza Sport Limited. Will the same hitches and wiring harnesses fit it that are available for the 2014 models? Thanks,
asked by: John P
Expert Reply:
Some of the same trailer hitch receivers for the 2014 Subaru Impreza fit the 2015 models. It depends on the specific model of Impreza because there was a larger vareity in 2014.
For your Sport Limited I recommend the Draw-Tite Sportframe, part # DT24959. It's a Class I, 1-1/4 inch hitch confirmed to fit. I've linked the install details as well as a video of it being installed on a Crosstrek. The process is very similar even though it's a different vehicle.
In addition to the hitch reciver, if you're going to be towing a trailer, you need the recommended ball mount, part # 3593. It includes a pin and clip but not a hitch ball. For a 1-7/8 inch ball use # 19256 or a for a 2 inch use # 19258.
You also need a 4-way wiring harness, like part # 118573, to power the trailer's lights.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Why is There Hitch for 2024 Subaru Impreza if it Can't Tow
- Q&A: Can 12 Volt Power Be Run With a 4 Flat Trailer Plug?
- Q&A: Where do the Springs Install on a 16K Reese 5th Wheel Trailer Hitch
- Q&A: 1-1/4 Inch EcoHitch InvisiHitch for 2015 Subaru Impreza
- Q&A: Trailer Hitch Receiver For 2024 Subaru Impreza Hatchback
- Q&A: Will the Hitches for a 2024 Subaru Crosstrek Fit a 2024 Subaru Impreza Sport?
- Q&A: Replacement Hardware Kit for Draw-Tite Class I Hitch # DT24959
- Article: Performance Chips and Modules
- Article: Trailer Hitch Receiver Sizes
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips
- Article: Which Hitches are Made in the USA