Trailer Hitch Fit Options for 2007 or 2011 Toyota Camry XLE w/ Dual Exhuast
Question:
I am about to buy either a 2011 Camry XLE or a 2007 Camry XLE. These cars have dual exhausts. Is there a Class II hitch available for either of these cars?
asked by: Joe
Expert Reply:
I checked with my contacts at Hidden Hitch, Draw-Tite and Curt, regarding the fit of the Curt # C12343, the Hidden Hitch # 90152 (no longer available) and Draw-Tite # 36416 Class II trailer hitches on your 2011 Camry. There would be absolutely no fit issue or interference with the dual exhaust. These hitches are compatible the 2007-2011 Camrys, so they'll work with either vehicle you referenced.
I'd recommend the Draw-Tite model, unless you were planning on towing with the hitch, in which case I'd go with the Hidden Hitch model which includes a ball mount.
For towing, you'd also need the trailer wiring harness. For the 2007 model, you'd need the # 118405 or for the 2011, use part # 118482. For a 2 inch trailer ball, use part # 19258 or part # 19256 for a 1-7/8 inch ball.
I've linked you to install videos for the part's I've mentioned.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 1-1/4" to 2" Hitch Adapter For Bike Rack On A 2011 Toyota Camry With The Draw-Tite 36416 Hitch
- Q&A: Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust
- Q&A: Can Thule Hitching Post Pro Fit on 2011 Toyota Camry
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Will a 1Up Quickrack Trailer Hitch Mount Bike Rack Fit Draw-Tite Trailer Hitch # 36416
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference In Factory Lifestyle Hitch And Frame Mounted Hitch 2021 Kia Seltos
- Q&A: Replacement Boat Trailer Hubs for #82655
- Q&A: Removal of Black Plastic Covering on Underside of 2011 Toyota Camry to Install Hitch
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting Brake Controller Installations