Can Weight Distribution be Used on a Boat Trailer with Straight Pole Tongue
Question:
I think I need a weight distribution hitch. All of the pictures show a trailer with a v shaped toung. I am pulling a boat. Do they work with them if the have the single tounge that goes back to a V?
asked by: Mike B
Expert Reply:
To use weight distribution with a pole tongue on a boat trailer you will need to use a pole tongue adapter. We have a couple of options. If you do not want to use sway control with the weight distribution you would use adapter # RP3280 rated for 7,500 pounds gross trailer weight and 750 pounds tongue weight.
If you do want to use sway control or your trailer is too heavy for the other adapter you would need # RP58393. The adapters simulate a 50 degree A-frame and will allow you to mount the weight distribution brackets at the proper spacing.
We also carry the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 600 TW # BLU45FR which will offer sway control and come with a 2" hitch ball mount included.
To choose the right capacity weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Also, if the trailer frame is aluminum you will need to ask the trailer manufacturer if it can be used with weight distribution.
I have included some links to the right on weight distribution and determining tongue weight for you.
Products Referenced in This Question
Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can a Weight Distribution System be Used on an I Beam Trailer
- Shop: Blue Ox Pole Tongue Weight Distributing Hitch Adapter
- Video: Review of Blue Ox Weight Distribution Pole Tongue Adapter - BXW4023
- Q&A: Weight Distribution With Sway Control Set Up for a Pole Tongue Trailer
- Q&A: Weight Distribution Recommendation for a 2010 Toyota Highlander Towing a 4,800 lb Boat Trailer
- Q&A: Recommended Weight Distribution System for 4500 lb Boat Trailer Towed By 2010 Toyota Highlander
- Q&A: Adding Weight Distribution and Sway to a Straight Frame Boat Trailer
- Q&A: Can Weight Distribution System be Used with Pole Tongue Trailer
- Q&A: Recommended Weight Distributing Hitch for Pole Tongue Trailer with 500 Lb Tongue Weight
- Shop: Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16" Hitch Ball - 10K GTW
- Shop: Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Suspension Enhancement
- Shop: Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Shop: Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: air bags
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: weight distribution hitch
- Search Results: trailer brake controller
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Video: Timbren Rear Suspension Enhancement System Review RU-18-TA-00302588
- Shop: Fifth Wheel Hitch
on Weight Distribution Hitch
