What are the Measurements on a Bulldog Square Swivel Jack # BD190758
Question:
How long is the outer 2.50 x 2.50 tube? What wall thickness When in closed position, how much inner tubes protrudes from outer tube? How many holes and spacing in the leg, total length? What size round tubing is used for collar to attach jack to trailer, length? When you give the length of the outer tube, is that taking into account the top cap/crank mechanism I know its allot of questions but need to model this part so I can determine whether it will fit our desired application. Thank you so much.
asked by: Don S
Expert Reply:
I pulled the Bulldog square swivel jack # BD190758 from our warehouse to provide the measurements you requested.
The jack is 26-inches in overall length, not including the handle. The handle radius is 8-1/2 inches for your reference. If the foot base plate is removed the measurement of the entire square outer tube is 24-3/4 inches. The wall thickness of the square outer tube is 0.135-inches. When the outer square tube collar is in the retracted position with the foot included it's 3-inches from the base of the square tube to the bottom of the foot. If the base foot is removed the measurement below the outer square tubing is 2-1/2 inches.
On the drop leg of this jack there are 5 holes and the total length is 17-1/2 inches. The holes are 3-1/4 inches apart from the center of each hole.
The external length of the mounting collar that connects to the trailer is 2-1/2 inches. The outer diameter of the mounting collar tube is 3-inches,and the inner diameter is 2.52 inches, with a wall thickness of 0.235 inches. The inner diameter of the collar that installs on the mounting bracket is 2.07 inches. This uses a pin and clip that will allow the jack to swivel.
I have included a couple diagrams and some videos for you as well.
Product Page this Question was Asked From
Bulldog Square Swivel Jack w/ Round Pipe Mount - Drop Leg - Sidewind - 28-1/2" Lift - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- Swivel Jack
- 15 Inch Lift
- Pipe Mount
- Weld-On
- With Rectangle Foot
- Bulldog
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bulldog Square Swivel Jack w/ Square Pipe Mount - Sidewind - 15" Lift - 3,000 lbs
- Q&A: Inner and Outer Diameters of Pipe Mount Piece for Bulldog Square Swivel Jack w/ Round Pipe Mount
- Shop: Bulldog Square Swivel Jack w/ Round Pipe Mount - Drop Leg - Sidewind - 28-1/2" Lift - 5,000 lbs
- Shop: Square Pipe Mount Swivel Jack w Footplate - Drop Leg - Weld On - Sidewind - 28-1/2" Lift - 7K
- Video: etrailer Trailer Jack - Side Frame Mount Jack - TJDP-7000S-B Review
- Video: Bulldog Square Swivel Jack with Round Pipe Mount Review BD190758
- Video: Bulldog Trailer Jack - Side Frame Mount Jack - BD190758 Review
- Shop: Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
- Shop: Square Pipe Mount Swivel Jack w Footplate - Weld On - Sidewind - 15-1/4" Travel - 3,000 lbs
- Shop: Bulldog Square Swivel Jack w/ Round Pipe Mount - Fixed Leg - Sidewind - 15" Lift - 5,000 lbs
- Shop: Pro Series Square Jack with Footplate - Drop Leg - Sidewind - 28-5/8" Lift - 5,000 lbs
- Q&A: What is the Difference Between Lift and Support Capacity on a Trailer Jack
- Video: Bulldog Trailer Jack - Side Frame Mount Jack - BD195362 Review
- Q&A: Worm Gear Winch Recommendation For Lifting 500 lbs Off of the Ground
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Video: Trailer Valet Trailer Jack TV-0002 Review
- Video: etrailer Trailer Jack MJ-1000B-MBB Review
- Search Results: trailer valet
- Q&A: What is Diameter of Trailer Valet Mounting Bracket Post
- Q&A: Dimensions of the Mounting Pipes on the Bulldog Jack part # BD190758
- Search Results: heavy duty trailer jack
- Q&A: Which Female Pipe Mount Works with Bulldog Trailer Jack BD190758
- Search Results: tongue jacks
- Search Results: city water inlet
- Search Results: timbren 7000 axle less
- Search Results: bulldog square jack
- Search Results: trailer jack
- Q&A: How To Determine Axle Rating Of Dexter Torsion Axles
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
on Trailer Jack
