Replacement Back Plate For Surco Spare Tire Mounted Cargo Carrier

Question

Question:

Hi. On the surco sparE tire monted cargo basket part # spsj4319 do u sell the mounting plate only n how much thanks

asked by: Hugo C

0

Expert Reply:

We do offer the mounting back plate for the Surco Spare Tire Cargo Basket.

To order this part you would need part # SPN550. This is offered as a separate item. This is designed to work for the Surco Spare Tire Cargo Basket, part # SPSJ4319.

expert reply by: Jeffrey L

0

Answer 1

While we don't have a confirmed fit for a 1997 Chevy Roadtrek Versatile 200 we do offer some options that have a pretty universal fit for your Class B Motorhome like the Adco Deluxe RV Windshield Cover for Class A, B, and C Motorhomes - Vinyl -…

view full answer...

Answer 2

The Surco Spare-Tire-Mounted Cargo Basket - 19" Long x 43" Wide #SPSJ4319 has a removable mount as you mentioned. The Replacement Back Plate for Surco Spare Tire Mounted Cargo Adapter #SPN550 is the exact same part as that which comes with…

view full answer...

Answer 3

I do have an option for you but the Surco Spare-Tire-Mounted Cargo Basket part #SPSJ4319 will not install on the 2015 Chevy Roadtrek 190P because of the way your spare tire carrier is mounted. The hardware of the Surco installs between the spare tire…

view full answer...

Answer 4

I do have an option for you but none of the hitch swing-away adapters will be rated high enough to carry 400 lbs. The Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks part #PVD20B would be our best option at 250 lbs. There's also the option…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 9

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Replacement Back Plate For Surco Spare Tire Mounted Cargo Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching